Is there a ring flash that fits around the Raynox 'snap-on' style Macro lens?

I have a Canon G11 and use the Raynox Macro lens (MSN 202) for photographing snowflakes.
Is there a ring flash that is made to specifically fit the Raynox lens or is it a case of buying one with a large enough internal diameter (something like the Polaroid Macro LED Ring Flash for Canon, model PLMRFC) to go around the Raynox and then coming up with a way to secure it in place?

I bought the Vivitar  LED Macro Ring Flash DR-7000 which has threaded adapter rings 49, 52, 55, 58, 62, 67, 72 and 77mm.
I bought it  for and old G5 and an S5 is. It also came with 4 diffuser rings. So far I am impressed and I cannot afford the Canon Ring flashes.

Similar Messages

  • THE PLAETIC PART THAT FIT AROUND THE AUDIO OUTPUT JACK IS MISSING,CAUSES AUDIO TO DROUPDROP OUT

    1. HP Pro Book 4525s
    2. Windows 7 64bit
    3. n/a
    4. na

    I was searching on Apple Discussions and many other users have noticed this problem. The web link is: http://discussions.apple.com/thread.jspa?messageID=2231106
    Other users have noticed that ALL MacBooks have this problem- no matter what week made- thus HOPEFULLY this will get fixed soon in an update- otherwise Apple will have to replace the audio hardware on every MacBook shipped!
    However- due to the fact that all MacBooks/Pros have this problem it is most probably a driver/ software issue. (knock on wood)

  • My sister gave me her 1st gen iPad to see if I could solve an issue.  It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?

    My sister gave me her 1st gen iPad to see if I could solve an issue.  It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe! Now see if it charges normally and after a period try to turn it on again. If the batter has been drained it could take 20 minutes or so for it to show that it is charging.
    Also considering if the battery need replacing!

  • Is there a C version that does what the MAX 1-D Interactive does?

    Is there a C version that does what the MAX 1-D Interactive does?  Or a solution to the problem below.
    I got the MAX 1-D Interactive to work with my stepper motor.  The hardware setup is at the bottom.
    I am trying to write a C program in Visual Studio 2010 to control a stepper motor. I found an example program called 1D Straight Line Move.c in
    C:\Program Files\National Instruments\NI-Motion\Documentation\Examples\NI-Motion Help\C
    I copied the example file and the needed .h, .c and .lib files into a Visual Studio project.  I changed the velocity, acceleration, and deceleration to match the values in the MAX 1-D Interactive.  The solution builds, but when I run it I get the following error message
    Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call.  This is usually a result of calling a function declared with one calling convention with a function pointer declared with a different calling convention.
    Setup:
    I am running the latest NI Motion Software.
    PXI-7334 connected to UMI-7774 using I/O Motion cable
    UMI-7774 connected to P70360 Stepper Driver using control cable
    P70360 Stepper Driver connected to NEMA 23 (T21NRLC) using Orange (A-), Black (A), Yellow (B-), Red (B)
    NEMA 23 is powered by 120V AC power supply
    P70360 Stepper Driver is set using DIP Switches (I tried to use the P7000 software tool that came with it, but it never found the driver):
    S1: 1
    S2-1: Off
    S2-2: On
    S2-3: On
    S2-4: On
    S2-5: Off
    S2-6: Off
    S2-7: Off
    S2-8: Off
    S2-9: Off
    S2-10: On
    S2-11: On
    S2-9: Off
    Attachments:
    1D Straight Line Move.c ‏5 KB

    No I am not using Visual C++ MFC.  I am using an empty C++ project in Microsoft Visual Studio 2010. Although I eventually want to create a .exe file from this project so I'll have change project type.
    The motor runs using MAX to control it. 
    It did run using the 1D Straight Line Move.c project, but it gave me the below errors.  That night I unplugged it because the stepper motor gets hot.  The next day MAX still moves the motor but the 1D Straight Line Move.c project doesn’t and I still get the errors below.
    I am getting two errors:  (I was getting the same errors yesterday)
    Run-Time Check Failure #2 - Stack around the variable 'errorCode' was corrupted.
    Run-Time Check Failure #0 - The value of ESP was not properly saved across a function call. This is usually a result of calling a function declared with one calling convention with a function pointer declared with a different calling convention.
    I think the errors come from using the functions in flexmotn.h.  The functions look like they are being used correctly, but I can't find where they are defined.  They are probably defined in FlexMS32.lib.
    I attached the files I am using.
    I haven’t tried any of the other examples.  1D Straight Line Move.c looks like the simplest and closest to what I want to do.
    Attachments:
    Files.zip ‏82 KB

  • Have placed video-when previewed there are sometimes heavy black lines around the image. If I place white rectangles in front, the black is hidden in Author, but when I preview the black lines are still there..How to use white rectangles to mask edges?

    I have placed video - when previewed there are sometimes heavy black lines around the image.
    If I place white rectangles in front, the black is hidden in Author, but when I preview the black lines are still there..
    How to use white rectangles to mask edges?

    Here's view in IBA you can see bounding boxes of white rectangles that
    form frame to block out black setions..
    Here's iBook preview image of same page, NO WHITE FRAME!
    WHY?
    BOB SPRAGUE

  • There is a tiny gap all around the side of my ipod between front aluminium panel and stainless back. Is it normal?

    I just bought an Ipod classic and noticed that there is a tiny gap all around the side of ipod between front aluminium panel and stainless back.
    Is it normal?
    I am just concerned because when I was given the box at the Futureshop, the box had a big dent on the side.
    (as if the box was dropped from 2-3 feet high atleast)
    I was wondering the dent would've done something to make that gap on my ipod.
    I am thinking to return it if it is defective
    Any advice?
    Thank you

    Return it, there should be no gap, for creeepy crawlies to go in and make nest and poop on your iPod circuit.

  • Wll there be a flash player download for the ipad 2 at any point?

    Wll there be a flash player download for the ipad 2 at any point

    While no one can say with absolute certainty, at this time it appears to be highly unlikely that a version of Flash Player will ever appear for iOS. Adobe has said that they've given up work on a version for iOS, so unless they change their minds at some point, and can come up with a version that would meet Apple's criteria for performance, security and stability, then Kappy is correct that no, it won't happen.
    Regards.

  • In the previous version, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

    in the previous version  of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

    Hi silvano,
    If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
    Start in Cell B2
    1 Tab 2 Tab 3 Enter
    4 Tab 5 Tab 6 Enter
    7 Tab 8 Tab 9 Enter
    Now you are ready to type into B5 .
    Another way that some people find easier is to enter one column at a time
    Start at B2
    1 enter
    4 enter
    7 enter
    etc.
    Now start with C2.
    Use whatever suits your work flow.
    Regards,
    Ian.

  • PS CS5 Extended on Windows -  When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  W

    PS CS5 Extended on Windows
    When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  This just started tonight.  What's causing this weird behaviour?

    What are the settings in Window > Clone Source?

  • Is there a note app that syncs with the native iphone notes app

    Looking for a feature rich app to pull notes from the native iPhone app.   I Like holding down the home button to tell Siri to take a note but want to do more with the note after she has taken it.  Is there a note app that pulls from the basic iPhone notes app?

    You Both can Add one email Account on Both Phones and then sync the Calender With Email - This way when one will add a reminder or event it will automatically synced to the other
    Regards Eree - Follow me on Twitter - Facebook - Google+
    For More visit My Blog

  • Please Help! Cases that fit on the 2G still fit on the new touch??

    Sorry this isn't a using iPod touch question but i couldn't find another forum so please help! Do the cases that fit on the iPod touch 2nd generation fit on the new 3rd generation? Because I am considering buying a case for my iPod touch 3G that i just ordered. So please HELP! Thank-u!

    All the physical dimensions are identical to the 2nd generation.

  • My iphone fell into the toilet so i am trying to use my imessage app on my mac to text my friends and it is saying my password is invalid. Is there anyway to fix that or reset the password for it? Thanks

    my iphone fell into the toilet so i am trying to use my imessage app on my mac to text my friends and it is saying my password is invalid.
    Is there anyway to fix that or reset the password for it? Thanks

    Hello jthompsonn25,
    I'm sorry to hear about your iPhone and the issues you are having with Messages on your Mac. If you are trying to send iMessage messages in Messages, your iMessage account should be tied to your Apple ID (same account name and password). If you are having password issues in Messages, you may want to verify that you have the correct password by logging in to your Apple ID directly:
    Apple - My Apple ID
    If you are unable to or are still getting an error message with your password, you may need to reset the password on your Apple ID. If that is the case, you may find the following article helpful:
    If you forgot your Apple ID password - Apple Support
    Sincerely,
    - Brenden

  • HT3842 Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

    Those steps don't work. I'm using the lastest version of itunes (11.0.1.12) on Windows. This article was last updated in 2009 and lists itunes 7.7. Anyone have any ideas, or is there a new article that accounts for the changes to itunes?

    Try This
    http://support.apple.com/kb/PH12359

  • Is there a DTP programme that comes with the standard Macbook Pro or would I have to buy Pages etc?

    Is there a DTP application that comes with the standard Macbook Pro or would I have to buy Pages or a similar app? Thanks.

    http://store.apple.com/us/browse/home/shop_mac/family/macbook_pro?mco=MTM3NjU5Mz U

  • HT4623 hi i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    hi
    i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?

    I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.

Maybe you are looking for