Is there a reference test code for Android to see if GPU acceleration is working on a device or not?

The subject says it all:
Is there a reference test code (available for downloading) for Android to see if GPU acceleration is working on a device or not once the AIR RC1 with GPU is installed ?
Perhaps something 'like' away3d info panel which shows if GPU is active or not...
I will try to build one in the meantime. Just didnt want to reinvent the wheel here.
TIA for any pointers. //GH

I agree with the above posts, it would be great to have a place with a list of already known problems, and a way for those of us with the time and interest to participate in making the FiOS experience better. Several thoughts:
1) Send a PM to a moderator here asking to participate in a test, or asking for improvements to the Forum. I have done that, some of the improvements I suggested have occurred (thanks Kathleen and CharlotteS), hoping more will; it can't hurt. And I understand my request to be a beta tester has been forward to development. At least one poster put that kind of request in a forum post and I think his was also forwarded.
2) Go to the following Verizon Products Trial site and sign up to test new things: https://www36.verizon.com/MM/Protected/TestTrack/SignIn.aspx. No guarantees, not much on the site right now, but if you sign up you might get to participate in the future.
3) Consider using the Verizon Direct forum at http://www.dslreports.com to report problems rather than the FSC (or after a frustrating experience with the FSC). You have to be a registered user to post in that forum, but I have had a good experience using it. Verizon employees monitor the forum and respond, and only they and you can see the details of your and their posts (one of the things I have suggested to the moderators here is something like Verizon Direct here).
I am retired, I have time to put into an effort to improve FiOS TV. Plus I have quite a bit of experience in testing new computer hardware and software before announcment and/or delivery to customers (IBM), so I think I could help (and I really don't think I could hurt it...). Plus in two more days I will have had FiOS TV for three full years, I have gone through all of the good (and a little bad.....) along the way.
FWIW...
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.5.0
Keller, TX

Similar Messages

Why is there no Adobe Shape CC for Android?

Android is the majority of the smart phone market share. Why is there no Adobe Shape CC for Android? Is the app for Android in development?

It's pathetic that Adobe has not to my knowledge stepped forward to even address this for those of us paying. I firmly believe Android users should receive $10 off minimum their subscription price since we don't have full access to the service. People have been begging for over a year now to have the Apple Apps converted and used for Android systems.. Especially since Android as so many have pointed out, is the majority of the market. Adobe is dropping the ball big time, and at least acknowledging that we have asked this question over and over and letting us know WHY, we might be a little more forgiving. Why, why, WHY?!

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

IMAC's Top graphics card frustration - Cheap and no support for Adobe Mercury Playpack Engine GPU Acceleration?

If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
Please, if you have a solution for me, let me know. Otherwise I find it pretty frustrating that I purchased a top-end iMAC, fully maxed-out in every way possible, and that the iMac doesn't support Adobe Premiere's Mercury Playback Engine GPU acceleration. Also, an old USB 2.0 Hub and thus the built-in SD card reader is slow. If you have SD cards with 95MB/s Transfer, Read and Write speeds, the iMAC will only transfer at around 30MB/s if you're lucky. Technically 480Mbs which is around 50MB/s but I haven't seen those speeds.
I figured this could at least be circumvented with a Thunderbolt SD card reader or a Thunderbolt to USB 3.0 adapter but of course no such thing exists.
Well, nothing with a reasonable price tag. This all might seem trivial to some but when you're uploading 24 hours of HD video footage from a 128GB SDXC card, the speed makes a big difference.
And come on, no BluRay support? Ridiculous. I get the politics of why but still, just ridiculous. It would be nice to be able to burn a BluRay to watch in my home theater system. There are other methods but BluRay is convenient and great for backing up large Video Files. Unfortunately BluRay looks like it's not going to make it. Maybe cable distribution companies will increase their Internet upload speeds one day and I can just store everything in the cloud and watch full length movies(that I've created) on Vimeo.
Anyways, I went and took a look at the hardware Apple stuffed inside my fancy (3.4 Ghz i7, 16GB 1333 DDR3, 2GB AMD 6970M, 256 GB SSD Internal and 2TB 7200 Internal) machine and it appears to be pretty middle of the range stuff. It's an iMAC, not a Mac Pro so why am I griping? Because my 2009 PC(which I tricked out over the last two years) is faster and does support the Mercury Playback Engine. I spent $2100 total on this PC which includes all my upgrades. I spent around $3300 on the iMAC. I feel ripped off.
Yes, I do love my iMAC on multiple levels but had I known my dated 2009 PC would render video projects faster, I would have gone with a MAC Pro or just a new PC. It seems that Mac is moving completely away from making high-end computers for niche markets(video editing) and focusing on their tiny laptops, IPADS and IPhones for the masses. Obviously smart from a capitalistic perspective(at present at least) but very frustrating for some.
I was actually told to purchase a MAC for video editing. I've been a PC guy for 15 years. I went with the iMAC because I had read many good things about it(probably just Apple propaganda) and also the MAC PRO was to be discontinued. Also the MAC Pro would have been triple the cost for what didn't seem like a whole lot more.
It's one's thing to prepackage a computer with inferior hardware(the iMAC I have is fast for most things and more than enough for 99% of the population) but to not allow us to pop open the computer and make a quit upgrade to the machine is what really makes me feel like I'm using a computer built for Grannies. I mean there is a reason my mother loves iMacs and Iphones. Amazing that I was able to upgrade my memory from 4 to 16GB but I've heard Apple has even done away with that. I get why they do it. Apple Warranty, Apple Care issues, Profit and World Domination: Apple wants a monopoly on everything.
Was great to see Adobe bounce back after the whole Flash/HTML5 thing and knock Final Cut Pro off the face of the Earth for good. People are still buying it b/c of the brand name but Final Cut is done. David Fincher used Adobe's Workflow for everything when he made The Girl with The Dragon Tattoo. Hollywood is making the shift and the world will follow. The Adobe Workflow has finally come together and there is just no way Apple can compete with Adobe Creative Cloud and an Engine that can just swap from Premiere to After Effects to Prelude to SpeedGrade to Photoshop to Story with speed for $29 bucks a month(or $49 for some). Apple better start supporting Adobe's Mercury Engine or they may have a problem. And if you're using Final Cut X, you're severely handicapping yourself. Problem is that people don't want to take the time to learn Adobe's products(steep learning curve for sure) which is where Apple's Granny software, and perhaps computers, comes in to play. Arnold Schwarzenegger once said "Milk is for babies, Real Men Drink Beer". I'm beginning to think that "Mac's are for Grannies, Real Men Use Adobe and PCs".
The major problem with Apple is you're forced to use Apple. Not sure but history has proven that people don't like to be forced into anything. Autocracies don't work. These systems eventually topple, even in the corporate world.
Amazon.com, now that's the company to emulate. What an amazing machine!
I've read that Apple may even discontinue the iMAC after 2013. Who knows?
If anyone has a solution for getting the Mecury Playpack Engine GPU acceleration to work with Premiere Pro CS6 on an iMAC 2011, please let me know. Like I wonder if you could Thunderbolt an External graphics card somehow? Or is an upgrade possible? Ahh...not worth the risk.
1) Graphcis Card - AMD Radeon HD 6970M 2048 MB (6990 would have been better or something from NVIDIA.
2) USB 2.0 Hub with only 480 Mb/sec
3) Seagate Baracude SATA I 7200 RPM drive with 3GB/s transfer rate and only a 32 GB Cach. It's ok. I would have expected at least a Western Digital Caviar Black 2 TB SATA III 7200 RPM 64 MB or the Velociraptor at 10,000RPM.
4)APPLE SSD TS256C Flash Drive. As you can see, it doesn't stack up so well against other SSD Drive.
Just average. http://www.harddrivebenchmark.net/hdd_lookup.phphdd=APPLE+SSD+TS256C

Whining and ranting about how iMacs can't do this or iMacs/orMacs can't do that is not going to get you a lot of help here.
Your "I love my MAC" is typical of the ever ubiquitous PC whiner.
If your video work needs were that computer intensive and critical , you should've done some online research and you should have budgeted for a Mac Pro.
Mac Pros are completely expandable and upgradeable unlike the iMac.
Mac Pros have much more faster and more CPU cores than the iMac line.
iMac line is limited to CPUs with 8 cores. The Mac Pros, I believe, are up to 16 core CPUs, now.
The Mac Pros can have their GPU upgraded and you even add/expand to use specialty audio/video cards.
Mac Pros are the defacto standard for real video work.
iMacs, even the high end model, is not really designed to do really heavy and intensive video work.
iMacs do do video creation and editing. Just not on the level that is needed from a more "Pro" computer.
It seems to me you are asking your iMac to do more than it was originally designed for, in terms of professional video editing.
You get a lot more out of a Mac Pro than an iMac for any real serious video, CGI or animation work.
You just didn't want to spend that much cash on one.
iMacs are not user upgradeable or friendly to user upgrades at all!!!
If you purchased a Mac Pro, you could've had that better, faster HD, better faster SSDs.
That said, I can offer no real help to but because of the nature of your post and the fact you just simply annoyed me, I feel some advice and explanations are in order
First off, you picked Adobe video editing software suite as your video creation software on the Mac. It's no secret to long-time video content creators on the Mac that Adobe products, especially those for video creation and editing are very user unfriendly on the Mac. Even though Macs are supported from Adobe, Adobe for a long time has treated the Mac and Mac users as second class citizens.
Before purchasing and installing Adobe Premiere, did you even check Adobe's site for the preferred system hardware and software requirements? Hmmm?
This is why you should KNOW what software you are going to be running on a computer first then research what computer make and model will run said software.
That's why Apple has its own apps like Aoerture, Logic and Final Cut.
Despite your ignorance in this matter, Final Cut Pro X is alive and doing well, thank you, and using this software on your iMac would kick Adobe Premier in the you know whats.
Final Cut Pro X is a complete video solution for and completely designed around the Mac.
Why are you using USB 2.0 connections for video work when you have a perfectly good FireWire 800 connection.
In case you are not aware, FireWire 800 is called so because it has a max throughput of 800 Mbps.
Your 2011 iMac can take up to 32 GBs of RAM. Not just 16 GBs.
This changed when the 2010 model iMacs came out.
Blu-ray? I believe you can buy external Blu-ray writers that work with Mac using said FW800 connection.
So you cite one movie and one videographer using Adobe Premier for your premise that Final Cut is dead in Hollywood?
Your argument that Apple locks you into everything in their world can be countered by saying Windows and Windows PCs lock you into the Windows world. What's your point?
Apple is not discontinuing their computers platforms any time soon.
All you are regurgitating is rumor. Probably from all of the PC crowd.
iMacs and professional desktop Macs are not going anywhere.
Currently, Apple is the only desktop/laptop computer maker that is still making a profit on their Macs and increasing their market share percentages for the last 5 years during which the PC market has continually slumped/dropped in its market share.

Is there any way in Firefox for android to use native handlers?

In Firefox for windows or Linux, I can register a URL handler (e.g. mailto:) but android takes this to a new level with intents which can register responders for individual URIs as well as for and mine types.
Are there any plans to natively support android intents (e.g. to handle a transition from twitter.com to the native twitter app), or perhaps an add-on to support something similar? I have already found https://addons.mozilla.org/en-US/android/addon/open-native-app/ but it's a manual process, rather than an automatic one.

http is a website, Firefox browses websites. We are not planning on kicking people to the native app for such things. We do support loading resources that list helper apps. For example if you load a Google Maps page there is an Android icon in the address bar that will take that page info and pass it to the Google Maps app.

Problems creating testing code for char[]

I'm trying to create code to test other code i've written but i keep getting errors..
This is the code i've written and it all looks ok with no errors
public class myString
private char[] a;
public myString(char[] a){
public void copy(){
        for (int i = 0; i < a.length-1; i++){
            char[] copy = new char[a.length];
            copy[i] = a;
}*and this is the tester code*public class myStringTester
public static void main(String[] args){
char[] a = {'a', 'r', 'r', 'a', 'y'};
myString.copy(a);
}when i run this i get this error
copy() in myString cannot be applied to (char[])
help please
Thanks in advance
Edited by: Hackzor on Aug 27, 2008 5:02 PM

Umm, your code doesn't compile.
You are trying to call a method, a static copy(char[]), which doesn't exist.

AIR 3.9 for android, how to load file in primordial worker

when i use AIR 3.9 for android version of my game, i can not load file in primordial worker swf.
I use the code below:
var loader : URLLoader = new URLLoader();
loader.dataFormat = URLLoaderDataFormat.BINARY;
loader.addEventListener(IOErrorEvent.IO_ERROR,
     function (evt : IOErrorEvent) : void
          trace("load file error: " + evt);
loader.addEventListener(Event.COMPLETE,
     function (evt : Event) : void
          trace("load file completed: " + evt);
loader.load(new URLRequest("./music/bgm/bgm_title.mp3"));
and already set the second parameter of "WorkerDomain.current.createWorker(swf:ByteArray, giveAppPrivileges:Boolean = false):Worker" giveAppPrivileges to be true.
this code can work on desktop AIR, but failed in android AIR, it tells a IOErrorEvent, and report "Stream Error".
So, is it a bug of AIR 3.9 for android, or is there somthing i missed?
Thank you very much for any help.

Hi,
The bug 3643406 is fixed now and fix is avaialable in AIR 4.0 beta build. You can download the build from http://labs.adobe.com/downloads/air.html .
Please share your feedback with us.
Thanks,
Nimisha

For those of you with a Windows computer and the iOS device is not syncing or showing up in iTunes. here is a known solution that has been working for tech support!

I know this seems to be an emerging issue ever since the update to iTunes 11.1.4, some iPhones or other iOS devices are not showing up in iTunes or syncing. I'm not sure if Apple really knowns of this issue, but tech support has a (mostly) sure fire way of resolcing this issue. It's only for Windows computers though.
Go to the article http://support.apple.com/kb/ts1538 and follow the Section 5 Verify Apple Mobile Device USB driver is installed. When you clik on that section, go to your version of Windows (it seems to be happening mostly across Windows 8) . And then to the section: If Apple iPod, Aple iPhone, or Apple iPad is listed.
The gist of what you need to do:
Windows 8 (since it seems to be the most affected) move your cursor to the upper ight corner of your screen) and click on the Magnifying glass. Type in devmgmt.msc and this should bring up the Device Manager. Onc eyou are in the device manager, look for the "Portable device" or "Universial Serial bus Controller" list, and you should see the "Apple iPhone/iPad/iPod" listed. Onc eyou see it, right click it, choose "Update software driver." Now, IT WILL SAY THE DRIVER IS UPDATED. I CANNOT STRESS THIS ENOUGH. Select "Browse my computer for driver software." Onc eyou choose that, select "Let me pick from a lsit of drivers on my computer." You should see the option "Have Disk." Choose that. Again, I KNOW you do not have a physical disk, but the file we need is already on your computer. After Hard Disk, choose Browse again. Follow this file path to the file we need: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.. In the Driver's folder, you should see the "usbaaple" or "usbappl64" (if you have the 64 bit for Windows). Double click on that file, and hit OK. The file should install, and once it's finished check your iTunes!!! You may want to unplug your device and plug it back it before doing all of this. I REALLY hope this works for you all as well!

How can I change my file extension from m4p to something else? I have had no success being able to play or burn my purchased music. I keep getting error 2122. If I can change the format I should be able to move it to another player or at least burn it in Nero. Thanks.
Angie

Error there is no source code for current location

Hi,
i am very new web tool customization this my first sample page for testing how the netpont.api.dll and netpoint.dll below i add code
pls guide me how to compile in aspx,iam very new
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using netpoint.api;
using netpoint.classes;
public partial class _Default: NPBasePage
    protected void Page_Load(object sender, EventArgs e)

There are a number of examples in the plugins directory. If you are on 5.9, look at the ones that have no .cs files.
The connection is created for you automatically in NPBasePage. I gave you an example of using it in your other post.
I can't give you a complete example because the forum does not allow script tags to be posted.
If you use the API objects you should be able to get most of the data you need. If you want to do a direct query of the db you can use ADO or the the DataFunctions, which are simply a wrapper of ADO. Following is an example of using the DataFunctions:
<%@ Control Language="c#" %>
<%@ Import Namespace="netpoint.classes" %>
<%@ Import Namespace="netpoint.api.catalog" %>
<%@ Import Namespace="netpoint.api.data" %>
<%@ Import Namespace="System.Text" %>
--script tag here
    void Page_Load(object sender, System.EventArgs e)
       // this is the object that contains the connection object
        NPBasePage bp = (NPBasePage)Page;
        Stringbuilder sb = new Stringbuilder();
        sb.Append("SELECT OrderID, AccountID, UserID, GrandTotal ");
        sb.Append("FROM OrderMaster ");
        sb.Append("WHERE CartType = 'O' AND AccountID = @acctid");
        DataParameters dp = new DataParameters (1);
        dp.Add(NPDataType.NPString, "@acctid", bp.AccountID);
        myGridView.DataSource = DataFunctions.GetDataSet(sb.ToString(), dp.Paramters, bp.ConnectionString);
        myGridView.DataBind();
--close script tag here

Can one help me design a perfect test code for database conncurrent access

Hi everybody,
I am stuck!! I want to test how a database server behaves when n (e.g. 100) users concurrently doing: connect, retrieve, update. Required is that all connections are kept open until the test is terminating. In other word, 100 users login at the same time, retrieving the data (different one) at the same time, and updating in the same time.
As a solution, I have let the main thread to create 100 threads in for loop, set them to be daemon, and call join() on them. The threads are of TestClass that implements Runnable. In the run method, I do the following in sequence: connect, retrieve, update, retrieve, end. The code is shown down (without cserver info and logging stuff for simplification purposes).
The problem is that the logger shows that the thread tasks are done sequentially, i.e.,
- thread(TH)-1 connects,
- TH-1 retrieves,
- TH-1 updates,
- TH-1 retrieves,
- TH-2 connects,
- TH-2 retrieves.
- TH-2... and so on.
I thaught that I will get something like: TH-1 connects, TH-2 connects, TH-1 retrieves, TH-3 connects, TH-3 retrieves, TH-2....
What did I do wrong? or my expectations were wrong? if the later is correct, what is the right way to establish a reasonable test class?
public class TestClass implements Runnable {
public void run() {
// connect me
Connection connection = getConnection();
// give me this amount of data
String[] data = getSomeData(connection);
// do some update
updateData(connection, data);
private void updateData(Connection connection, String[] data) {
// change data and save it back to the database
private String[] getSomeData(Connection connection) {
// get data
private Connection getConnection() {
// establish a connection and return it back
public class Main {
public static void main(String[] args) {
Random generator = new Random();
for (int i = 0; i < 100; i++) {
thread = new Thread(new TestClass());
thread.setDaemon(true);
thread.start();
try {
thread.join(); // main waits until all threads are done
} catch (InterruptedException iex) {
threadMessage("I have been interrupted!!");
}Edited by: greenearth09 on May 12, 2009 2:07 PM
Edited by: greenearth09 on May 12, 2009 2:09 PM
Edited by: greenearth09 on May 12, 2009 2:10 PM

Hi again,
I got strange behavior that never ends even if I used 5 threads:
Thread[] ths = new Thread[5];
for (int i = 0; i < 5; i++) {
      thread = new Thread(new TestClass());
      thread.setDaemon(true);
      thread.start();
      ths[i] = thread;
for (int i = 0; i < 5; i++) {
try {
ths.join(); // main waits until all threads are done
} catch (InterruptedException iex) {
threadMessage("I have been interrupted!!");

Is there a reference or manual for the BC4J component tags?

I can't seem to find any references for this specific topic, only thing that I can use is a book from google.books. the name of the books is oracle9i jdeveloper's handbook but because it is not for free they cut out some pages.
I was wondering if there is a site or a reference or a manual that I can use so I can have a reference with the <jbo:xxxx> tags
thanks for reading, any help would be appreciated! :D

ory about the dead link. Try this http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.v/navSetId._/oldNavId.0/oldNavSetId._/vtReset.true/vtTopicFile.working_with_jsp_adfbc%7Cdatatags%7Ehtml/
or http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.v/navSetId._/oldNavId.0/oldNavSetId._/vtReset.true/vtTopicFile.working_with_jsp_adfbc%7Cjsp_maindeveloping%7Ehtml/
Timo

Use a emulator to test AIR for Android app

I am using Flash CS 5.5 on a Mac to make an Android version of a Flash app. I would like to use an Android emulator to test the resulting apk file. I downloaded the Android Developer Tools but can't figure out how to install a apk file so that it appears in the emulator. Can anone give me step by step instructions? Since I'm on a Mac, I prefer non-command line statments. Also include needed publisher settings in Flash.
I'm also open to any Mac OS X based Android emulators that allows me to run an Adroid app directly from an apk file stored on my hard drive.
Thanks

Hi guys, any ideas?

Is there a loopback testing routine for the AT-485 card available on the web for free download?

The host p.c. we're using is in a remote location with no net or phone connection, so we need to hand-carry the routine on floppy or cd. Windows 95.

Hello,
You can easily do a loopback test with Hyperterminal, which installs with Windows and you don't even need to carry around floppy.
Serial Loopback Tutorial General information and how to do Hyperteminal Loopback test.

Use Preview on Device for Android on Mac - how to make it working?

We are using preview on iPad through USB connection on daily basis, but now we need to preview on Android as well.
I've tried setup on following page, but it's not working for me - i have USB Debuging enabled (it's nicely hidden on Jelly Bean 4.2.2 on our Nexus 7), but i can't see device in Folio Builder panel in preview menu (yes, i have Adobe Content viewer as front app)
http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c7b1f65ad12f28224932-7f f6.html
any idea, experience?
Thanks
Martin

Neil Enns - Adobe - We have followed these steps exactly.
USB Debugging is enabled... but the device NEVER appears in the dropdown...
We are using the native viewer app, exactly as you have described, and we still cannot get the preview on device to work?? IS there some other process we can use because the instructions in the link you just provided are not working at all.
See my comment above:
"Tried everything suggested in this thread but with no luck.
The mac we are building on is running OSX 10.9.3 and InDesign CC (up to date)
Android tablet is a samsung note, running Android 4.4.2 (developer mode / USB debugging enabled)"

IFrame with code for video doesn't load in iWeb but works in Safari?

I've got a strange problem... I have encoded several videos using H.264 as .mov files and then import them into a flash file. Flash 10 plays these files just fine. However, when I put this on an iWeb page using an iFrame the video never loads. If I go ahead and publish the pages I can open the pages with Safari and see the videos just fine. Why won't iWeb loads these videos so I at least see a preview of the first frame? Instead, the Flash skin progress bar just keeps running and never stops. The path is valid obviously since the actual pages work when viewed with Safari.
Here is the code I'm using in the HTML snippet:
<IFRAME SRC = "http://xxxxxxx.xxxx.net/FLASH/PL2009/PL2009.html" WIDTH="320px" HEIGHT="280px" FRAMEBORDER="0" --if "0" no border, otherwise "1" with border MARGINWIDTH ="0px" MARGINHEIGHT="0px" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>

Wouldn't that lose the skin etc?
One interesting thing I just tried is that I renamed the H.264.mov file so it had a .flv extension. I then went to Flash CS4 and opened the Flash document and re-linked to the .flv file and then re-published it. I then FTP'd all of the published files to my host and then went to iWeb. I clicked on the existing container and then clicked "Apply". Low and behold the movie loaded just fine!
So, I'm left to assume that iWeb cannot load H.264.mov files via an iFRAME unless you change the extension. Like I said, everything actually worked on the web site it's just that iWeb didn't load the video and it was annoying to see the buffer bar in a continuos update mode.
So what are your thoughts on this? Thanks!
Message was edited by: Bruce Carillon1
Message was edited by: Bruce Carillon1
Message was edited by: Bruce Carillon1

Is there a reference test code for Android to see if GPU acceleration is working on a device or not?

Similar Messages

Maybe you are looking for