Is there a Report Painter mass generate?

We are in the process of upgrading to ECC 6.0 and all of our Z* Report Painters were not regenerated.  We can do them one at a time in trans code 'GRR3'.  I was wondering if there was a way to mass generate all Z* Report Painters at once?

GR5G can be used to mass generate report groups within a report library.

Similar Messages

  • Difference (doubled) in report painter.

    Hi,
    I am using report painter to generate reports. However, I found there is a row of data doubled as the orginal. E.g. the entered data is "20", it will show up as "40". From the advice gained from my superviour, he said it may be a problem about SAP report painter and may be able to find solution online. However, I can't reach the solution on the internet. Can anybody help me on this issue? or anybody have face this issue too? How can you solve this problem?
    Thanks!!!
    Regards,
    Mandy

    It is due to the selection of finacial statment item. It cannot directly select a G/L account, but have to select also the finacial item with '#'.

  • Report for mass interruption of partially confirmed orders in PPDS?

    Hi gurus,
    our client has a lot of partially confirmed orders in the past, and this is giving us problems with the optimizer.
    Is there a report for mass interruption of this orders?
    We can do it one by one in the DS planning board, but there are too many!
    would appreciate any help,
    Pablo

    Hi Pablo,
    I would suggest you can close the partially confirmed orders at R/3 itself
    so that it will update in APO via CIF.
    There is delivery complete indicator in R/3 production/process order which
    upon checking will close the order.
    Regards
    R. Senthil Mareeswaran.

  • Regarding report painter for PP module

    HI every one,
    Is it there any report painter for PP module.
    Report painter is available for FI module. Like that is it there any thing for PP module.
    Other than SQL Query. Plz suggest me because function people want to do that .
    full points will be awarded for correct answer
    Thanks and Regards,
    P.Naganjana Reddy

    plz urgent help me in thhis case.

  • No Program generated after creation of new report via Report Painter

    Hello,
    I have created a new report after copying an existing report from report painter GRR1. The new report has also been assigned to a new Report Group relevant to the same library.
    There is no Syntax error. The only change has been to the Title of the report.
    However when I am trying to execute the report nothing happens. ABAP found that no program has been generated by SAP for this mew rpeort. We confirmed this by searching with my user ID in table TRDIR.
    However there is no trace of it.
    We have tried to execute the report from GRR3 & GR53 (report group). The report & report group is having the same attributes as the old one.
    Unless the report is in executable stage we are not able to go to the Selection screen & finally from the Technical Information to the program name.
    Please could you let me know what can be the possible cause for this & how can we resolve the same.
    Thanks & Regards
    Shreenath

    @JoeSchmoe115:  Thanks for your suggestion.  Using a web service or WCF service would still mean dealing with potential timeouts for very large reports (granted you can adjust those timeouts).    
    I think an approach using a console app could work, but rather than having the web app spawn it, an alternative would be to do the following:  (1) have the web app insert report generation requests (including all necessary report parameters) into
    a database table, and (2) have a console app, periodically invoked by Windows Task Scheduler, which reads that database table and then uses the SSRS API as you describe to generate the report, save the byte stream to a file, and finally send
    the e-mail notification to the user.  
    mkedwards
    What you've described will work but saving report generation requests in separate table may not be necessary. I don't have much experience with web services but can they just spawn C# console app with needed parameters and exit without waiting for console
    app to complete?
    The positive side of using database to store report generation requests is that you would have complete log of all requests. Your console app can then update database with completion status.

  • Error in generating a report group in Report Painter

    Hi,
    I created a report in SAP report painter using transaction code GRR2. I attached the report to an existing group ( 15 reports already in the group), when I generate the group in transaction code GR55 thereu2019s an error message u201CSyntax error in GP40V42F6QG4OQVI4Q93F6FE3QK500, row 97,644 (-> long text)u201D. Please help me on this error.
    Thanks,
    Louie

    There's no error when I generate the same report in a new created  group as well as when I generate the existting report group without the new created report.
    Information on where terminated
        The termination occurred in the ABAP program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
         in "FILL_RANGES_FROM_SET".
        The main program was "GP40V42ERDE7HBU91TXFAHVA6B0500 ".
        The termination occurred in line 92457 of the source code of the (Include)
         program "GP40V42F6QG4OQVI4Q93F6FE3QK500"
        of the source code of program "GP40V42F6QG4OQVI4Q93F6FE3QK500" (when calling
         the editor 924570).
    Louie

  • Is there a way to mass export/save the reports from database to server

    Hi Everyone,
    Hope all is well,
    We use Discoverer to report off of an ODS. We are moving from ODS 3.1 to ODS 8.
    Is there a way to mass download the reports into ODS 8.
    My idea at this time, would be to individually save as the query to a folder on server.
    Then open another Discoverer instance, sign to ODS 8, open the query from server and do save as to database.
    This would take time ....
    Please advise with your thoughts and ideas, tx, sandra

    hi sandra,
    This question can be answered by Michael,he is expertise in sungard banner.
    By,
    Kranthi.

  • Assign Transaction Code for Report Painter generated program

    I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
    Can you please guide me on how to handle this problem

    http://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
    Found my answer in the above link

  • Cash flow direct method report is generating by using report painter

    Dear all
    i am preparing cash flow statement direct method report by using  standard t.code s_alr_87012271
    in this report i am maintain values by using T.code FSI5 in report painter form name 0SAPRATIO-04
    there i am maintain GL accounts codes which cells are not having formula
    for example second  row item Increase in down payments received it contain the formula Z004-z003
    and third row character Increase in receivbls frm gds & services it contain the formula z007-z006
    where can i maintain formula components and how to create and  link the GL Accounts.
    please guide me.
    Thanking you
    Kranthi

    Hi Victor,
            Cash Flow S_ALR_87012271 is the std cash flow where you have to assign gl. After excuting report. Click on form and assign gl to FORM :-  0SAPRATIO-04 Cash flow (direct).
       But it's std format so you will not get the report of cash flow which will show the total inflows and outflows in the bank account as per comapny scenario. For this   u have to take ABAP person help to create cash as per comapny requirement.
    Nikhil

  • How to transport generated reports through report painter

    Hi All,
    We are upgrading from 4.6 to ECC6. Previously somebody created reports for Finance  through report painter, now in the new system they are two to three system generated reports which are produced by report paintyer (I guess) are retrieveing wrong data.
    So I debugged the generated reports and found two locations
    1. generated report as syntax error
    2. at selection it is having an additional filter with company code for each table  like coss, cosp, cospp which I dont find that filter in the old 4.6 generated report, I modified the generated report but problem is that it dont give me any transport number.
    So these reports are client specific, can any one suggest me how to transport these changes to quality and production environment.
    I tried with transaction GCTR , but it is failing when it is released.
    Can any one suggest me.
    Thanks
    Tangudu

    No better manual than SAP help!
    Below is the link to Report Painter
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards
    Sreenivas

  • Can we change or edit the report generated by Report Painter?

    hi,
    can i add a field in select- option in the report which was generated by report painter?

    Hi Poonam,
    Yes you can change a Report Painter Report.
    Hope the below threads help you:
    https://forums.sdn.sap.com/click.jspa?searchID=14947520&messageID=5778256
    https://forums.sdn.sap.com/click.jspa?searchID=14947520&messageID=5726896
    Have A Good Day
    Chaitanya.

  • While doing changes in GRR2 no transport request is generated( report paint

    Hi Gurus,
            when i am changing the report painter (GRR2), no transport request is generated.Actually when i am changing the following........
                  Trial balance......... liabilities          from               to
                                                                 100000           199999 (allready existing)
                                                                  600000           690000 (new range while doing this,not generated transport request)
    please do needful,
    Regards,
    Rmesh.

    Hi,
    Changes in report painter do not generate change request. You can either create a transport automatically by going to GCTR transaction or you can simply export/import the changes by going to GR37/GR38 transactions.
    Regards,
    Eli

  • Mass Change of Sets for Report Painter/Writer Reports

    Hi,
    We have upgraded our system from 4.6c to ECC 6.0. We are using more
    than 40 Report Painter/Writer reports which in turn are using Sets.
    However, these sets are containing reference to a Table which we want
    to change for all the set enmasse. e.g. If currently the sets are using
    Table Reference "ABC", we want to change it to "XYZ" because the
    table "ABC" is not at all existing in our new system ECC 6.0.
    Even we are unable to change the sets through T.Code GS02 as the table
    itself is not existing. And as the table is not existing, the Reports
    are giving hard errors saying that the sets do not exist.
    Kindly request you to guide us in this regard.
    Thanks in advance,
    Shalin Shah

    Looks like you have to create new sets and assign them in the report replacing the old ones.

  • Report Painter - Report group doesnot exist

    Hello Expert
    I have done the development of new report and report groups through report painter. I did the assignment of report to report group, Also i could able to access the report through T.Code GR53 / GR55 codes.
    I have done the Generate report option (Shift +F8) option through T.Code GR52 -> got the message that " Report group ZXXX has been generated". Also did the " Mass generator " and no error are found.
    I could able to assign the T.Code through SE93 in my development client. I did the trasnport the development to Unit Testing Server.
    In Testing Server, if i try to use the T.Code ... i am getting the message as " Report Group does not exist with message number - GR409. Even thou, i am able to access the report and report group directly through GR53 / GR55.
    Kindly guide me, is there any step i have missed ?
    Regards
    Anil Kumar

    Hello Eli
    Thanks for your reply,
    I did the Mass Generator option in "TEST System" also.
    I am not getting any error message & all are in "green color"
    Still i am getting the same message " Report Group Does n't Exist"
    Kindly guide to me over come the issue
    Regards
    Anil Kumar

  • REPORT WRITER AND REPORT PAINTER

    Hi Techis,
    Will anybody pls tell me the details workin of reort painter and report writer along with Tr code and also will u pls give me the steps to execute such type of report.
    Rewards will be given for each reply.
    Regards
    Santosh L.

    hi santosh,
    Where Is Report Painter/Report Writer Used?
    Initially, both tools were only available to the FI/CO modules. Later, with the introduction of the Logistics Information System and Flexible Analyses in Release 3.x, the functionality of these tools was further expanded. It still is not widely known that the Report Painter/Writer can be used for reporting against structures other than those delivered in FI and CO (see TechTalk on page 8-4).
    A common misconception in the user community is that Report Painter/Report Writer can only be used to report against a single table. However, some reporting structures do report against multiple tables. For example, CCSS (for Cost Center Accounting) refers to tables COSP, COSS and more, depending on the key figure configuration. Similarly, FI-SL (Special Purpose Ledger) reporting structures include summary and line-item tables (the key figure set determines where the data comes from).
    To configure other table joins, views may be created joining the necessary tables, and views can be added to the control tables, via Flexible Analyses in LIS. Report Painter/Report Writer can be used in almost any application area in R/3 to report on currencies and quantities.
    Data tables supported
    Both Report Painter and Report Writer can be used to report on the following tables and tables types:
    < Evaluation structures set up in the Logistics Information System (LIS). These structures normally begin with an “S” or “ZF.” Several different tables and views within the R/3 System can be added as evaluation structures.
    Note: You cannot add cluster tables, such as BSEG.
    < CCSS is used for Cost Center Accounting (CO-CCA), Internal Orders (CO-OPA), Activity Based Costing (CO-ABC) and for cost element reports in Project Systems (PS).
    < GLFUNCT is used for functional area reporting in cost-of-sales accounting.
    < GLPCT and GLPCOP are used for Profit Center Accounting (CO-PCA/EC-PCA).
    < FILC is used for Legal Consolidations (FI-LC).
    < COFIT is used for the Controlling Reconciliation Ledger (CO-CEL).
    < ZZ tables are created for the Special Purpose Ledger (FI-SL).
    < FIMC is used for consolidations in the Enterprise Controlling module (EC-LC).
    < GLT0 is used for Financial Accounting (General Ledger) reports by account, company, and business area (FI-GL).
    < KKBC, KKBE, and KKBU are used for the Controlling Product Costing module (CO-Costing).
    < New in Release 4.0A: RWCOOM is used for CO-CCA, CO-OPA, and CO-ABC. RWCOOM is used for special standard reports like internal order budget reports, cost center budget reports and cost component reports.
    Note: RPPS was used for Project Systems (PS). However, it is obsolete and will no longer be supported in Release 4.0. In Release 3.x there were only two special reports (6P70 and 6P71) using RPPS. These reports cannot be called directly, but via ABAP reports RKOPLAN0 and RKOPLAN1.
    How to Access Report Painter/Report Writer?
    To access the Report Painter you may use either of the following two methods:
    < Transaction FGRP
    < From the SAP main menu, choose Information systems ® Ad hoc reports® Report painter.
    Report Writer functions can be accessed from within the Report Painter. To access Report Writer, choose the following menu path from the SAP main menu:
    Information systems ® Ad hoc reports® Report painter® Report Writer.
    How Is Report Painter/Report Writer Organized?
    Report Painter/Report Writer has four main components:
    < Sets: Sets are logical groupings of characteristic values. For example, a cash line on a balance sheet is made up of a set of cash accounts or an energy product line on an inventory report is made up of a set of energy products. Variables can also be created which are placeholders for sets, or values within sets.
    < Libraries: Libraries control which characteristics and key figures from a table are available for reporting.
    < Reports: Reports hold a definition of the rows, columns, and overall data selection. They also include the header and footer texts and layout settings.
    < Report Groups: Report groups can contain one or more reports. The report group is what you execute—not the actual report. A report group is generated to create a set of ABAP programs that produce the reports.
    How Does Report Painter Differ from Other Reporting Tools?
    < With the exception of row titles which have text fields, Report Painter/Report Writer reports display numerical fields only (for example, dollar and quantity fields). This is not a requirement for ABAP Query and typical line item reporting tools, which can display arbitrary text columns.
    < While printed Report Painter/Report Writer reports appear much the same way on paper as they do on screen, the Drilldown reporting tool produces a different output format. Drilldown reporting is an online analytical tool which can be used to drill down to different levels of detail, but it is infrequently used for printing.
    < Report Painter/Report Writer reports are hierarchical and take advantage of configured hierarchies (for example, with cost center hierarchies). You can also execute Report Painter/Report Writer reports from each level within a hierarchy.
    < Report Painter/Report Writer reports can handle multiple currency/quantity units within a single column.
    < Report Painter/Report Writer is well suited to handle reports that require mass production. For example, Report Painter/Report Writer is a particularly effective tool for creating month-end reports.
    refer this link
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    http://abaplearner.blogspot.com/2007/12/more-abap-tutorials.html
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    regards,
    sravanthi

Maybe you are looking for