Is there a replacement in Soa Suite 11g for RDBMS Events?

I'm looking for the best way to integrate a database with OSB resources. What I need is that for each new record into one table in a Database, triggering an execution of an OSB service, but I have the ability to use any component of the SOA Suite provided they can finally claim a OSB Proxy Service.
I have experience resolving a similiar scenario with Weblogic 8.1 using RDBMS Events, but that they were deprecated, is there a similar component? I was searching on EDN but did not find the possibility to connect to a DB
Thank you very much for your time

May be you are looking on polling ability of DB Adapter which is definitely an option but I always suggest to use Oracle GoldenGate for such use cases.
Regards,
Anuj

Similar Messages

Installation of SOA Suite 11g for development purpose

Hello All,
I wanted to install SOA Suite 11g for development purpose on my laptop (OS Windows XP).
As per installtion prerequisite process in the download page of oracle.
I found the following pre requisite - installation of Oracle DB 11g EE(although i am having Oracle DB 10g R2 10.0.2.0 - now the problem is i am not able to run RCU in this data base, so i installed 11g)
Jdev 11g Download
Web Logic Server
RCU Utlilty run
then SOA Suite installation.
My doubt is , is there any SOA development installation available because 11g DB EE takes lot of space in my system.
if available please provide the link.
Thanks & regards
Aboothahir

Hello Anuj,
Thanks for your reply,
I am running RCU utility on the XE Database.
I am getting the following error:
RCU-6083:Failed - Check prerequisites requirement for selected component:OIM
Please refer to RCU log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Error: JVM is not installed on the Database.
RCU-6092:Component Selection validation failed. Please refer to log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Please provide a solution for this.
Thanks & Regards
Aboothahir M

"Oracle BPM Suite 11g" and "Oracle SOA Suite 11g" components

Dear Friends,
I am very confusing about the "Oracle BPM suite 11g" and "Oracle SOA Suite 11g" and would like your help on explanation as the following :
I have learn that In order to use "Oracle BPM Suite 11g" require to have "Oracle SOA Suite 11g" components to install first. Does it means that :
1) When we buy "Oracle BPM Suite 11g" , we automatically get the "Oracle SOA Suite 11g" components as well ?
2) IS it correct that these " these Oracle SOA Suite 11g components" are included :
(a) Oracle BAM
(b) Oracle Business Rules
(c) Oracle BPEL Manager
(d) Oracle Service Bus
(e) Oracle Complex Event Processing
3) Do we have a right to use all of these components listed in (2) ?
4) Then the answers in (3) is "YES", then Is it correct when the customer buy the "Oracle BPM Suite 11g" , they no need to buy "Oracle SOA 11g" any more when they would like to implements that applications based on SOA in the future (without using BPM) ?
5) What IF , the customer would like to start with "Oracle SOA Suite 11g" product and decide to buy only Oracle SOA Suite 11g first ; then later on in the future they would like to implement BPM projects in the future. Can you upgrade "Oracle SOA Suite 11g" to include "Oracle BPM Sutie 11g" and pay only the price different ?
I hope you can help providing the answers to these questions. THank you very much in advance.
Best Regards
Pearapon S.

This is a question best answered by your Oracle reseller or Oracle account manager to give you all the details but I hope this brief answer helps:
- The Unified Business Process Management Suite (BPM Suite 11g) includes: BPM Studio, BPM Composer, BPMN Service Engine and Workflow Extensions, BPM Process Spaces, and BPM Process Analytics.
- BPM Suite 11g requires the licensing of SOA Suite 11g for Oracle Middleware which requires a license for WebLogic Suite.
- You can license SOA Suite 11g now and license BPM Suite 11g later.
Since the products are layered, I don't see this cutting into SOA sales at all. My personal view is that BPM on top of SOA is brilliant since it provides easy integration between human and automated tasks, builds on many of the SOA concepts that are key for a successful BPM implementation (functional, not the Oracle product), and uses the same IDE. The synergies extend past easy use of services; the same business rules and human workflow components are used between both products.

Is there any .obr files related to Oracle SOA Suite 10.1.3.1.0 ? if yes then i want to open that .obr files in Oracle SOA Suite 11g environment

is there any .obr files related to Oracle SOA Suite 10.1.3.1.0 ? if yes then i want to open that .obr files in Oracle SOA Suite 11g environment . is it related to Oracle Business Rules ?

Did you find a solution to this issue? We are having a similar issue trying to deploy a Paypal IPN on OAS 10.1.2.3. The IPN messages coming from Paypal appear to be attempting an SSLv2 handshake. In our case SSLv2 is disabled due to our security requirements so the connection is killed by our App Server. We have found that manually sending the IPN messages works correctly.

SOA Suite 11g Admin console EM link

I have installed SOA suite 11g onto a windows XP machine with a local loop back network adaptor. When I go to the WebLogic Server Administration Console home page the link for the Oracle Enterprise Manager is picking up the loop back network adaptors IP address (10.10.10.10). This results in the link not working when accessed over the network. I can replace the local IP address with the machine name or DHCP IP address within the browser to work round the issue. However, is there any way to correct this and re-configure the link to use the actual IP address like the other links?
Regards
Neil

Another way is to get rid of the Loopback Adapter (ie unconfigure it) and just install it. WLS has no issues with DHCP environments.
--olaf

Error message deploying a composite in SOA Suite 11g

Hello,
We are attempting to deploy a composite to SOA Suite 11g (11.1.1.3). We're getting an 'Unable to register service' error message. When I inspect the log files I see the following entry as the first error:
Failed to retrieve policy[[
oracle.wsm.policyaccess.PolicyAccessException: WSM-06146 : Error deleting the attachment entries.
Anybody have any experience with this error? The error message reference has the following listed:
WSM-06146: Error deleting the attachment entries.
Cause: Failure occurred while deleting the attachment entries.
Action: Ensure that a valid list of policy subjects for deactivated lifecycle type is passed
Level: 32
Type: INCIDENT_ERROR
Impact: Configuration
I don't know how to "ensure that a valid list of policy subjects for deactivated lifecycle type is passed". Please help!!!!
Thanks,
jh

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

How to configure something similar to optSoapShortcut in SOA Suite 11g

Hi,
We are migrating processes in BPEL 10g to composites in SOA Suite 11g (11.1.1.5). In one of these processes we are extracting the ws-addressing elements replyTo and MessageID from the SOAP header from the calling process and saving these values into a database. They are later used to be able to reply back to the calling process. In 10g this was no problem but in 11g calls between processes are automatically optimized, meaning that they are not communicating using SOAP. Hence, it seems like we can't get the soap headers the normal way.
According to the Administration Guide for SOA Suite 11.1.1.5 the optSoapShortcut property has been removed which could be used in 10g to specify if the calls should be optimized or not. Is there any other way to configure this in SOA Suite 11g?
If not, is there any way to instead extract these elements from some BPEL API or similar?
Thanks!
Best wishes
Kerstin

For release 11g, SOAP optimization is automatically configured. Therefore, if you upgrade your projects from 10g to 11g and are using the optimized shortcut approach in existing applications, note that optimized calls are activated only when the hostname value (as referred to in the WSDL URL in the composite.xml file) matches the Server URL value. Either set both values to the hostname (for example, myhost) or to the full domain name (for example, myhost.domain.com). If these values do not match, a regular SOAP call is performed instead of an optimized local call.
You can still control this using oracle.webservices.local.optimization property.
http://docs.oracle.com/cd/E15586_01/web.1111/b32511/configuring.htm#WSSEC3522
Refer to "Controlling When Local Optimization is Used"

How to deal with any UDDI in SOA Suite 11g?

Hi folks,
I have spent quite some time trying to understand how Oracle is dealing with the UDDI aspects in the Soa Suite 11g.
Back to Oracle AS 10g, I remember, even though i had never used it, that the UDDI repository was a out of the box capability with a very nice Web UI to browse the services The Aqualogic Service Bus seems to have features to consume/publish web services in any UDDI, but no real embedded UDDI in its core.
Since 11g, obviously the way to go is to adopt Oracle Service Registry. There is a seamless integration with JDeveloper 11g (i.e create a UDDI connection to publish/consume/search web services).
My company is keen to go on a open source UDDI and I came to the conclusion that any of those (i.e jUDDIv3.02, OpenUDDI) are actually able to work properly with JDeveloper 11.1.1.2. I got XSD exception or other cabalistic errors that definitely show that JDeveloper 11g can only deal with Oracle Service Registry. I heard that the Soa Suite 11g could only deal with UDDI v2 and v3. CentraSite does fit those requirements but does not work too.
Why is that ? How can I set up my SOA initiative without having the choice on the UDDI ? Does this have changed since PS2 ? I have tried to look up on Metalink and I got a hit on jUDDI but it does clearly state that jUDDI works well now with JDeveloper.
Any answer on that would be highly appreciated.
Kind regards,

Hi,
DVM cache policy is lazy load. there is no option to preload the cache with server startup currently. However this would be affecting only the first request the susequent requests are serviced from cache.
HTH..
appologies for reaching on this late.
regards,
Jitendra

Configure .p7b(PKCS #7 Certificates) in SOA Suite 11g - Enterprise Manager

Hi,
currently configured .jks file in em - weblogic domain - security - security provider configuration which is used by owsm policy to validate my incoming signed soap message.
(incoming message is signed with the same jks file). so it is working fine.
Now I got .p7b(PKCS #7 Certificates) file from customer, so I need to replace this with my existing .jks file. How can I do this?
Appreciate your quick inputs.
Thanks

customer site is invoking my soa suite application,public portion of the certificate which I got from them I configured at my end(.p7b converted in to jks). with the private key (which I do not have with me) the customer site is signing the soap request and hitting my soa suite.
Getting following error in my soa suite side(soa_server1-diagnosis):
X509 Certificate will not be advertised due to underlying exception "oracle.wsm.security.SecurityException: WSM-00057 : The certificate, abc.org, is not retrieved. The following aliases are found in the keystore:- [defnet.org, klmca.org, abc.org, ]".
while converting in to jks I gave alias, I do not know what value should I give. I found
subject: CN=abc.org... in .p7b file, used the same name as alias.
converted .p7b file in to .cer as suggested by anuj, .p7b file contains 3 certificates,so imported 3 times in to same key store file like this
keytool -import -alias abc.org -file xyz.public.cer -keystore xyz-keystore.jks
keytool -import -alias klmca.org -file klmca.public.cer -keystore xyz-keystore.jks
keytool -import -alias defnet.org -file defnet.public.cer -keystore xyz-keystore.jks
Where I am doing wrong here?
Can I configure directly .p7b(PKCS #7 Certificates) file in enterprise manager (soa suite 11g ps3.). I converted in to jks file and configured but it is not working.
Please suggest. This is urgent. Appreciate your quick help.
Edited by: 798585 on May 20, 2011 12:00 AM

Truncate all Instances in SOA SUITE 11g BPEL SOAINFRA SCHEMA

Hi Guys!
We are running Oracle SOA SUITE 11g + BPEL, Version 11.1.1.3.0 (PS2)
We running out of disk space issues in a database due to large number of test instances in dehydration storage.
Is there any way to TRUNCATE all tables in order to clean up instances from BPEL engine (SOAINFRA schema)
Oracle provides this functionality (purge scripts and implemented procedures in a database) but this is a deleting approach and it doesn't work with millions of instances in a storage. Deleting instances from GUI doesn't work at all.
1. We are looking the way to truncate all instances in a database rather then delete them which takes ages and doesn't work properly in case of huge amount of instances.
2. We would like wipe out all instances without any time restrictions.
Any feedback, script from you guys would be much appreciated.
Cheers!!

Hi,
There still no solution for truncating tables. Looks like we have to look into Oracle's procedures in delivered with SOA SUITE installation.
I posted an article about deleting large number of instances in SOA Suite 11g. It does the job in a pretty fast way.
[Delete large numbers of instances in Oracle SOA Suite 11g|http://emarcel.com/soa-suit/152-deleteinstancessoasuite11gwls]
Cheers!!
emarcel.com

PGP Encryption support in SOA Suite 11g

Hi,
Looking for PGP encryption support in SOA Suite 11g as we have a requirement to encrypt the file using PGP encryption and send over SFTP.
I already went through some of the forums posts but they are date back to 2007, so just wanted to confirm if there is anything in recent releases of SOA Suite.
- FTP adapter support or
- OWSM suppport.
As far as i know, we have to install some PGP tool and write a script to encrypt/decrypt and call the script from BPEL. this conclusion is based on a stmt given in the OWSM 10g book by sitaraman.
Please provide your insights on this.
Thanks
Siva

Hi Siva,
I don't think still there is any support for PGP in Oracle SOA. You may use java for PGP encryption/decryption and transfer externally encoded messages over SFTP.
Please refer -
Re: PGP Encryption/Decryption
PGP Encryption in B2B
Regards,
Anuj

Java Embedding bug in SOA Suite 11g BPEL??

I am beginning to wonder if there is a 'bug' in the SOA Suite 11g, BPEL, Java Embedding activity? Need some help as soon as possible – does the Java Embedding activity work in SOA Suite 11g?
Have tried the following on Jdev 11.1.1.1 and Jdev 11.1.1.3 – get the same error message (see below for error message).
Thanks for any help - Casey
I created a simple composite app by:
1.     Created a Composite with BPEL Process
2.     Created a BPEL variable by the name of Variable and a Simple Type of string      ({http://www.w3.org/2001/XMLSchema}string)
3.     Added an Assign activity (Assign_1) and assigned the value of “Test Var” to the variable Variable using a Copy operation.
4.     Then, after the assign activity, added a Java Embedding activity (Java_Embedding_1) with Java Version set to 1.5 and the following code:
+try{+*
String var;*
var=(String)getVariableData(Variable);*
System.out.println(var);*
+} // end try+
+catch(Exception ex){+*
System.out.println(ex.getMessage());*
+}// end catch+
Compiled and got the following error message:
Error(23,34): Failed to compile bpel generated classes.*
failure to compile the generated BPEL classes for BPEL process "BPELProcess1" of composite "default/Project1!1.0"*
The class path setting is incorrect.*
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.*
Code for the BPEL component is:
+<?xml version = "1.0" encoding = "UTF-8" ?>+
+
+<process name="BPELProcess1"+
targetNamespace="http://xmlns.oracle.com/TestgetVariable_jws/Project1/BPELProcess1"
xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:client="http://xmlns.oracle.com/TestgetVariable_jws/Project1/BPELProcess1"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/TestgetVariable/Project1/FileW"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+
+<partnerLinks>+
+
+<partnerLink name="bpelprocess1_client" partnerLinkType="client:BPELProcess1" myRole="BPELProcess1Provider" partnerRole="BPELProcess1Requester"/>+
+</partnerLinks>+
+
+<variables>+
++
+<variable name="inputVariable" messageType="client:BPELProcess1RequestMessage"/>+
++
+<variable name="outputVariable" messageType="client:BPELProcess1ResponseMessage"/>+
+<variable name="Variable" type="xsd:string"/>+
+</variables>+
+
+<sequence name="main">+
++
+<receive name="receiveInput" partnerLink="bpelprocess1_client" portType="client:BPELProcess1" operation="process" variable="inputVariable" createInstance="yes"/>+
+
+<assign name="Assign_1">+
+<copy>+
+<from expression='"test var"'/>+
+<to variable="Variable"/>+
+</copy>+
+</assign>+
+<bpelx:exec name="Java_Embedding_1" version="1.5" language="java">+
+<![CDATA[/*Write your java code below e.g.+
+     System.out.println("Hello, World");+
+*/+
+try{+
+String var;+
+var=(String)getVariableData(Variable);+
+System.out.println(var);+
+} // end try+
+catch(Exception ex){+
System.out.println(ex.getMessage());
+}// end catch]]>+
+</bpelx:exec>+
+<invoke name="callbackClient" partnerLink="bpelprocess1_client" portType="client:BPELProcess1Callback" operation="processResponse" inputVariable="outputVariable"/>+
+</sequence>+
+</process>+

Java Embedding bug in SOA Suite 11g BPEL??

Performance tuning of BPEL processes in SOA Suite 11g

Hi,
We are working with a customer for performance tuning of SOA Suite 11g, one of the areas is to tune the BPEL processes. I am new to this and started out with stress testing Hello World process using SOAPUI tool. I would like help with the below topics -
1. How do I interpret the statistics collected during stress testing? Do we have any benchmark set that can indicate that the performance is ok.
2. Do we need to run stress tests for every BPEL process deployed?
2. Is there any performance tuning strategy documentation available? Or can anybody share his/her experiences to guide me?
Thanks in advance!
Sritama

1. How do I interpret the statistics collected during stress testing? Do we have any benchmark set that can indicate that the performance is ok.
You need
pay attention to:
java heap usage vs java heap capacity
java eden usage vs java eden capacity
JDBC pool initial connections vs JDBC pool capacity connections
if you are using linux: top
if you are using aix: topas
2. Do we need to run stress tests for every BPEL process deployed?
yes, you need test each BPEL. You can use "Jmeter" tool.
Download Jmeter from here: Apache JMeter - Apache JMeter&trade;
Other tools:
jstat
jstack
jps -v
Enterprise Manager
WebLogic Console
VisualVM
JRockit Mission Control
3. Is there any performance tuning strategy documentation available? Or can anybody share his/her experiences to guide me?
I recommend "Oracle SOA Suite 11g Performance Tuning Cookbook" http://www.amazon.com/Oracle-Suite-Performance-Tuning-Cookbook/dp/1849688842/ref=sr_1_1?ie=UTF8&qid=1378482031&sr=8-1&keywords=oracle+soa+suite+11g+performance+tuning+cookbook

Message Ordering or Singlton Service in SOA Suite 11g

In SOA Suite 10g, JMS Adapter could behaviors as Singleton instance by setting the properties "XclusterGroupId".
In addition, set Routing Service to be Synchronous execution, therefore only one instance consuming the Target message queue sequentially.
Does this properties still take effect in SOA Suite 11g, as I didn't find this properties being mentioned through Adapter Technology documentations?
Otherwise are there any other solutions for the Message Ordering?
Thank you in advance.
-Simon
Edited by: user8408910 on Jul 13, 2009 1:31 AM

Is it the same answer for JMS topic listeners? i.e. each new message on the topic should be processed once and only once by a Composite deployed to a cluster with >1 server instances.
Thanks for info,
Todd

Error while starting the AqAdapter in SOA Suite 11g Admin Console

facing an issue with the AqAdapter(Resource Adapter) in Soa Suite 11g Admin Console.
we go to Deployments --> Select Aq Adapter --> Currently it shows the status as Prepared
Now we try to Start it again --> it comes back with the error message mentioned below
weblogic.application.ModuleException: weblogic.connector.exception.RAException:
Jndi Name is null or empty. Errors were encountered while performing this operation.
source path on the admin server is mentioned here for this AqAdapter:
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/AqAdapter.rar
deployment plan :
/opt101/app/oracle/SOAD/SOA11gR1/fmw/Oracle_SOA1/soa/connectors/was/Plan. xml
We check in the Configuration tab --> Outbound Connection Pools -->
here it shows the Group as javax.resource.cci.ConnectionFactory and under it we have setup
2 connection pool instances with JNDI names as : eis/AQ/aqSample & eis/aq/B2BAQ
Could someone please help here as to what could be the reason why this error is coming and
how we could resolve this.
With Regards & thanks

This is what we have done :
1.Created the JDBC data source & connection pool as below :
data source name : B2BAQ , JNDI name : jdbc/B2BAQ
Connection Pool :
URL : taken from the tns entries of the instance
Driver Class Name : oracle.jdbc.OracleDriver
Tested this connection ..it works fine from the Admin Console
2.Then go to Deployments --> AqAdapter -> Configuration tab --> Outbound Connection Pool Group -->
Create a new connection pool instance -- General tab
connection interface factory : javax.resource.cci.ConnectionFactory
JNDI Name : eis/AQ/B2BAQ
Then in Properties tab : Enter the Data Source Name : jdbc/B2BAQ
Then we try to Start the AqAdapter from the Admin Console..it goes into Prepared status.
The error message which comes is mentioned above.
Is there any way we could resolve this ..that would be very helpful
Regards
Edited by: user5149250 on Mar 13, 2012 6:33 AM

Is there a replacement in Soa Suite 11g for RDBMS Events?

Similar Messages

Maybe you are looking for