Is there a REQ line on DAQCard DIO-24 for handshaked output?

Trying to use DAQCard DIO-24 for handshaked output using LabView 6.1 on Mac. I was looking at the signal diagrams and didn't see any line in Port C (the control port) that was specifically labeled as a REQ signal.

I figured it out. For those who might have a similar question:
1. If you're doing digital input, wire up your 'trigger' signal to the strobe pin for the appropriate port.
2. If you're doing digital output, wire up your 'trigger' signal to the ACK pin for the appropriate port.
Regards,
Jejo Koola

Similar Messages

  • A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

    A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
    Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
    But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
    I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
    How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
    Thank you in advance,
    SiHero

    If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
    If Verizon return it to Apple it wil not be handled by Apple
    If Verizon also use unauthorised repairers you may be lucky
    (Apple do not sell parts to local guys or anyone else )

  • Is there a command line option for VNC to automatically launch in fullscreen mode?

    I can launch a VNC window from the command line, as such:
    open vnc://username:password@hostname
    ... but I'd like it to automatically start in full screen mode. Is there a command line option for this?
    I'm using an old MacMini purely to connect to another Mac over screen sharing, but when the MacMini boots I'd like it to go straight into the fullscreen of the other desktop.
    Many thanks!

    Set the Integer pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
    * http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
    That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
    See:
    * http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
    * http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes

  • There is no line in audio on the new Macbook Pro ?

    Hi,
    I just got my new Macbook pro (Retina with 16gb). I'm surprised because i don't see the option for adjust in/out audio ? There is no line audio in on the new macbook pro ?
    Thanks

    To the best of my understanding from reading many posts on here, the best answers I can come up with to your questions are as follows:
    Verizon is supposed to be upgrading its signal format for several of its HD channels that will prevent your old box from decoding them. This is why they are upgrading you to a new box. As for the 7100-P2, Verizon was attempting to make a smaller, more sleek-looking and energy efficient STB. While I could be wrong about this next statement, I believe that this model could also be set either flat or on-end (like a book). If you set this box on-end then the clock display would have been very hard to read. There is no software update that can fix this issue because there is no LCD display on the front of the box to display the numbers. And yes, there are complaints all over these forums regarding the lack of clock display on this model. It would have served Verizon well to have consulted with its customers before making this change.
    There are 2 other models of HD STB that can receive the new signal and have a front-panel clock display. But unless you have a Verizon FiOS store nearby that would be willing to let you swap for one of those, requesting another exchange for your functional 7100-P2 may or may not be free. And you could just end up with another 7100-P2.
    Hope this helps.
    Find this post helpful, informative or just something you agree with? Click the red ‘thumbs-up’ button.
    Did this post solve your problem? Click the green ‘Accept as Solution’ button.

  • I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support?

    I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
    Thanks

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • When laptop wakes up there are horzontal lines then they go away. New issue.

    When my 2011 MacbookPro turns on or wakes up there are horizontal lines for a few seconds and then it goes away. Anyone know why or how to solve? Thanks in advance!

    Please make a Genius Appointment and take it in for service.

  • HT4641 after modifying a document in Pages I found that there are horizontal lines across every line break when opened and saved it in DropBox.  Does anyone know why?

    after modifying a document in Pages ON MY IPAD AIR I found that there are horizontal lines across every line break when opened and saved it in DropBox.  Does anyone know why?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • Is there any way to find out what a specific line of data usage was for?

    There is a line on my bill for 97 MB of usage while I was bowling?  I was not using my phone.  How can I find out what it was doing for that specific charge?

    Just like you said earlier
    3.  Re: Is there any way to find out what brush is applied to a path?
           imagecollection     Apr 7, 2015 6:01 PM  (in response to Silly-V)   
    The skill of scripting in Illustrator is to (due to necessity) find the most difficult way to achieve the simplest of tasks...
    so to retort I say this;
    “I suppose it is tempting, if the only tool you have is a hammer, to treat everything as if it were a nail.”
      ― Abraham Maslow, Toward a Psychology of Being

  • Black screen and if sleep button pressed there's green lines like the matrix!

    what do i do? my ipad was just working when i was getting ready for work and at work earlier today and i got home to check emails my screen wouldnt work! its a black screen and if the power/sleep button on top or even the home button is pressed then there are green lines that look like the matrix show up for a split second. then it turns back to black. Itunes is reconizes it and it still makes sound when i get an email but nothing else! please help!!

    what do i do? my ipad was just working when i was getting ready for work and at work earlier today and i got home to check emails my screen wouldnt work! its a black screen and if the power/sleep button on top or even the home button is pressed then there are green lines that look like the matrix show up for a split second. then it turns back to black. Itunes is reconizes it and it still makes sound when i get an email but nothing else! please help!!

  • When I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

    when I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

    Hi Vickey, S,
    Sorry for the delay in response. Is it happening with all the files?
    Also, please write the steps you are taking to type in the document.
    You might try uninstalling and re installing the Reader in case it is happening with all the files.
    URL to install the Adobe Reader is Adobe - Adobe Reader download - All versions
    Thanks,
    Vikrantt Singh

  • Is there a command line program that converts WAV to SWF?

    Is there a command line program that converts WAV to SWF?
    thanks

    why you want to do that? you can import your wav into the
    swf!

  • My iPhone was overstressed and there are these lines covering the screen making it difficult to access apps

    My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
    how do I make these lines leave so the phone can function as it should

    J-dag97 wrote:
    My iphone 4 was overstressed after it's housing was changed and there are these lines on the screen
    how do I make these lines leave so the phone can function as it should
    Take it back to whomever changed the housing.

  • I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  Help!

    I create a project w/iMovie and I have two problems:  When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen.  I'm uising photos in my project, not video.  Help!

    You can split a project in two by doing this.
    1) Go to the Project Library View.
    2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
    3) Do this again. This time name it "your project name - part 2"
    4) Open Part 1 for editing. Delete everything in the second half.
    5) Open Part 1 for editing. Delete everything in the first half of the project.
    At the end you should have your original project, plus the same project in two parts.

  • Is there a command line interface manual?

    Is there a command line interface manual?

    Is there a command line interface manual for applications such as iTunes?

  • Is there any guide lines how you can secure windows 7 gpo enable system services startup security settings?

    Is there any guide lines how you can secure windows 7 gpo enable system services startup security settings?
    For example like many do with Forefront Client Security Anti-Malware service, and there is lots of other service that you would like to have control over to get an secure and stable Windows 7.
    /SaiTech

    Hi, 
    Since there is no response from you, we considered that you have gotten what you want in previous post. 
    For further question, please don't hesitate to come back here and let's discuss again. 
    If you have any feedback on our support, please click here
    Kate Li
    TechNet Community Support

Maybe you are looking for

  • BDS_GOS_CONNECTIONS_GET list of attachment

    Hi I want to get information from FD03 all the attachmed list based on customer no . could anyone help me to correct this program to get the list of attachments list please. REPORT BDS_GOS_CONNECTION. DATA : logical_system LIKE BAPIBDS01-log_system.

  • DateField not getting copy in the matrix using Datasource & Datatable

    Hello All, I have tried to copy data From Purchase Order Tables to my own created User Defined Form matrix columns using DBDatasource & Datatables ,Instead of Document Date all other data are getting copied but that document date field is not getting

  • Business catalyst form not working right on an iPad

    I created a form on my client's business catalyst website. It doesn't clear on the iPAD after hitting the submit button. If he goes back on the browser-all the information is still there. BC tech support suggested that there was some code that needed

  • Pass Parameter into ADF Creation Form

    I have an ADF Read Only Form on page 1, and and ADF Creation Form on page 2. I want three specific fields from page one to be passed into the appropriate fields on page 2. How would I go about accomplishing this? Thanks, Tim

  • Can anybody explain the difference REDOLG vs ARCHIVE log files

    can anybody explain the difference REDOLG vs ARCHIVE log files? and the relation between redolog files and redolog buffers? thanx in advance