Is there a 'repair' option in DW CS4?

Dreamweaver just got stuck when I was saving a style sheet. I have switched off completely and re-started my computer but DW still tells me that my CSS files 'appear to be html' and all the external style sheet CSS options have vanished.
Is there a 'repair' option for this software? I have CS4 web standard. I looked in Windows Control panel and only found the uninstall option, if I am re-installing on the same computer do I still have to de-active the product?
Grateful for some advice

No there is not a repair option. You really should de-activate your suite from another product if you can get in. Because many cases the uninstall does not work well and most people have to use the CS4 Clean Script which erases the activation and if you did not de-activate the product you would have to go through a process. If you are still able to get into DW though, make sure you Export all of your Sites to back them up because once you re-install the suite the defined sites will no longer be there.
Adobe - Adobe CS4 Clean Script

Similar Messages

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

When I go to disc utility, repair disc is not functioning, neither is the verify disc. There is a statement that says,"start up from the mac OS X intallation disc and then choose utilities Disk utility. However there is no option for that

Verify disc and repair disc are not working. They give me the option to install the "installation disc" click on utilities>Disk utility from there. When I try this, there is no option to do this that I can find. Can anyone help me to do this?

You can't run Repair Disk from the Utilities folder. With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion or 10.8 Mountain Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 or 10.8 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.

Is there any repair full load option in DTP?

Hi Experts,
I have run delta DTP from Cube A to Cube B with selection less than or equal to 31.03.2004 and I want to run grater than 31.03.2004. Now the problem is this load is not bringing the required records because data mart symbol is already set in Cube A.
How do I extract grater than 01.04.2009?
Is there any repair full load option in DTP?

Hi,
I am afraid that we have only full and delta options available in DTP, but the several other options available on extraction tab will enable us to do something similar to it.
If you looking to get data after 31.03.2004, in you selction condition change the from date to 01.04.2004 and try extracting, I am sure it will give you the desired records.
Please follow info on this link and decide which would suit to your requirement, if you get stuck, post back and I'll try to assist you.
http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm
Regards,
Ray
Edited by: Rayapa on Apr 4, 2009 9:04 AM

My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?

The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!

Unable to access disk repair option on OSX Install CD

I tried to do a disk repair from the Install CD - I opened Disk Utility from the Installer menu, clicked on the Mac Harddrive in the left hand column and clicked on First Aid.
While the Repair Permissions was accessible, the Disk Repair option was greyed out.
I did not see any option to choose language during this process.
Can someone please help?
Thanks

That IS the version for some iBook G4s anyway, not certain which one you have though. Did this come from Apple with those Disks?
I don't understand why the Language never showed, or why it "thinks" the Hard Drive is in use, which is what causes that grayed out thing.
Does it Verify from the DVD?
Do you have an Open Firmware Password set perchance?
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.

HT1222 Everytime i try to open my itunes icon it says "This version of itunes has not been correctly localized for this language. Please run the English version". Then there is no option and i dont know to do this. Please help.

Everytime i try to open my itunes icon it says "This version of itunes has not been correctly localized for this language. Please run the English version". Then there is no option and i dont know to do this. Please help.

"This version of itunes has not been correctly localized for this language. Please run the English version".
Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

Need to repair volume but no repair option available

This started when I tried to update iTunes to 7.0.2 so that I can use my iPod. Basically iTunes won't install so I verified and repaired permissions, (still wouldn't all the upgrade). So, I verified the disk and received the following msg:
Invalid sibling link
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
...yet there is no "Repair" option available. Can anyone point me in a direction here?

You cannot repair the active startup disk. You can either boot from another disk that has Mac OS X on it, boot from the Mac OS X Installation CD/DVD, or boot into single-user mode.
To boot from the Mac OS X Installation CD/DVD, place the CD/DVD in the drive, reboot and when you hear the startup chime either:
- Hold down the 'C' key to try to automatically boot from the CD/DVD drive.
- Hold down the 'option' key to load the Boot manager. You can click on a small icon of the Mac OS X CD/DVD and click the forward arrow button to boot from it.
Once the Mac OS X Installation CD/DVD loads, you can run Disk Utility to repair your disk.
To boot into Single User Mode, reboot your computer and hold down the 'command' and 'S' keys when you hear the startup chime. Keep holding them down until you see white text scrolling across a black background. When it stops, you will see at the bottom a command prompt ending with the # character. Type the following command:
/sbin/fsck -fy
fsck will go through several phases where you will see various bits of verification information and other informative bits. If, when it finishes, you see the message:
** The volume (nameofvolume) appears to be OK
You can reboot your computer by enterin the command:
reboot
If, on the other hand, you see the message
*** FILE SYSTEM WAS MODIFIED ***
You should re-run the above fsck command until it no longer reports this message. Reboot your computer when you are finished.

There is no option to save,create or discover any php file

This just started today 22/06,but there is no option to create a new php file,the options to create all types of files
except php show on main screen,there is no discover dynamic files showing in bar,i can still type in the browser
to view the php files i have already saved but cannot create new php files,any body got any ideas,i think its a
problem with software.

OK. When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences. Note: this will wipe out your custom settings, extensions, etc... so back up what you need.
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.

T23 Advance repair option/Monitor?

Entitled T23 Advance repair option/Monitor?
Background: T23, 2647-2TU, 640 MB ram
Dual boot set-up with Linux and Windows XP Pro.
I have been using Linux since XP is dangerous to use on Internet, hence, prefer not to use unless this would be the easiest and best way.
Need suggestion about how to rule out both OS's and see if the T 23 has advanced repair options?
Ref 1 Article:
https://forums.lenovo.com/t5/ThinkPad-Edge-Knowledge-Base/S440-black-screen-with-flickering-cursor-a...
Purpose of Posting:
While in Linux the program stuck (not sure here, the monitor screen froze, but the T23 keypad may have been operational, see below in Possible cause to explor.). No mouse movement. I was able to hold down power button 5-8 seconds and turn off. Restarted and everything looks ok.
This had happened once before while in Linux.
Questions:
Would the advanced repair in Rescue and Recovery (Need to check version?) partition option address the T 23 computer system only? Anotherwords, could fix the problem without having to query each program?
Would this be a good place to start?
Any particular additional suggestions, if using the advanced repair option, I should know (other than how it was used in the Ref 1 Article above) excluding the windows instruction section?
Possible cause to explore:
I added a different monitor which plugged into back to a D connector. In the past used the Think pad screen. Also in the past, I have used a USB optical mouse that worked well in many sessions. In any case if the keypad was fully functional, what key or combination would bring the plugged in monitor back?
Or, just unplug monitor and let the T23 monitor start functioning?
If the responder would like to respond in small steps, thats ok with me if its easier for you. I plan to make this a top priority and will be looking for response frequently in the day.
Any assistance will be appreciated.
Thank You,
Bob
Ref 2 Article:
https://forums.lenovo.com/t5/ThinkVantage-Technologies/T61-Lenovo-Rescue-and-Recovery-BSOD/td-p/1669...http://forums.lenovo.com/t5/ThinkVantage-Technologies/URGENT-gt-Rescue-amp-Recovery-quot-Previous-Ve... I think you should try to downgrade your R&R version?
Update:
Just unplugged monitor and am running on Think pad monitor. We will see if T23 freezes again.
Solved!
Go to Solution.

Freezing of the system can be from several sources, both hardware (most likely) and software. My suggestion to you, since you have a T23 and I'm very familiar with this system, is to try the following things:
1) Run a memory diagnostic. Get a copy of memtest86+ from http://www.memtest.org/#downiso Several media are available: floppy, USB or CD. Use whatever is easiest for you. Boot the diagnostic program and let it run for several hours. Ideally you want to program to execute at least three full passes of all the test patterns.
2) Run a hard drive diagnostic. Most hard drive manufacturers have released a diagnostic program that runs some simple checks. They are "non-destructive" in that they do not write any information to the drive. That said, you should probably backup your entire drive before running such a program. There are several good disk backup programs out there; if you need some advice, just ask. For hard drive diagnostics, Seagate has a program called SeaTools, Hitachi/IBM has DFT and I think Fujitsu has FJDT.
IBM, and then Lenovo afterwards, used to have a program in their software download library called PC Doctor for DOS which came in specific versions for most Thinkpads. It was what the factory recommended people to use when diagnosing hardware problems. However, several years ago the license to distribute the program by Lenovo was not renewed and from that point on all PC Doctor software for the Thinkpad was withdrawn.
Doing those two things should eliminate the memory and hard drive from being the source of your problem. However, my initial thought is that your T23 has developed a fairly common problem: loosening of one or more components on the motherboard. It's a known problem, at least by us Thinkpad geeks. Normally this type of defect is seen as a power-on failure; your laptop refuses to boot and the only thing that seems to be functional is a wildly spinning fan. To a lesser degree, this freezing problem can be encountered at random times after the system has been operating normally.
Warning: Doing the following procedure could "permanently" freeze your system. If what I suspect is the problem, it CAN be fixed but it requires a full disassembly of the system, removal of the motherboard and some soldering.
Run a program that you can easily tell if it stops for any reason; play a video or MP3 file, for example. While the program is running, put your left thumb on top of the palmrest in the lower left corner, your fingers under the system (where the memory bay panel is) and "bend" the corner of the laptop "up" and then "down". What you are trying to do is put some pressure on the case so that it twists the motherboard slightly. In some cases, this is enough to induce the "freeze".
As far as the Rescue and Recovery utility is concerned, I've never used it myself on a T23. It is meant to be used to reinstall Windows to a state it was at when the laptop was first sold (i.e., circa 2002). Assuming that the hidden partition is still available, running it now will regress Windows to a pre-SP1 version. While I do not share your view that using XP at this point in time to access the internet is "dangerous", it certainly would not be recommended to use something as old (and un-patched) as that. I also do not know for sure if running R&R will affect your dual-boot configuration, but my guess is that it would. All of your previously installed programs will be erased, along with any of your files when you do this operation.
If you are using an external monitor and would like to switch between it and the LCD panel then you should be able to use the Fn+F7 key combination. Hold the Fn key down then press and release the F7 key. Doing this successive times will cycle the active display between the LCD, the external monitor only and then both active.
Took me a few minutes to find a good example but read this thread at TPF: http://forum.thinkpads.com/viewtopic.php?p=274956#274956
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

11" MBA cracked display repair options in Houston, TX?

(2) small spiderweb cracks appeared yesterday in lower left quadrant of my MBA that I received as gift last Jan/Feb. MBA was fine before I left to grab lunch. 30 mins later there they popped up. Strange... it resides 99% of time on top of my desk, nothing sits on it. Apple Store rep Justin says those cracks are user caused 100%, no other reason, not even mfg or design defect, because those have points of impact. Says maybe I either set something on top of the lid (but he backed off because he didn't see or feel any dent on it) or I had tried to close the lid while something was sitting on the keyboard thus causing the 2 points of impact.
I mentioned the loads of user complaints in Apple forums about MBA cracked screens and was dismissed. I was too frustrated to even want to talk to his senior rep. Repair quote as of 1/16/13 for one 11" display $340 + labor $40. I am still deciding if I need it repaired so soon or can I wait longer.

Any other repair option in Houston, TX that can replace my display for cheaper?

Server 2012 cluster repair option

Hello
Can anyone tell me what a repair actually does to an offline cluster? I cannot find it in technet or msdn.
Thanks

Hello, Tim, sure thing.
I have a two node Windows 2012 server cluster. A few SQL installs are nested in it. I am having some issues and from inside Failover Cluster Manager under the Cluster Core Resources when I right click the name of the cluster and go to "More Actions"
there's a greyed out "Repair" option. I know to use the repair option I have to stop the cluster.
I want to know what the repair option actually does. I cannot find any documentation on it anywhere.
The issues that I have are two fold, first the local "cliuser" account on each node password is trying to reset itself, when it is setup for never change and never expire when I view the properties in the local user. Secondly in my Cluster event viewer
my resources are seeing errors for DNS "the handle is invalid". My DNS is server 2003. I've already applied hotfix 2838043 to both nodes.

Disk Utility says HD, "needs to be repaired" Options?

Using Disk Utility to Repair Permissions has worked fine, but when I "Verify Disk" I get this:
"Error: The underlying task reported failure on exit" among other text. It says that our HD "needs to be repaired".
How do I do this best? What do you all recommend?
Is Disk Warrior the only/best option?
Is there another app that I should use first?
Is there a free option, using a built-in utility?

On an intel mac you cannot run OS 9 or classic so there is no need to worry about OS 9.
If you have the same problem and Disk Utility cannot repair the drive and you decide to do a reinstall you can either do a archive and install, which would not remove your old data and files but would just replace the system with a new one. Chances are that will not fix a problem with the disk directory.
If you want to reformat the drive and reinstall the everything will have to be reinstalled from scratch as it will all be erased.You system restore disk can be used for this and then any third party apps you have will have to be reinstalled.
Before doing either, I would recommend that you do a complete backup to an external drive using Carbon Copy Cloner or Super Duper or some other backup application.

2 wk old Palm Pre Plus... When slide closes, shuts off.. Daily.. Repair options..

Having worked for Blackberry/RIM in the early days I'm well versed in smart devices. I even worked for a company and did support for Palm Pilot's.
Here's the deal. 2 or 3 years ago when Palm Treo 750 came out my friend needed a new phone with a plethera of options so I purchased her one as a gift. Wonderful phone. That phone had run it's course and do to a sticking qwerty keyboard needed a replacement.
So I think "Palm Pre Plus.. Wonderful options, great phone design.. and Palm quality like we had with the Treo."
I bought her a Palm Pre Plus again as a gift, not through a carrier. Her carrier is AT&T by the way. It was brand new. I know this because I got the phone before I gave it to her.
She's had it two weeks so far. And it's having the what I've found through research to be the notorious "shutting off" problem. Whenever she closes the slide, and apparently now even when it's just sitting and gets moved, it shuts off and needs to manually be turned on again. No it's not the screen's sleep feature. It does this daily at the very least, if not multiple times a day.
Having researched this problem on this forum looking for a fix using threads with the same problem I had her try running OS doctor not thinking it would fix as I read another thread on this site saying it wouldn't. But it was worth a try at least. And it didn't help at all.
I told her then to contact palm hoping for some support. Due to Palm's North American Tech Support closing at 8pm, her long work hours and potentially costing money for support. I had her use Palm's 24/7 Online Chat Tech Support.
They told her today to contact her carrier. I don't believe AT&T will cover it with a replacement because the phone wasn't purchased on her AT&T account.
At this point I'm really unpleased with palm, and spending my hard earned money on a product that has apparently(from the threads I've read on this forum) a known defect.
She is going to try phone support tommorrow to see if they can be of more help. I'm upset at palm enough that if phone support is of no help tommorrow with supporting a 2 wk old phone that is clearly defective... To say I will be upset with Palm will be putting it mildly. This is obviously a device malfunction that palm support should know about and has happened in other cases.
Are there any other options through Palm for getting it repaired or even sent back for a replacement?
Post relates to: Pre Plus p100una (AT&T)

The first shutting down issue was related to a bad batch of batteries in some of the original Pre's that were a tiny bit too short. These were changed out by Sprint, and I wasn't aware of any AT&T branded phones that had this issue! Mine has never exhibited this behavior.
A simple home-made fix suggested on other webOS related forums was to use a piece of folded paper inside the device to hold it tighter against the gold contacts.
The problem-causing batteries had hollow "legs" at the end - the newer corrected ones had solid "filled-in" legs that fit tighter.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

In the previous version, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

in the previous version of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

Hi silvano,
If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
Start in Cell B2
1 Tab 2 Tab 3 Enter
4 Tab 5 Tab 6 Enter
7 Tab 8 Tab 9 Enter
Now you are ready to type into B5 .
Another way that some people find easier is to enter one column at a time
Start at B2
1 enter
4 enter
7 enter
etc.
Now start with C2.
Use whatever suits your work flow.
Regards,
Ian.

Is there a 'repair' option in DW CS4?

Similar Messages

Maybe you are looking for