Is there a selecting tool for doctoring specific portions of an image?

In Photoshop I can use a select tool to outline the specific area I want to work on in a photo. Is there a similar tool in Aperture? I'm away from my own computer, no manual, and my client's Aperture help doesn't seem to respond.
b

Not like PS.
There are plug-ins that allows for editing part of the image. But Ap will create tiff file and plug-in editor will do its thing them saved back into Ap as a version. Or you can simply specify PS(CS/PSE) as an external editor and do what you want to do also.

Similar Messages

  • Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

    Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
    I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
    Reference: http://www.securityresearch.at/en/development/fortify/
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Hi Amalaraja Fernando,
    I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
    SharePoint diagnostic manager
    SharePoint enterprise manager
    What is SPCop SharePoint Code Analysis?
    Dmitry
    Lightning Tools Check
    out our SharePoint tools and web parts |
    Lightning Tools Blog | Мой Блог

  • If there is no data for a specific row, please don't show the row at all.

    Hi,
    If there is no data for a specific row, please don't show the row at all.
    how can this be done??
    Thanks in advance.

    Not clear no data for row?
    Did you try with Pivot table? that should take care of it.
    Let us know updates

  • Error in updating ALV field catalog in selection tool for Planning Book

    Hi ,
    I am Implementing BADI  '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
    This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
    1). INIT_OBJECT_LIST
    2). F4
    3). LOC_PROD_VALUE_LIST
    Please help on the same if u have any idea or clue.
    Thanks.

    Hi Srinivas!
    Where did you get your implementation from?
    It would be nice if you could debug your code!
    For the F4 method, have you seen this note?
    Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
    Also check this note. It contains selection modifications in the BAdI:
    Note 376902 - SDP selector: Basis corrections for BADI
    I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
    Thank you!
    Will
    SCM Support Consultant

  • Is there any upragde tools for SAP B1 to SAP ERP?

    Hi,
    I know, SAP B1 and SAP ERP are totally different SAP products.
    In my mind, maybe we should implement the new SAP ERP, and then, migrate the old master data from B1 to ERP...
    So, is there any upragde tools or procedure (or data migration tools)for the project of upgrade SAP B1 to SAP ERP?
    Is there any documentation for this?
    Many thanks in advance.
    BR,
    Randy

    It is not listed on the official roadmaps
    Lumira:
    https://websmp206.sap-ag.de/~sapidb/011000358700000212382013E.pdf
    Analysis Office:
    https://websmp206.sap-ag.de/~sapidb/011000358700000395262012D.pdf
    For Lumira we asked at BI 2014 the other week and they said they were working on it.
    You can register for this ASUG Analysis Office Roadmap and ask SAP on the webcast about it:
    May 12: Analysis Office Roadmap
    Same for Lumira - see these upcoming ASUG webcasts - especially Q&A:
    May 15: Lumira Self Service for Business User
    May 21: SAP Lumira Question and Answer Session

  • Is there a masking tool for Aperture 3?

    Hi all,
    I am looking for a tool or plugin to remove background on images. Something along the lines of Topaz Remask or Onone Software Mask Pro, products which unfortunatly does not support Aperture 3...
    Thanks in advance,
    François Meehan

    Hi François.  There is not -- at least not one you'll be happy with.  You'll need a graphics program for that.  Aperture is a superb digital photograph storage, development, and publishing platform, but it doesn't do compositing, which is what you asking for.
    This message contains some more information.
    Note that should you wish, you can open any Image in an external editor of your choice, edit it as you wish, and save your changes back to Aperture.  The use of an external editor breaks the non-destructive workflow at the heart of Aperture, however.
    Message was edited by: Kirby Krieger

  • Is there a text tool for Aperture?

    I would like to print a photo from Aperture or iPhoto with a text title someplace inside the photo, to use as a cover for a DVD. I searched for any text tools but none available (you can write text when printing a book which is not what I need). I solved my problem by using HeliosPaint but was wondering why Aperture does not have it available.

    I solved my problem by using HeliosPaint but was wondering why Aperture does not have it available.
    Because that's not what Aperture is meant for. That said, you can use the book tool to create this type of layout and export the page as a pdf. You can also use the print dialog to add text and print to pdf. There's also the free BorderFX plugin (here I go again) that can do the job.
    But really, the best thing is always to use the right tool for the job. Aperture has minimal design capabilities simply because it's not a design app.

  • Safari 7 - how do you delete bookmarks?  Is there a general tool for managing bookmarks?

    I am trying to manage many duplicated and unorganized bookmarks in safari 7.   I bought an app - ibookmarks but it doesn't seem to work.  Is there a recomended tool I could use vs. going one by one?
    Thank you,
    Jay

    I have soo many and many duuplicates that the folder is useless - handling them one by one isn't an option.  I did discover if you hold down the shift key and select the bottom most bookmark you want to delte you can kill many at once but it doesn't really allow you to do much more than a bulk delete ...... what happened to the screen where you could edit the bookmarks in a folder .... your help is appreciated.

  • Is there any monitoring tool for web server and application server ?

    experts,
    I just want to know that is there any monitoring utility which being used to monitor the web server activities like threads web console session tracking and so on..
    I am using Jboss as my application server.If you suggest any monitoring tool for Jboss It would be helpful for me,

    You may use jConsole

  • Are there any recovery tools for optical media?

    I've had a couple of DVD's  turned in to coasters recently and I was hoping that Linux could come to my rescue with some awesome 'raw-read' / recovery tools for optical media?
    I burnt the discs in Windows 7 using InfraRecorder on a brand new Plextor drive (a 'PX-891SA') and these are my first attempts to burn discs with it so I'm a bit worried it could be a hardware fault!
    I started off trying to back up some files to clear some space on my hard-drive, burning them to a dual-layer dvd, but the software kept failing to even start the burn process -- that was until I realised that I needed to run the program "as Administrator" (in Windows). It did then manage to burn the disc (I was using "Session-at-Once" mode) however when it came to the end of the burn process / the start of the 'verify data' phase it threw an error saying the write process had failed! Windows couldn't access the disc / data and (I think) still thought the disk was empty. So I restarted the burning application and used a function to just 'close' the whole disc. This seemed to work because Windows was then able to recognise the disc and read the data, although accessing the disc was slow and sounded 'stutter' ish.
    I then tried to write a single layer dvd to finish off the last couple of gig I had to back up, but again the software completed the burn phase only to report a 'fail' error right at the end (I'm assuming) before finalising the disc. Although this time I'd tried to create a multi-session disc by using the '2XXA' (or something) 'Multi-Session' iso9660 format. The result was that Windows couldn't read the disc and still thought it was empty, even after trying a forced 'close disc' operation! -- Linux however could read the disc and see that the data had in fact been burnt to the disc (although I've not yet tried copying it in Linux!).
    Finally I needed to burn a load of archives to a couple of discs (totaling ~9GiB) -- starting with a dual-layer dvd first everything seemed to be working fine, the burn process started okay and the write buffer was full etc., until at what I assume was the layer change-over it all came to a grinding halt and threw another 'write operation failed' error, only this time I can't even mount the disk in Linux....see 'dmesg | tail' output below:
    [ 5758.353005] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 5758.353015] ISOFS: Interleaved files not (yet) supported.
    [ 5758.353016] ISOFS: File unit size != 0 for ISO file (1472).
    [ 5758.353019] ISOFS: changing to secondary root
    [ 5758.353035] ISOFS: Interleaved files not (yet) supported.
    [ 5758.353036] ISOFS: File unit size != 0 for ISO file (1536).
    [ 5758.353037] isofs_fill_super: root inode is not a directory. Corrupted media?
    Does anyone have any thought or suggestions that might help?
    - Is it likely to be a hardware fault? (I bought a Plextor because I thought they were one of the best!)
    Maybe even if I could just close the session all would not be lost?
    -- Thanks in advance --
    >>>> UPDATE >>>>
    I tried to use ddrescue....it was fine until it got to the end of the disk and then it sounded like the drive was chewing on a bag of pork scratchings
    $ sudo ddrescue -v /dev/sr0 /mnt/odd/ddr.file ~/ddr.log
    GNU ddrescue 1.16
    About to copy 4029 MBytes from /dev/sr0 to /mnt/odd/ddr.file
    Starting positions: infile = 0 B, outfile = 0 B
    Copy block size: 128 sectors Initial skip size: 128 sectors
    Sector size: 512 Bytes
    Press Ctrl-C to interrupt
    rescued: 4028 MB, errsize: 983 kB, current rate: 0 B/s
    ipos: 4028 MB, errors: 1, average rate: 3310 kB/s
    opos: 4028 MB, time since last successful read: 10.8 m
    Splitting failed blocks...
    Interrupted by user
    ...it was taking forever and getting nowhere so I just pressed 'ctrl+c'.....here's the log file:
    # Rescue Logfile. Created by GNU ddrescue version 1.16
    # Command line: ddrescue -v /dev/sr0 /mnt/odd/ddr.file /home/shodan/ddr.log
    # current_pos current_status
    0xF0213000 /
    # pos size status
    0x00000000 0xF0208000 +
    0xF0208000 0x0000B000 -
    0xF0213000 0x0000D000 /
    0xF0220000 0x00000400 -
    0xF0220400 0x0001FE00 /
    0xF0240200 0x00000400 -
    0xF0240600 0x0003FE00 /
    0xF0280400 0x00000400 -
    0xF0280800 0x00077600 /
    0xF02F7E00 0x00000200 -
    When I tried to mount the output file using $ sudo mount -ro loop /mnt/odd/ddr.file /mnt/vodd I got the same error as with the actual disc (natch)...
    mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so
    Last edited by wwgfd (2012-12-14 13:18:41)

    @chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
    I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
    The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
    However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
    ...the other folders did copy okay though!
    It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
    @ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
    @alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
    Thanks for the help!
    (pre-post) UPDATE >>> I've just mounted my Windows partition  in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

  • What are the best tools for converting .shg files to HTML image maps?

    After trying several different ways to import our WinHelp
    project into RH HTML, I'm left with recreating the project in HTML.
    There are over 200 .shg files. What's the best tool for converting
    them? Is there a free program that converts them? Or is there a
    better way?
    Lacona

    Yes, I have not been able to import the .hlp file, which was
    my last posted question/issue. I have tried creating a Microsoft
    HTML layout in RH4 Word; it begins to compile and, somewhere in the
    process, just freezes. I've tried importing the .hlp file into RH
    HTML; same result. I've tried creating a new HTML project with the
    .hlp file; same result. If I could import the file, it'd be great.
    Otherwise, I'll need to recreate the entire project, which brings
    me to converting the .shg files. Any ideas?

  • Is there a Migration tool for migrating Oracle forms 5 to Java

    Hi,
    I would like to know if there are any oracle tools available for migrating Oracle forms to j2ee.I read that " Oracle JHeadstart 10g" migrates the forms 6i to java/html.Does Oracle JHeadstart 10g also migrate forms 5 to j2ee.I am new to both oracle forms and j2ee and any information about this would be a great help.
    Thanks,
    Kevin

    Kevin,
    there are a couple of migration partners that offer their migration tool and many are listed on the otn page for Forms (otn.oracle.com/products/forms). You may want to make yourself a picture of how efficient such a migration coul dbecome
    Frank

  • Is there any designing tool for jasper reports

    Hi Friends,
    i want some information, some one is told in jasper reoperts one dising tool is there this is just drag and drop feciity .
    can u give me that information
    Regards
    Raghava

    Yep. iReports

  • Are there Sensory Accessibility Tools for Safari?

    Hi,
    I have sensory processing issues. Obviously these are worse everywhere else, and when trying to go about in public without getting hit with incapacitatingly painful sensory bombardment, but these are still needlessly frustrating on the web. I understand that these are common issues for autistic people, as well as other people with sensory processing disorder, fibromyalgia, multiple sclerosis, Lyme disease, and so on, although I seem to have uncommonly bad issues here.
    A lot of websites, including parts of this website, use autoplay, animated gifs, animated backgrounds, etc. What Safari add-ons are available to disable all these things unless and until we want to enable them? Why do web browsers enable autoplay anyway, and why don't they disable it as a basic accessibility feature?

    Well and Antivirus software with PARENTAL CONTROL! If you want to have control over what your kids can see and not, that's what you should take a look at.

  • HT5392 How can I use an Action List to re-order my layers in iAd Producer?  It looks like there's a tool for this, but I can't figure out how to use it.  I want to use a button to switch between a text field and a drawing pad layer.

    I am working on an iBooks Author Widget and want to allow the user to switch between drawing-pad functions and a text field on screen.  I'd like to create an action that will automatically re-order the layers so that the text field is accessible when typing but covered when writing by hand.  Then, I'd like the opposite to be available, so that the text field is accessible when typing, but the drawing pad is left alone.

    Have you tried using the selections in the Encore menu viewer that show you selected and activated states?

Maybe you are looking for

  • Inspection lot creation based on "right" inspection plan version

    I manage inspection plan ( inspection lot origin 01 ) with Change number; in this way I have differents inspection plan version based on date. When I do a Good Entry based on purchase order , I need that system creates inspection lot version based on

  • ? on upgrading to MacBook Pro from MacBook

    I need more screen real estate and love the metal look of the MacBook Pro, any comments from anyone who has upgraded, good or bad. Specifically, have you had any connectivity issues on the MBP?

  • Advice for logical workflow for color correcting and color grading

    I am an experienced user of  PPRO CS5.  I am a novice with color correcting and color grading.  I am also just barely competant in AE CS5.  It has been suggested that I use AE for color correcting my footage.  Can you advise me as to the most logical

  • Report header scroll

    Hi everyone, I have built a SQL report with a template that i have built (no apex template) and in the SQL Query, I wrote follows: htp.p('<table>'); htp.p('<thead>'); htp.p('<tr>'); htp.p(v_headings); htp.p('</tr>'); htp.p('</thead>'); htp.p('<tbody>

  • Microsoft-Windows-StorageSpaces-Driver Initialization error

    Hello, I have a enclosure device connected to PCIe HBA and I am not able to see the chassis serial number and the RPM of the devices that are connected to this HBA.  The device has a Enclosure Services Process. I see the following error in the window