Is there a risk of setting a console connection timeout and what is the recommended setting?

Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

Hi Henrik
depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
it realy depends how secure is your space and how much security you need.
and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
HTH
Patrick

Similar Messages

  • What is the recommended set up for Final Cut Pro re: Scratch Disks etc

    What is the recommended set up for Final Cut Pro with regards to Scratch Disk etc.
    I have a lot of projects and at the moment they are all over the place on various external HDDs etc.
    I just bought a new Firewire 800 External HDD and want to get everything straight but I'm not quite sure where to start...
    Any advice would be appreciated.
    Thank You

    Media Manager (available from the File menu bar item) will consolidate all elements of your project together with a linked copy of the project file to a single folder in a location of your choice. There are various options to leave out unused footage, include handles etc. Safest way is to copy the files. Delete the originals when you are sure the copy works.
    The user manual has a detailed description of how MM works.

  • What's the recommended setting for "Process memory usage" ("process virtual" in UI) for a 64-bit host on a 64-bit OS?

    Hi gurus
    In resource based throttling, what's the recommended setting for "Process memory usage" ("process virtual" in the resource based throttling tab of the UI) for a 64-bit host
    on a 64-bit Windows OS?
    According to MS (http://msdn.microsoft.com/en-us/library/ee308808(v=bts.10).aspx):
    "By default, the
    Process memory usage throttling threshold is set to 25. If this value is exceeded and the BizTalk process memory usage is more than 300 MB, a throttling condition may occur. On a 32-bit
    server, you can increase the Process memory usage value to 50. On a 64-bit server, you can increase this value to 100. This allows for more memory consumption by the BizTalk process before throttling
    occurs."
    Does this mean that 100 is the recommended setting for a 64-bit host on a 64-bit Windows?
    Thanks
    Michael Brandt Lassen

    Hi Michael,
    Recommended setting is the default setting which is 25 .dot.
    If your situation is abnormal and you see message delivery throttling state to “4” when the following performance counters are high or if you expect any of you integration
    process could have impact on following counters, then you can consider the suggestion by Microsoft. Don’t change the default setting.
    High process memory
    Process memory usage (MB)
    Process memory usage threshold (MB)
    You can see these counters under “BizTalk:MessageAgent”
    You can gauge these performance counter and its maximum values if have done any regression/performance testing in your test servers. If you have seen these counters having
    high values and causing throttling, then you can update the Process memory usage.
    Or unexpectedly you’re process high throughput messages in production which is causing these counters to go high and cause throttling, then up can update the Process memory
    usage.
    The above two cases where I know my expected process usage (by doing performance testing) or suddenly my production server processing has gone high due to unexpected business
    hike (or any reasons) which caused throttling, then do changes to default throttling setting.
    Just changing the default setting without actual reason could have adverse effect where you end up allocating 
    more processing capacities but the actual message processing message usage ever is low means you end up investing in underutilised resources.
    Regards,
    M.R.Ashwin Prabhu
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Whats the switch on the 7990 for and what should it be set to ( default )

    Hi
    Just a quick one, what is the switch for on the 7990 ? and what is the default setting? also are there any other fans that can be fitted to this card that are a bit quieter?
    Cheers karl

    This is no Lightning card but a reference AMD design card. Bios 1 (default position switch pointing to backplate) is unprotected can be overclocked and modded. Bios 2 (switching towards inside) is a protected non-overclocked backup bios. It is just meant to save the card when bios 1 is corrupted.
    There are no replacement silent fans. You'd need to switch to a custom aftermarket cooler but as far as I know there is none except for water cooling solutions.

  • What is the factory setting pin code for my ipod touch?

    im looking to make a purchase in app on my ipod touch and i need to switch off the restrictions under general settings. in order to this i need the pin code which is 4 digits. this must be factory set as ive not set it previously.
    thanks

    A: what is the factory setting pin code for my ipod touch?

    There is no default setting. You have to set the passcodes. If you cannot remember them, then see:
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
    Verify that you are using the latest version of iTunes before attempting to update.
    Connect your device to your computer.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
    Select the Summary tab.
    Select the Restore option.
    When prompted to back up your settings before restoring, select the Back Up option (see in the image below). If you have just backed up the device, it is not necessary to create another.
    Select the Restore option when iTunes prompts you (as long as you've backed up, you should not have to worry about restoring your iOS device).
    When the restore process has completed, the device restarts and displays the Apple logo while starting up:
    After... [Show more]

    Read other 6 answers

  • On my mini ipad, I cleared the cookies/histories in the safari setting.  But what does the advance-setting of the clearing the website data does?  What's that used for? Thank you!

    On my mini ipad, when I'm on the internet -- a few times I will see a blue small pop-up boxes telling me to allow down/load or add something like the bubble-splash game or something similar.  I jusr click ignore and it goes away.. I'm not sure why it's showing up lately.. I'm not sure if it's a virus or hacked in or a web brower matter..
    Should I go to the cookies/histories in the safari setting and have it cleared out?  Will that help resolve that?? 
    And what does the advance-setting of the clearing the website data does?  Sorry, I'm not familiar.. what's is that used for? Should I use that feature as well?? Thank you!

    This indicates corrupt files.
    A restore should resolve.

  • Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

    While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

    I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
    At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

  • ThreadOpt values - is it possible to set them and what are the ranges?

    Hi there,
    I have a problem on my TestStand 4.2 platform, with test step result, formed and received from called external sequences results. In my Main sequence, in Post-Expression I defined condition, according to which the "Step.Result.Status" is passed or failed, and it works. But the problem is that in Status Expression field there is following statement: "(Step.Result.Status == "Done" && (Step.TS.SData.ThreadOpt == 0 || Step.TS.SData.ThreadOpt == 3)) ? "Passed" : Step.Result.Status". After deep search in the user manual, I found that (Note from "Expression Tab - Step Properties Dialog Box"): "Certain types of steps, such as Numeric Limit Tests, Multiple Numeric Limit Tests, String Value Tests, Pass/Fail Tests, and Statement steps, reserve one or more of these expressions to perform operations specific to the type of step or a substep performs the operation. In these cases, you cannot use the expressions the step type reserves, which appear dimmed on the tab." 
    Now, my problem is that at this specific step I call to an external sequence, which returns results and it is correct, but if these results, compared to expected are not the same, my step in the main sequence fails. Which is OK. But when the final report is generated I see there "Number of Tests Failed: 0", which is not OK. Since I can't change the "Step.Result.Status == Done", which comes from the external sequence, I thought that may be there is a place to change the "Step.TS.SData.ThreadOpt" and this way to cause to main sequence to correctly report "Failed Tests <> 0"??? 
    Does anyone has an idea whether it is possible to set this the ThreadOpt value and what is the accepted range?
    Your feedbacks and inputs are highly appreciated.
    Stephan

    GSinMN wrote:
    Hello Doug,
      I didn't think I was modifying any hidden properties.  It's just configuring a sequence call step when you add it to the sequence.  The "Execution Options" are clearly shown in a dropdown menu on the Module tab.  I was just pointing out that this seems to be what sets the ThreadOpt variable.  
    GSinMN
    Maybe I misunderstood. When you said "My normal process is to set it to 1, but based on this info, it needs to be either set to None or Use Remote Computer if you want anything other than "Done" to be returned." I thought you meant that you were setting the property directly rather than setting your sequence call steps to "New Thread" with the combobox.
    -Doug

  • What Is The Best Setting To Use To Import Music?Please Help.

    Hi, All
    I have got an 80GB Apple Video iPod And I am still trying to figure out how to work it as I am new to using iPods.
    What is the best setting to use to import CD Music and Music from the Internet to iTunes?? as I would like to listen to the highest quality there is on iTunes and my 80GB Apple Video iPod.
    The settings are: ACC Encoder, AIFF Encoder, Apple Lossless Encoder, MP3 Encoder, WAV Encoder. If you have not got them to hand.
    Many Thanks For Reading This And Replying To It, Much Appreciated!!
    I Hope You All Have a VERY Merry New Year!!
    Kind Regards, Rocky Robin

    There really is no BEST setting. The "best" setting is the one that sounds the best to you.
    Having said that, you also asked what setting provides the highest quality audio. In that case, you need to use a lossless format, such as AIFF, WAV, or Apple Lossless. MP3 and AAC are both compressed formats, and will not provide as good of an audio quality as a lossless format.
    My personal preference would be Apple Lossless, but any of the lossless formats will produce an almost identical quality to the CD track.
    Keep in mind, the files will be quite large.

  • What is the best set up for video editing?

    What is the best computer? The best software? The best external storage? The best ram? 3D editing? Everything!!!!!!
    Running full HD and 720p at 60 fps videos. Clips ranging from a few seconds to 10-30 minutes.
    Cost isn't an issue.
    What is the best set up, not the most excessive. If it doesn't need to be there or it isn't greatly needed I would like to know. This is looking at the production aspects, not the camera and such. What is the best plug in for slow motion? Pros and Cons of the set up?
    I would greatly appriciate everyones input in this. Thank you so much.

    That is a hard question to answer.. Nothing is best for everyone... However if i am to generalize it I would put it this way.. If you want to cut everything from a short promos to hollywood pictures..
    A high end windows pc (only cause mac pro hasn't been updated in ages)
    Avid Media Composer with Nitrus DX
    Two monitors
    Broadcast monitor
    HD Deck
    pimping 5.1 speakers
    A good mixer
    You are looking at over 70,000 or 80,000, could even approach even more.. HD decks run atleast 15k.
    If price is not an issue then there you go....
    However this is not realistic for most people nor best solution by no means... I run a macbook pro with Avid (as primary) Final Cut 7, Final Cut X (for practice, didn't have to use it for a job yet), and Premiere (just in case)
    I am a final cut child who grew up on it and love it however everything I am doing in last few years is on AVID...
    Have a second monitor..
    I am very portable and rest of the gear I usually get where ever I work at.. I am looking into getting a good broadcast monitor connected with AJA thunderbolt..
    Like I said this is very open question, there is no (BEST) it all depends what you will be doing.. If you get AVID (which can do everything, however is cluncky as **** and counter intuitive) but you are only cutting wedding videos and short format stuff, it would be an overkill galore.. Just get FCP X in that case... Simple,easy, one app...
    Be more specific and you will get clearer answers..

  • Does Hibernate throw and error if the result set is above a specific #

    Does Hibernate throw and error if the result set is above a specific #
    of records?

    why do you ask?Maybe he hasn't been able to find the bug in his code yet, so he's casting further and further about for more and more esoteric explanations for what he's seeing? ;-)
    (God knows I've been there...)

  • Set "always show all icons and notifications on the taskbar" via Group policy

    Any ideas on how to set "always show all icons and notifications on the taskbar" on a set of users?
     I thought it would be under User Configuration\Administrative Templates\Start Menu and Taskbar, but I cannot find it.
    Anyone know if this can be enforced via policy?

    Hello,
    Thank you for your post here.
    Unfortunately, there is not any group policy settings which can set "always show all icons and notifications on the
    taskbar".
    To distribute the setting, you can create a default domain user profile and copy it to the following network share.
    When the domain user account is first logged onto the domain, the default profile will be applied.
    \\<Server_name>\NETLOGON\Default User.v2
    How to customize default user profiles in Windows 7 and in Windows Server 2008 R2
    http://support.microsoft.com/kb/973289
    This would only apply if a new profile is created, not for existing ones.

  • HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

    I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

    I would complete unlocking as is and then
    restore as new once you know the iPhone is unlocked
    Be aware Orange will process the request at their speed
    one of the reasons they usually reside at bottom of User Sat surveys
    will likely take weeks
    This may also help
    http://support.apple.com/kb/HT5014

  • Is there a way of opening up old PSD documents and photos on the iMac please?

    Is there a way of opening up old PSD documents and photos on the iMac please?

    .psd (photoshop) files should open in preview to view them and make some simple adjustments. 
    If you want to edit them but don't want the expense of buying Photoshop (or Elements) for your Mac, consider downloading Gimp - it's free.
    http://www.gimp.org/downloads/

  • How do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series

    how do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series (specifically an IQ524)
    This question was solved.
    View Solution.

    Doesn't it use an external AC Adapter? If so, all you should need to use in another country is an adpater plug to match the wall socket.
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

Maybe you are looking for

  • Help with animated gif please!

    Can you embed an animated gif into emails as a signature? i have tried it in entourage and outlook, but the gif seems to stick on the first frame. The animation works fine if viewed in a browser etc. I have also made the email html format. any ideas?

  • Why linebreak when i write to file???

    When my encryption program returns the encrypted string and I write that string to a file, it producces a linebreak if my string is to long?? why? can someone please help me. I can't decrypt my file cause i read each line and decrypt it seperate. the

  • Oracle Terminal problem

    I have a problem running Oracle Terminal in command-line mode on Linux. I am very familiar with Oracle Terminal on Windows, but not with Linux. Unfortunately, I need to support Oracle Forms6i on Linux in character mode for the hand-held, wireless, ba

  • New Window/Different Mode

    Is there any way to open a new window for a document and assign it a different mode? For example, I want to work on a color RGB image, but check the results in real time on a second doc window set to greyscale. Any ideas? Thanks, David

  • Where can I find a list/screen shots of Firefox (Aurora) 11?

    I am still using Firefox 3.6, as I didn't like the changes in later versions. I do not want to download Aurora unless I can see what it looks like, and a list of changes from the previous version. For example, does Aurora support the Google toolbar?