Is there a report available:

Hi
Is there a report available:
selection on cost center group by cost element group that displays posted quantities as well or statistical key figures?
For the quantity the unit of measure should be selectable or for a statistical key figure I should be able to select one
thanks in advance
prasad

Hello
There are many standard reports under cost center, choose the appropriate one and try to change the layout and save it with a variant.
Under subsequent activities, a manager could change the out put layout of a cost center report.
Alternatively, you could create a simple query report with your desired fields. Check with ABAPer for some technical help.
Reg

Similar Messages

Reports Available in SAP

Hi All,
I have below two requirement , is there any report available in sap which fullfills my below requirement
1) Report for outstanding commitments
Is there any repoert available which shows outstanding commitments related to the purchase orders
2) Is there any report available which shows all the Goods reciept documents against which no invoice posted or partial invoice made
Thx,
jai

Hi All,
After some investigation i found below two transaction codes by which we can get outstanding commitments purchase orders
Internal Oders
S_ALR_87013018
S_ALR_87012999
S_ALR_87013000
Cost centres
S_ALR_87013620
this is an alternative solution
Let me know is there any direct report available
Still I am looking in to list of GR documents not have any invoices and made partial invoices
Thx
Jai
Edited by: M Jairaj on Oct 16, 2009 8:11 PM
Edited by: M Jairaj on Oct 16, 2009 8:38 PM
Edited by: M Jairaj on Oct 22, 2009 3:10 PM

Report available for test cases (manual test script files uploaded)?

We upload our test script files to the "Test Case" tab, assign it a status. We are hoping to have a report that would report all test case files and their STATUSES.
In solar_eval, there is a standard SAP report for test case provided. However, the field "Status" for the test case file is not included in this report.
Is there any report available that would give us this status? If not, in which table does this data come from? Is there anyway to build a simple SQVI query to extract the list of test cases and their statuses?
Any help is highly appreciated!

Hi Jo,
It's not entirely clear on whether you are look for 'Status' values of the Test Case document itself OR for 'Status' values of the Test(s) conducted on such Test Case documents.
I believe the following two SOLAR_EVAL reports should resolve either ways:
(a) SOLAR_EVAL -> Project -> Configuration -> Assignments -> Documentation (Programme called is SAPLSPROJECT_SOLAR_DOC_EVAL_IM) , Tick only 'Test Cases' and switch off other tabs
(b) SOLAR_EVAL -> Project -> Test -> Test Plan Status Analysis
Best regards,
Srini

UMX Roles - Is there a report which lists the roles created through UMX

Hi
Are there any reports available which will detail the roles created in User Management. We need a listing of the roles created by categories.
tia
Kumar

Hi,
If you are on 11i, there is no seeded report to list the roles -- Query the tables listed in "Oracle Application Object Library Release Notes, Release 12.1.1 [ID 566521.1]", under "3.8 Oracle User Management - SOX Compliance RBAC Reports" to get those details.
The (List of Users"/" List of Roles/Responsibilities"/"List of Functions/Permissions"/"List of Data Security Objects) is only available in 12.1.1 and above.
Thanks,
Hussein

Reports Available in SRM

Hi All,
SRM 5.0 ECS..
Is there any report available in SRM which shows all the Goods reciept documents against which no invoice posted or partial
invoice made
Thx,
jai

Hi..
I belive no such standard report available for GR and invoice. There are few reports available for shopping cart analysis.
hope below links are useful to you.
Standard reports in SRM
Reports in SRM
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/e0/411d2c04e349beacea9132fdad923b/frameset.htm
Regards
Kiran

Is there any standard Atrition Report Available

Hi Experts,
Is there any standard Atrition Report Available.
Regards,
IFF

Hi,
Std report has EE entry and left and Staff changes. If these helps for ur req use it else create a new report for attrition. Mostly std report will not covers the orgn attrition report..
http://help.sap.com/saphelp_47x200/helpdata/en/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm

Is there any seeded graphical report available in OPM quality module.

Dear All,
I have two queries in OPM quality module.
1.Is there any seeded graphical report available in OPM quality module?
2.Is there anything like Collection plans of collecting multiple elements and doing an analysis based on the Collected elements in OPM quality?
We need to map these two requirements for a OPM customer.
please send your comments.
Thanks
Suresh

Dear Aditya
To my knowledge, there is no such report and need to go for Customization. Hopefully what you asked is simple report which is possible to customize.
Regards
Raj

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Request for reporting available icon is missing !

Hi,
I have an infocube which has been uploaded by ODS and the data load was successful.
But--
The request for reporting available Icon is missing in the request.
Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
Why i am not seeing the icon?
Raj

Hi Raj,
If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
otherwise it should appear...
if you are talking abt ODS then you might have missed the step to activate data in ods.
hope this helps..
cheer's
HVR.

What are the standard bex analyzer reports available?

hi all
what are all the std reports available for fico? sd and mm?
thanxs in advance
regds
hari

Hi,
This is the best way...and the simplest way....since it is a big question....just go Business content tab in RSA1 and there go to "query elements" option and cick on the option "select objects" this will give you all the standata BW queris based on all the BC cubes and it will not show self developed queries in you system.
So fo MM reports go to...Infoarea "Supply Chain Management"-> "Inventory Management"....here you will see all the cubes related to MM and the reports nased on that.
for FICO go to Infoarea FMCO Financial management and controlling.........
Similarly you can find for SD.
If you want to find the detailed information about all the queries .....you will have to search the help.sap.com witth the same name of the cubes and you will get various links explaining that.
Thanks

Why is no report available when Adobe Flash crashes?

Firefox 6.0.1 (problem started with Firefox 5)
Flash: 10.3.183.7
OSX Lion
The flash plugin crashes frequently; however, Firefox always says "No report available". How can I get crash information generated so that this bug can get fixed? It crashes while generating the thumbnail for videos while loading a page and a visit to http://www.youtube.com is enough to crash the plugin.
The support pages for troubleshooting flash crashes just say to update flash, update firefox, and send in crash reports. All software is up to date and I can't get crash reports.
Flash works fine in Chrome & Safari on the same machine. I've tried uninstalling & reinstalling Flash. I've tried disabling all plugins. I've tried disabling flash hardware acceleration. My CUDA driver is up to date too. I've tried 32-bit mode and 64-bit mode.
How do I get a crash report?

I am also having this problem on my 32 bit Windows 7 machine except that it hangs rather than crashes, that is I can't get to any of the other tab or use the browser and there is not ability to report the failure. I would post a screen shot but if I go there I won't be able to come back and post this message :(

Is there any report to find report execution history

Hi All ,
Good morning I hope you are all doing great,
Can any body knows is there any Standard report available to find the out, In a month period what are the reports,how many times and what are the users have been executed.
Regards,
Murali.

Hi Murali,
Kindly post the details of the solution followed. Recently a member has raised the same query in this forum, but couldn't get the solution.
Regards,
Ravi

BW Report Availability

As much as we would like all BW based reports available on time, all of the time, the reality is that some reports are not available to our user community due to data load failures e.g. master data, issues that require bug fixes etc .. Our business need to know which reports are available with most recent data. They need to know this without having to run the query and look at the "status of data" information. This would be inefficient when we consider many users all repeating the same check.
We are looking to develop a custom solution that will provide a data load status for all web templates in our system. The logic is along the lines of :
1. Get a list of all web templates
2. Determine the embedded queries
3. Find the related InfoProviders / Data Targets
4. Find the last request status and last load times of these Data Targets (along with any data staging objects before the report layer)
5. Consult a mapping table * (some objects should be loaded weekly, daily, monthly etc ..)
6. Report a status e.g. Sales Report OK last loaded 15.02.2005 08:00, Manufacturing Report NOT OK last loaded 14.02.2005 22:00 ..
We would like to define a web template <> load frequency mapping table. This will be used to determine what constitutes the red / green traffic light status of each web template. So, imagine that web template A contains queries that are based on an InfoCube that should be loaded every 24h - we would maintain this in the mapping table. The program would check the mapping table in relation to web template A. If the InfoCube was loaded 23h ago a green light status would be reported. If last loaded 26h ago, or loaded with a failed request, a red light status would be reported.
I would like to hear from anyone who would share solutions to similar requirements.
Philip Botterill, Nestlé

Hi David
You can do that within process chains. There you can define if you want to send a email in case of errors or successful execution of a certain step (e.g. after rollup of the infocube). You have to configure SAPconnect (Trx. SCOT) in your BW installation. Look at the Online documentation http://help.sap.com/saphelp_bw30b/helpdata/de/cc/bae93a2876a81ae10000000a11402f/frameset.htm
Kind regards,
Hansjörg Luzi

Reports available in the Business Package for MSS and ESS

Hi,
I have searched sdn.sap.com throughout looking for a comprehensive list of reports available in the business packages for both MSS and ESS, i got a little bit of joy and found some of the MSS reports but not all on sdn.sap.com, can anyone please advise where i would find such information on both these packages, just to re-iterate, i am looking for a list of reports these business packages offer? any help much appreciated.
Thanks
John
P.s any documents can be sent to [email protected]

@John
(1) ESS- We built our own custom PORTAL role/workset in which one of the worksets we created is called "Tools and Forms". Under that workset, we placed various pages/iViews that either are simple URL iViews that link to external documents and such (like vacation request forms since they do not do online leave requests yet) as well as a couple ot t-code iViews that run reports in ECC for the employee. Nothing very mind blowing there. Just some content creation on the portal side.....oh, and some config on the backend to create a Homepage Framework Area Page and all for it (I liked that part!)
(2) Wow....talk about perfect timing...I just had to document the way MSS sees the MDT reports in it's "reporting" area yesterday! haha Here goes the quick explaination....in configuration for MDT, you have various "scenarios". These kinda determine which "groups" of reports will show in MDT. For MSS for the Reporting webdynpro/service, the scenario is RPT0 (in ECC 5.0, at least). Soooo if you look at the function CODES assigned to RPT0, you will see several for Training and one for Accounting (Cost Centers)...you can reference the function CODES listed back to the "pool"/library of function codes a bit up/previous in the same config area for MDT(I think it is called "Define Function Codes"). However, there is one more piece you will see listed under RPT0....it is a DIRECT call to function MODULE "HR_HIS_READ" (this was a bugger to find because I could not find the "Maternity" report listed in the function codes and had to figure out where the heck it was coming from! haha). Anyways....what the function MODULE actually does is call the HR Information System (HIS) passing it the RPT0/MSS scenario. This returns the particular reports for Employee Data and Time&Attendance. You can see this if you run the HR_HIS_READ function directly and enter RPT0 for the second input value (first and third are not needed or you can just enter "*". Sooooo that is how the "magic" happens. Hope that explained it. From there, you can simply config you own scenario/reports to add into MSS if you like.
Hope this helped!

ITunes - App Store - There are updates available that ain't available?

First of all, I'm starting to think that the iPhone ***** big time, but that's a whole other story...
So, here's my issue: Apparently there are updates to my applications available. So says iTunes and also the App Store app on the iPhone, both of them reporting the same number of apps available.
I'm quite sure that there was a button to "update all" on the iPhone on 2.0.1 and 2.0, but that seems to be missing? (but not the point anyway)
Then, in iTunes, the applications view tells me that there are updates available. When I click that link on the lower right that usually redirects to the update page, iTunes tells me that there are no updates available for my account?!
How can that be? Either there are or there ain't.
Is there a way to fix that problem? I would have updated the applications trough the iPhone, but as there are many (44) and I would have do update them one-by-one, I'd like to go an easier way...
I'm really patient, but I start to hate my iPhone. As it is now, it is just a ******* expensive piece of junk. :-((

I have fixed a similar issue in my iTunes. Here is my thoughts on why it happened and the fix.
I had recently added a second computer w/ iTunes with which my iPhone is now synching. I wanted to move my music library synching from work to home.
On the 1st PC (@ Work) I was synching:
Info, Contacts
Info, Calendar
Ringtones
Music
Podcasts
Video
Applications
On the 2nd PC (@ Home) I began synching:
Ringtones
Music
Video
Applications (this nicely caused all of my iPhone Applications to be copied to this PC, in case of a need for a restore from home)
After beginning synching on the 2nd PC (@ Home), I disabled synching on 1st PC of:
Ringtones
Music
Video
Applications (This apparently caused the issue)
The issue with phantom updates was showing up on the 1st PC (@ Work), but I was not synching Applications here. Apparently, I had updated some Applications from the 2nd PC (@ Home) and iTunes detected this and saw a need to show that my iTunes Applications needed updating. Something not in synch between iPhone - iTunes - App Store I believe.
The Fix:
On the 1st PC (@ Work) I enabled synching of Applications and then performed a synch. The phantom updates went away. I noted during the synch that my iPhone apparently updated some of the applications in my iTunes library.
I hope this helps or enlightens others having this difficulty.

Is there a report available:

Similar Messages

Maybe you are looking for