Is there a sale for father's day?

Is there a sale for the ipad for father's day?

Apple will sell the iPad for the same price as it did on Mother's Day (and yesterday, today and tomorrow).
 Cheers, Tom

Similar Messages

  • Calculate sales for last 60 days

    hello
    want to make key figure or formula, which calculate sales for last 60 days, but also i need to add week group in report, so for each week i need sum sales for last 60 days before this ...
    is any solution to that?
    thank you.

    Alex,
    I'm not very clear on what you are asking.
    If you use your time parameters in selections you can use caldays and weeks with your key figures.
    ie. Selection 1 has your key figure and calday restricted t the last 60 days.
    Selection 2 has your key figure and Fiscal Week but I am not clear on the range required for fiscal week.
    Regards
    Gill

  • Is there a possibility for a one-day-test for "Adobe ExportPDF"

    Hi
    before I order "
    "Adobe ExportPDF"
    I would like to test this service /OCR-Engine.
    Does anybody know how good the OCR is for documents which have been scanned in with a flatbed scanner and tranfered into PDF with 300dpi?
    Does it recognize german documents? Could I test this for one document, before I buy the service for one year?
    Thanks
    Jochen

    Hi Ajlan,
    thank you for your reply.
    Is the Adobe ExportPDF service (engine) equivalent to Adobe Acrobat XI
    pro software?
    Or is it different. I ask especially, if the Adobe ExportPDF service
    give me back a word/spelling checked/corrected PDF or just as in Adobe
    Acrobat XI pro, whereafter I have to do the correction myself.
    Thank you
    best regards
    Jochen
    Am 19.02.2014 04:19, schrieb Ajlan huda:
    >
          Re: Is there a possibility for a one-day-test for "Adobe ExportPDF"
    created by Ajlan huda <http://forums.adobe.com/people/Ajlan+huda> in
    /Acrobat.com/ - View the full discussion
    <http://forums.adobe.com/message/6134491#6134491

  • Need Avg sales for 90 fiscal days - thru customer exit or Offset  ? ? ? ?

    Hi Frns!
    My current report generates daily sales for fiscal period using a customer exit variable A.
    My requirement now is to have one more column having Average sales for 90 prior fiscal days when i enter a fiscal period thru the same variable A.
    As the customer exit variable is of Selection Options, I'm unable to create Offset for the same.
    Guyz do need ur help on this urgently.
    Cheers! Shana

    Any updates !!!!!!!!!!!!!

  • Sales of Last two days of each week in a given Posting Period ???

    Hi,
    Here I would like to share one of my tech. requirement in Bex query, your inputs are much appreciated -
    Scenario - In report I want to show "Sales for Last two days of week". I elaborate more like -
    (1) User inputs will be given for "Fiscal period" through Variable.
    (2) In Row all weeks lying in this period will be displayed.
    (3) In Column 1, Sale for each week will be shown.
    (4) In Column 2, Sale for Last two days of each week is to be displayed. (here we need to restrict Sales with last 2 Calendar days of each week.)
    Point 4 is of my concern. Any suggestions will help a lot. Points must be assigned.
    Regards,
    Saurabh

    Hi,
    I do not have a very good solution for you - see if this is of use.
    Firstly, I am not sure if it is possible to show the query like you want, with the weekly sales and the "last 2 day/week" sales combined and intertwined in one query.
    To create a query which will only show the sales of last 2 days of every week, what you can do is to create a variable on 0calday which will be 'multiple single values' type and will be calculated based on the user input of fiscal period (exit variable). This exit logic should assign the variable the last 2 days of each week falling within this period.
    Now you can put 'week' in the in the rows and restrict the query filter using the 0calday variable; put the KF in the columns area. This would lead to one row being displayed for each week and sales for only the last 2 days showing in that row.
    Creating a query for weekly sales is simple - maybe then you can put these two queries side by side in a workbook/web template.

  • Pivot sales analysis report by day for a particular month - sap has by month and annual

    Hi guys,
    I'm trying to come up with a pivot sales analysis query report for items for the month by displaying individual days sales, sales amount, gross profit, gross profit %
    e.g
    Month of March
    1st, 2nd, 3rd, 4th.....31st march. In sap their is a sales analysis report by
    days of the month
    1st March
    2nd march
    31st march
    item no
    item description
    Qty
    sale amount
    gross profit
    gross profit%
    qty
    sale amt
    gross profit
    gross profit %
    Qty
    sale amt
    gross profit
    gross profit %
    sugar
    20
    20,000
    5,000
    25
    30
    30,000
    10000
    33.3
    40
    40000
    15000
    37.5
    n02
    n03
    no4
    Regards Brian

    Hi,
    Due to pivot limitation, not possible to get above data in pivot table.
    Try this simple query which matches system sales analysis by item.
    SELECT t1.itemcode as Itemcode, T1.[Dscription] as 'Item description',  sum(T1.[Quantity]) as Qty, sum(T1.[LineTotal]) as 'sales amount', sum(T1.[GrssProfit]) as 'Gross Profit'
    FROM OINV T0  INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry WHERE month( T0.[DocDate]) = '1' and year( T0.[DocDate]) =2014 GROUP BY T1.[ItemCode], T1.[Dscription]
    Thanks & Regards,
    Nagarajan

  • I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, problem comes back.

    I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
    Camera works, with the side buttons it takes pictures.
    Although I'm not able to see on the screen.
    Mike

    First try a restore from backup
    If problem still occurs try a restore to factory defaults/new Pod.
    If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order.

  • I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!!

    I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!! But if there is a way that they could get in and take over my phone with a new number without me deactivating the iPhone and activating a different phone with my number.

    lost mode don't depend of the sim card. If you take your Iphone on Lost mode... anybody can use it with the original card sim or with an other one.
    Did you try to localise it ?
    But hope that thief don't make a restore of the Iphone... Call your Mobile Operator to try to block the IMEI Number.

  • My iphoto9 has not been able to open for over 10 days!!  I can't load my Christmas pics, etc.  I know the pics are still there because I can access them through a round about way.  Can anyone help me to OPEN iPHOTO!?

    My iphoto9 has not been able to open for over 10 days!!  I can't load my Christmas pics, etc.  I know the pics are still there because I can access them through a round about way.  Can anyone help me to OPEN iPHOTO!?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Is there an issue going on with the iPhones? And iPads? I cannot send text pics.  I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania.  This has been going on for a few days!!!  It is happening with and without upgrades.

    Is there an issue going on with the iPhones? And iPads? I cannot send text pics.  I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania.  This has been going on for a few days!!!  It is happening with and without upgrades.

    Contact facebook to address the facebook issues.

  • Is there a product for the IMac that is essentially a sales contact software?  I am a user of ACT Contact Software for pcs

    Is there a sales contact software (database) for the IMAC?  I have been using ACT Contact software for the pc for years.

    There are numerous contact management applications. Not sure if one is specifically devoted to sales contacts, but you can look for what's available either at the App Store (if you have 10.6.6 or later installed) by clicking on the App Store icon in your Dock or in the Applications folder. You can also search at MacUpdate or CNET Downloads

  • My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    My iPod Touch 4G just shut off one day while i was using tap to post. tried everything and nothing is working not even iTunes! Is there any hope for me? my iPod is my LIFE!!!!!!!!!!!!!!!! oh by the way none of this happened until i updated to iOS 6.

    I have not had any experience in getting any devices repaired so I'm not sure which store to resort to. An official Apple store should more than likely get you what you need, but I'm guessing it's probably more expensive. (if any cost for your situation)
    I hope you get your problem resolved.
    ~Lt. Leviathan

  • HT5567 Appstore not loading on my new ipad for last 2 days. Any hep out there?

    Appstore not loading on my new ipad for last 2 days. Any hep out there?

    http://www.apple.com/support/itunes/contact/

  • Is there any heirarchy for retreiving theorg unit or sales office data for

    Hello,
    If there is only one crm user which is assigned to different sales offices,then while monitering any activity from which sales office or org unit does the data is displayed.
    Is there any heirarchy for retreiving theorg unit or sales office data for an employee?
    regards,
    divya

    IF NOT it_vbrk[] IS INITIAL.
      Fetching Material no, sub-family, tint and coating codes
        SELECT vbeln posnr fkimg vrkme prsdt netwr matnr arktx mwsbp subfam
               codcol codcoat epaiscom codtyp length width
               INTO CORRESPONDING FIELDS OF TABLE it_vbrp
                           FROM vbrp
                               FOR ALL ENTRIES IN it_vbrk
                               WHERE vbeln   = it_vbrk-vbeln AND
                                     subfam  IN s_subfam AND
                                     codcol  IN s_codcol AND
                                     codcoat IN s_coat AND
                                     epaiscom IN s_thick.
    endif.

  • Is there any provision for viewing Sales Order at a plant level?

    Salute All !
    Is there any provision for viewing Sales Order at a plant level?
    Please provide TCode or any other way.
    Rgds
    Srivastav

    Hi
    Go to SPRO>Sales & Distribution>Sales>Lists>Define selection criteria.
    Select the Programme "SAPMV75A" , Trnsaction group=0 and pu display group=K and select the field =WERKS.
    Hope it will resolve.
    Regards
    Sanjay

Maybe you are looking for