Is there a service or a person who can analyze my console log and tell me why my Mac is screwy?
My Mac sometimes just goes out to lunch for short or medium periods of tiem and sometims fails to display my typed characters for a while dumping them on the screen a few second later - often missing some key strokes
I would love to get some help on this - willing to pay but have no idea where to go - maybe a service? maybe an Apple Genious? Maybe csomeone here?
entries like these seem to maybe be a clue if someone understands them
1/28/14 3:45:50.186 PM accountsd[1772]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
1/28/14 3:50:54.620 PM com.apple.IconServicesAgent[1782]: IconServicesAgent launched.
1/28/14 3:55:26.405 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Skype" for over 1.00 seconds. Server has re-enabled them.
1/28/14 3:55:26.474 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Skype" after 11.04 seconds (server forcibly re-enabled them after 10.97 seconds)
1/28/14 3:56:31.403 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Activity Monitor" for over 1.00 seconds. Server has re-enabled them.
1/28/14 3:56:31.430 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Activity Monitor" after 10.97 seconds (server forcibly re-enabled them after 10.95 seconds)
1/28/14 3:59:28.159 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "PluginProcess" for over 1.00 seconds. Server has re-enabled them.
1/28/14 3:59:28.159 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "PluginProcess" after 1.11 seconds (server forcibly re-enabled them after 1.11 seconds)
1/28/14 4:01:58.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1796[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
1/28/14 4:04:48.120 PM com.apple.backupd[1802]: Starting automatic backup
1/28/14 4:04:49.265 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
1/28/14 4:04:50.252 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.99 seconds (server forcibly re-enabled them after 1.00 seconds)
1/28/14 4:05:08.632 PM com.apple.backupd[1802]: Backing up to /dev/disk1s2: /Volumes/Laguna TM/Backups.backupdb
1/28/14 4:07:23.263 PM WindowServer[96]: disable_update_timeout: UI updates were forcibly disabled by application "Skype" for over 1.00 seconds. Server has re-enabled them.
1/28/14 4:07:27.747 PM WindowServer[96]: common_reenable_update: UI updates were finally reenabled by application "Skype" after 5.48 seconds (server forcibly re-enabled them after 1.00 seconds)
1/28/14 4:08:13.235 PM fseventsd[48]: client_buffer_flush: failed to send 32 events to client pid: 1802 (status: 268435460)
1/28/14 4:09:30.740 PM com.apple.backupd[1802]: Will copy (14.5 MB) from Macintosh HD
1/28/14 4:09:34.282 PM com.apple.backupd[1802]: Found 189 files (14.5 MB) needing backup
1/28/14 4:09:35.970 PM com.apple.backupd[1802]: 2.34 GB required (including padding), 120.28 GB available
1/28/14 4:09:53.599 PM SystemUIServer[229]: Timed out waiting for value of SOAccountInfoMessagesAccountState
LN
updated EterCheck report - new version
Hardware Information:
iMac (27-inch, Late 2009)
iMac - model: iMac10,1
1 3.33 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 4:34:35
Disk Information:
Hitachi HDS722020ALA330 disk0 : (2 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 2 TB (361.44 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5680H
USB Information:
Hewlett-Packard HP LaserJet 200 color M251nw
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Logitech USB Receiver
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Other World Computing Oxford ATA Device 00 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
Laguna TM (disk1s2) /Volumes/Laguna TM: 749.81 GB (119.66 GB free)
Thunderbolt Information:
Kernel Extensions:
com.silex.driver.sxuptp (1.5.1)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.bombich.ccc.plist 3rd-Party support link
[System] com.bombich.ccc.scheduledtask.74D1CCBE-45AB-4844-A903-AD3B05812360.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.Affinegy.InstaLANa.plist 3rd-Party support link
[System] com.brother.LOGINserver.plist 3rd-Party support link
[System] com.epson.ecpd.launcher.plist 3rd-Party support link
[System] com.sony.PMBPortable.AutoRun.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.bombich.ccc-user-agent.plist 3rd-Party support link
[not loaded] com.ecamm.printopia.plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] ltcm.plist 3rd-Party support link
User Login Items:
Activity Monitor
Skype
TypeIt4Me
Belkin Router Monitor
Mail
Dropbox
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
WebEx64: Version: 1.0 - SDK 10.5 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Growl 3rd-Party support link
Printopia 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Users/[redacted]/Library/Application Support/WebEx Folder/1124
Meeting Center: Version: 12.27.23.0 - SDK 10.5 3rd-Party support link
asannotation2: Version: 10.21.23.0 - SDK 10.5 3rd-Party support link
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
Device Selector: Version: 1.5.5 - SDK 10.5 3rd-Party support link
/Library/Printers/Brother/Utilities/DeviceSelector/DeviceSelector.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
convertpdf: Version: 1.2 - SDK 10.5 3rd-Party support link
/Users/[redacted]/Library/Application Support/WebEx Folder/1124/convertpdf/convertpdf.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
WeatherSnoop: Version: 2.1.5 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/iWork '09
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Printers/Brother/Utilities/Server
NETserver: Version: 1.1.6 - SDK 10.4 3rd-Party support link
USBserver: Version: 1.1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
EpsonSuppliesTool4: Version: 8.61 - SDK 10.5 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 2 Disk used: 1
Destinations:
Laguna TM [Local] (Last used)
Total size: 698.32 GB
Total number of backups: 48
Oldest backup: 2013-03-14 15:01:38 +0000
Last backup: 2014-01-29 23:32:47 +0000
Size of backup disk: Too small
Backup size 698.32 GB < (Disk used 1 X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% PluginProcess
3% WindowServer
1% backupd
1% EtreCheck
1% Finder
Top Processes by Memory:
680 MB Finder
133 MB com.apple.WebKit.WebContent
131 MB Mail
106 MB com.apple.IconServicesAgent
90 MB Safari
Virtual Memory Information:
51 MB Free RAM
3.18 GB Active RAM
3.22 GB Inactive RAM
826 MB Wired RAM
1.13 GB Page-ins
80 MB Page-outs
Similar Messages
-
I will give $100 to the person who can solve this problem once and for all.
I'm not even kidding, dude. We can do PayPay, I'll mail you a check, whatever you want. That is how frustrating this is, that is how badly I want it fixed, and that is how much overtime I've worked lately thanks to being shorthanded at my place of biz-nass. I'm an hombre of my word, so if you actually come up with a solution that works, the cheddar will be yours. Okay let's hit it.
It's the skipping thing. First 10-12 seconds of a song - every song - will play fine, then iTunes skips, stutters, and basically does the god **** hokey pokey and shakes it all about. It happens most notably with songs that I double-click to play, but I'm pretty much noticing it on any song now after a transition is made. I've been using iTunes for ages and this didn't happen until the upgrade to 7.3. I have poured over these forums for nearly a week, tried every solution offered (even offered one of my own that actually worked for maybe four days before the whole thing started up again) and NOTHING. To save us all some time, here's what I've tried:
- Downgrading. I'll admit I didn't do this correctly at first. I didn't remove everything according to the support guidelines, but I went down to version 6.05 and that did nothing to quell the skipping. I upgraded back up to 7.3 because hey, why not, and attempted the remaining trial fixes. I have since removed both iTunes and Quicktime, step my step according the the guidelines, and not only have I downgraded to my current running version of 7.2, I put both of the programs on my F drive (as opposed to the default C drive), my gigantic bonus internal drive where I typically keep nothing but my giganto music library. I thought putting the app on the same drive as the music might fix things. I thought wrong. Dead wrong. Dead diddly dum iddly wrong.
- Quicktime settings. My settings for Quicktime have always been in safe mode with the output size at 16 bits. So when I saw this "fix" I just rolled my eyes. I used to have that dealio back in the dizzle when iTunes would just get all static-y and skip when I'd open other programs or even just minimize it, so that fix worked for that, but it's nothing compared to this. In simpler terms, that fix is like Superman, and this skipping? The kryptonite. Actually that's probably not a great metaphor, but we've got a ways to go and this is going to get mucho boring if I don't throw some chuckles out there. Ready for fix three? Giddy up!
- Turn off cross-fade? It's never been on. I never really got the appeal of that, and also I think it resulted in some minor skipping back in the d. I also attempted similar fixes like turning off the equalizer, messing with the volume, closing last.fm, REMOVING an old album art retrieval program from back before iTunes got its **** together with album art, ANYTHING that might interfere with playback was turned off, removed, b-slapped, and sent crying home to its moms. Nada.
- Recreating my library. This was the fix I offered someone else, because it actually did the trick for a few days. After an entire night spent reimporting 73 gigs worth of music, it played fine, but I did lose a ton of album art, playcounts, etc, so you can imagine how ****** I was when this wound up not being a permanent fix. I was beyond ******. I was livid. But I was taught in the dojos of my youth to channel my anger into productivity, and instead of sculpting a lovely bonsai tree, I set out to fix this pup once and for all.
- That darn anti-virus! This was the final fix I tried, even though I wasn't using any of the culprit programs listed in the forums as causes of the skipping, and even those offering this as a solution confessed it was pretty hit or miss. But having tried everything else, having resorted to playing my music on MediaMonkey of all things, I figured I'd give it a shot. I used (reason for the past-tense forthcoming) AVG Anti-Virus, Lavasoft AdAware and something called Spyware Doctor that I think just came bundled with XP. I removed all of them. I had just done a virus scan recently to see if that's what was causing this, so I figured I'd be okay until I could redownload them after this fix wound up not working. And it didn't work, so there's that.
There may be a couple of fixes I've tried that I'm forgetting now, since I'm delirious after spending practically every night for the past week trying to fix this problem, while my girlf, Heather, sits and laughs at me while watching Clark and Michael on her MacBook. In fact, she's laughing at the $100 offer as I type this, but I assure you, if you offer a solution that works, the money is as good as yours. If you come up with a workable solution, I'll have to test and make sure it isn't temporary like the recreating my library thing, but I won't leave you hanging once I'm satisfied that it's fixed for good. I know it's unorthodox, perhaps illegal in some states, but I'm desperate here, peeps. The ball is in your court, and I beg you not to give up the rock.
Gateway E-2000 Windows XPI think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.
-
My $20 to the person who can write this simple script for Fission
Here is what I need to automate. I don't care if it's an Apple Script, or an Automator work flow - whatever - just so it will work with my present setup. Once I test it and it works, I'll send $20 to the first person who can help me.
Script needs to apply to each (and every) MP3 file in a selected folder:
Open the first file with Fission v1.6.6 (from: www.rogueamoeba.com)
Select all
Normalize
Save audio (in same folder)
A warning dialog pops up: "File already exists..." -- answer with "Replace"
Close file
Repeat for next file in the folder, until every file has been Normalized
End script when the last file in folder has been Normalized
I don't mind finding the folder (which will be in my iTunes Library), and then starting the set of actions on the folder but I definitely don't want to be required to take any additional action on each and every file.
I'm presently running Fission v1.6.6 under MacOS 10.4.11 on a PPC desktop, so it needs to work in that environment.
Note that the latest version of Fission requires MacOS 10.5 - I can't use any script that requires that version. Rogue Amoeba's Legacy software page (http://www.rogueamoeba.com/legacy/) shows Fission v1.6.8 as working with 10.4, but that contradicts the Version History for Fission which shows 1.6.6 as the last one for 10.4 - still investigating.Pierre L.
Thanks for the effort!
First, I can clarify this: Rogue Amoeba confirms that I can use the version 1.6.8 of Fission located on their Legacy page with my OS version 10.4.11, so I've upgraded from 1.6.6 to 1.6.8. Seems to be working OK.
Next, let me apologize for being mostly ignorant about all things AppleScript. I'm really in over my head, here, because I've not used the ScriptEditor for more than a few minutes before today.
What I've done so far:
I checked the box in the Universal Access preferences pane to enable access for assistive devices.
I copied your script from this forum and pasted it into Script Editor.
I've Compiled your script, then "Saved As" an "Application" on my Desktop.
When I double click the icon for the saved script (which ends in xyz.app), a navigation window appears, which I used to select a test folder on my desktop.
When I Choose the test folder, Fission launched, and selected the whole file, as expected. Then I get an error:
"NSReceiverEvaluationScriptError: 4" - with buttons to "Edit" or "OK"
Thinking it might be a timing error, I edited the delays:
set theFolder to choose folder
tell application "Fission" to activate
tell application "Finder"
set theApp to POSIX path of (get file of process "Fission")
set theFiles to document files of theFolder
repeat with thisFile in theFiles
open thisFile using POSIX file theApp
tell application "System Events" to tell process "Fission"
delay 18 -- adjust if necessary
keystroke "a" using command down -- Select All
delay 2 -- adjust if necessary
click menu item "Normalize Selection" of menu 1 of menu bar item 7 of menu bar 1
delay 4 -- adjust if necessary
keystroke "s" using {shift down, command down} -- Save Audio…
delay 3 -- adjust if necessary
keystroke return -- Save
delay 2 -- adjust if necessary
click button "Replace" of sheet 1 of window "Save Audio"
end tell
end repeat
end tell
tell application "Fission" to quit -- optional
... Compiled, and Saved again.
Now, the script runs up to the point where it should answer the Save pop-up window: "File already exists..." with the keystroke to "Replace" - but the script stops there, with the same error: "NSReceiverEvaluationScriptError: 4"
Bottom line: so far, I've been able to get the first mp3 file in my test folder Normalized, but not Saved. Any suggestions? -
Is there anyone there? I hope there is someone who can you understand this problem and have the common sense to respond?
I open gmail. I want to save an email to one of my folders.
I position my cursor over the appropriate Folder icon or by choice, to the Trash.
The friendly finger pointing cursor icon changes to an arrow icon.
The hand icon allows me flawless access to opening and/or moving emails.
The arrow, however does not open the link.
On the Google menu bar the cursor hand with finger opens the links to Everett (my name), Search, Images, Maps and Play.
When I attempt to open the remaining links in the menu bar (YouTube, News, Gmail, Drive, Calendar and More) the arrow icon replaces the hand. The arrow icon does not work. It will not activate these links. Nor does it open email messages in the Inbox.
Usually I reset, even reboot Safire and sometimes the problem goes away, then reappears.
Can you imagine if this condition should it happen to a tech savvy Google Support person? Perhaps one can share and make my problem go away.
I am considering dropping Google as my mail source. Unfortunate!
Everett Halvorsen
[email protected]
718.490.3824I have uninstalled my Access Connection, but this problem seems to persist. IBM technician have changed the wireless card of my T60, the first few days after it was changed was very fine, no problem at all. About a week later, the problem occured again, and it happened quite frequently after that occurence. Now i really have no idea what is the cause and how to solve it. Will be greatful if there is anyone that can help me.
-
I have an unlocked iphone (Australia) and am traveling to Korea. Am I able ot use global roaming there, or does anyone know if I can buy a prepaid SIM and put it in my iphone 4S? Thanks!
I should mention that if you are deadset on using a Mac, then you can run Windows 7 or 8 in Parallels. You will find about a 10% speed reduction using a VM emulation. You will also need to have at least 8 GBs of RAM in your Mac to assure optimum performance of both OS X and Windows. Do not install a later version of Windows than is supported by your software.
-
I have a voucher to be used on the app store, is there anyway I can use it to purchase and download Microsoft Office for Mac?
No, only for apps available on the App Store. Office is not one of them.
-
Due to IOS it Said it could not restere backup to new iPad, so i set up as new iPad thinking i could restore from backup afterwards, Then I updated iOS but Joe it says there are no backups...White Can I find my backups and restore Then?
Pls ignore auto correct mistakes!I found a way to get to my data. So do not need remedy at this time.
fwiw, I changed my ios7.04 setup answer of restore from itunes to new iphone. Eventually that allowed me to set up icloud, then turn off find iphone, restore. Very strange ios update. -
Is there in fact a real, live MOZILLA TECH SUPPORT PERSON who can respond??
Is there ANYONE out there who can identify and correct the problem causing intermittent non-functionality of my ATT/Yahoo email on FF? Evidently this is indeed a FF issue, as my email works fine with another browser on my Ipad. Does Mozilla in fact have in-house tech support people??
To re-iterate the problem as I described it in this forum a week ago--but to which I had no response--I can open the email page, but it does not refresh to load new emails; I cannot compose and send, cannot delete, and cannot open any folders.
I re-set FF, re-loaded an earlier version (that subsequently up-dated to v.22 on its own), tried System Restore. I spoke with ATT tech support then as well--at least they have live support, for free--and at the conclusion of nearly an hour the problem went away--until today, again--despite the tech's assertion that she did nothing, that perhaps an up-date had not completed loading?
Today I downloaded the FF "Troubleshooter" software--that didn't help, either.
I REALLY would appreciate an upper-level technician from Firefox/Mozilla responding to this--with a solution!
Thank you!This is Mozilla's tech support. Like most providers of free software, mozilla doesn't have a dedicated phone support system, but this site is manned by both staff (like me) and community members. You get support for ATT because you pay monthly to use their services.
You should make sure you update to Firefox 23 (22 is out of date and no longer supported), and try all the steps at your previous post ([https://support.mozilla.org/en-US/questions/966272]). Specifically, try a new profile or Reset Firefox [[Reset Firefox – easily fix most problems]].
I'm going to lock this thread since it's a duplicate, and please follow up on your previous thread. Thank you!
<sub>fixed link ~J99</sub> -
Needed: Person who can help me set up mail service
Hi...I've been reading the forum for days and have been finding information in small bits and pieces...but I need someone who can help me put it all together. Basically, we are trying to move our mail server in-house. We have a better than T1 connection, I just need SOMEONE who can tell me exactly what we need to do to set up mail service on osx server 10.4.8 to work for us. Any takers?
I have enough knowledge to set up our web and file sharing services (very easy, no brainer stuff), but really I'm lost on the Mail Service setup.
Thanks!Hi
I hope this thread is not resolved. Even if it is, this is my solution.
0.1. You must have a domain name pointing to your public IP
0.2. Your router (if you have one) must forward smtp, pop, and imap ports to the private IP adress of the sever
Server Admin
1. You must have DNS enable with your domain name configured. I presume that you know to.
2. Setup your mail service
in General
2.1. Activate POP
2.2. Acivate Imap (if you need)
2.3. Activate SMTP
2.4. Accept incoming mail
2.5. Retain outgoing mail
in filter
2.6. Set up as you need
in advanced->security
2.7. Set up aurhentifaction for smtp and pop.(important for smtp because you can be a spam relay)
in advanced->Hosting
2.8. add your domain name in localhost window
Users admin
3. Go to your users account (mail tab)
3.1 Activate mail
3.2 Choose receipt method.
I've followed this procedure 5 or 6 times and it's working fine every time.
Be carefull. In 10.4.8, something change in Imap service and the send of messages dont work. There is a little corrective to apply (a line to change in a config file but I do not remember what)
Sorry if the words are not exactly the same on you screen. I'm working on a french vs and my english is not very good.
Good luck
Vinc' -
I will PAYPAL 100 bucks to the person who can help me with 5510 issue
Below is a on going chat i am having with a PIX expert... Can anyone see where the problem is when you read the message below???
Cisco ASA 5510 configuration for host inside private network
Question: We have a Citrix host behind a new 5510 that needs to be accessed by the public. I have tried to follow the examples on cisco.com but still continue to get errors. I KNOW I am missing something simple. I have taken out all my 'tries' and have basic config below with errors.
I am new to PIX/ASA and would live some suggestions on the proper Access Group and corresponding ACL to get the 192.168.71.100/72.54.197.26 Citrix server to accept ssl from outside.
ASA Version 7.0(8)
interface Ethernet0/0
description Outside interface to Cbeyond
nameif OUTSIDE
security-level 0
ip address 72.54.197.28 255.255.255.248
interface Ethernet0/1
description Inside interface to internal network
nameif INSIDE
security-level 100
ip address 192.168.72.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.71.2 255.255.255.0
management-only
object-group service Citrix1494 tcp
port-object eq citrix-ica
port-object eq www
port-object eq https
port-object range 445 447
nat-control
global (OUTSIDE) 1 interface
nat (INSIDE) 1 0.0.0.0 0.0.0.0
static (OUTSIDE,INSIDE) 192.168.72.100 72.54.197.26 netmask 255.255.255.255
static (INSIDE,OUTSIDE) 72.54.197.26 192.168.72.100 netmask 255.255.255.255
route OUTSIDE 0.0.0.0 0.0.0.0 72.54.197.25 100
http server enable
http 192.168.71.0 255.255.255.0 management
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
Error Log:
3|Apr 15 2011 21:06:07|305005: No translation group found for tcp src INSIDE:192.168.72.75/57508 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 21:06:01|305005: No translation group found for tcp src INSIDE:192.168.72.75/57508 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 21:05:58|305005: No translation group found for tcp src INSIDE:192.168.72.75/57508 dst OUTSIDE:72.54.197.26/443
5|Apr 15 2011 21:05:42|111008: User 'root' executed the 'no access-list OUTSIDE_access_in extended permit tcp host 72.54.197.26 host 72.54.197.26' command.
4|Apr 15 2011 21:05:20|106023: Deny tcp src OUTSIDE:114.38.58.208/2817 dst INSIDE:72.54.197.26/445 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:05:17|106023: Deny tcp src OUTSIDE:114.38.58.208/2817 dst INSIDE:72.54.197.26/445 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:04:37|106023: Deny tcp src OUTSIDE:221.1.220.185/12200 dst INSIDE:72.54.197.26/1080 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:03:50|106023: Deny tcp src OUTSIDE:32.141.52.12/1787 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:03:44|106023: Deny tcp src OUTSIDE:32.141.52.12/1787 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:03:41|106023: Deny tcp src OUTSIDE:32.141.52.12/1787 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:02:23|106023: Deny tcp src OUTSIDE:32.141.52.12/1785 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:02:17|106023: Deny tcp src OUTSIDE:32.141.52.12/1785 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:02:14|106023: Deny tcp src OUTSIDE:32.141.52.12/1785 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
5|Apr 15 2011 21:01:56|111008: User 'root' executed the 'access-list OUTSIDE_access_in line 1 extended permit tcp host 72.54.197.26 host 72.54.197.26' command.
6|Apr 15 2011 21:00:13|302013: Built outbound TCP connection 7173 for OUTSIDE:150.70.85.65/443 (150.70.85.65/443) to INSIDE:192.168.72.100/2959 (72.54.197.26/2959)
6|Apr 15 2011 20:56:57|302016: Teardown UDP connection 7082 for OUTSIDE:72.54.197.26/137 to INSIDE:192.168.72.17/137 duration 0:02:01 bytes 62
6|Apr 15 2011 20:55:19|302013: Built outbound TCP connection 7088 for OUTSIDE:184.85.253.178/80 (184.85.253.178/80) to INSIDE:192.168.72.100/2879 (72.54.197.26/2879)
6|Apr 15 2011 20:55:19|302013: Built outbound TCP connection 7086 for OUTSIDE:74.125.159.147/80 (74.125.159.147/80) to INSIDE:192.168.72.100/2878 (72.54.197.26/2878)
6|Apr 15 2011 20:54:55|302015: Built outbound UDP connection 7082 for OUTSIDE:72.54.197.26/137 (192.168.72.100/137) to INSIDE:192.168.72.17/137 (72.54.197.28/24)
6|Apr 15 2011 20:54:17|302021: Teardown ICMP connection for faddr 10.160.68.225/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:15|302020: Built outbound ICMP connection for faddr 10.160.68.225/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:13|302021: Teardown ICMP connection for faddr 172.28.16.2/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7074 for OUTSIDE:199.7.52.190/80 (199.7.52.190/80) to INSIDE:192.168.72.100/2815 (72.54.197.26/2815)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7073 for OUTSIDE:199.7.55.72/80 (199.7.55.72/80) to INSIDE:192.168.72.100/2813 (72.54.197.26/2813)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7072 for OUTSIDE:199.7.55.72/80 (199.7.55.72/80) to INSIDE:192.168.72.100/2812 (72.54.197.26/2812)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7071 for OUTSIDE:199.7.52.190/80 (199.7.52.190/80) to INSIDE:192.168.72.100/2811 (72.54.197.26/2811)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7070 for OUTSIDE:184.85.253.19/80 (184.85.253.19/80) to INSIDE:192.168.72.100/2810 (72.54.197.26/2810)
3|Apr 15 2011 20:54:12|106014: Deny inbound icmp src OUTSIDE:172.28.16.2 dst INSIDE:72.54.197.26 (type 0, code 0)
6|Apr 15 2011 20:54:11|302020: Built outbound ICMP connection for faddr 172.28.16.2/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:10|302013: Built outbound TCP connection 7063 for OUTSIDE:64.4.18.90/80 (64.4.18.90/80) to INSIDE:192.168.72.100/2809 (72.54.197.26/2809)
3|Apr 15 2011 20:52:17|305005: No translation group found for tcp src INSIDE:192.168.72.75/56624 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:52:11|305005: No translation group found for tcp src INSIDE:192.168.72.75/56624 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:52:08|305005: No translation group found for tcp src INSIDE:192.168.72.75/56624 dst OUTSIDE:72.54.197.26/443
2|Apr 15 2011 20:50:02|106001: Inbound TCP connection denied from 187.28.118.35/1973 to 72.54.197.26/445 flags SYN on interface OUTSIDE
2|Apr 15 2011 20:49:59|106001: Inbound TCP connection denied from 187.28.118.35/1973 to 72.54.197.26/445 flags SYN on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60784 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60783 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60781 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60782 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60779 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60785 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:35|106001: Inbound TCP connection denied from 217.10.43.52/1486 to 72.54.197.26/445 flags SYN on interface OUTSIDE
2|Apr 15 2011 20:49:32|106001: Inbound TCP connection denied from 217.10.43.52/1486 to 72.54.197.26/445 flags SYN on interface OUTSIDE
3|Apr 15 2011 20:48:17|305005: No translation group found for tcp src INSIDE:192.168.72.97/55593 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:48:11|305005: No translation group found for tcp src INSIDE:192.168.72.97/55593 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:48:08|305005: No translation group found for tcp src INSIDE:192.168.72.97/55593 dst OUTSIDE:72.54.197.26/443
THANKS!!
Reply.................................
ok do this:
no static (OUTSIDE,INSIDE) 192.168.72.100 72.54.197.26 netmask 255.255.255.255
clear xlate
access-list Outside-ACL extended permit tcp any host 72.54.197.26 object-group Citrix1494
access-group Outside-ACL in interface OUTSIDE
That should do it for you..
/M_4911140.html
Reply........................
kenboonejr:
Your reverse static needs to be taken out. then you need to do a "clear xlate" command. do that and post your config again and let me see it. I'll be standing by.
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
ASA Version 7.0(8)
hostname 5510
domain-name xxxxx
enable password xxxxx encrypted
passwd xxxxx encrypted
names
dns-guard
interface Ethernet0/0
description Outside interface to Cbeyond
nameif OUTSIDE
security-level 0
ip address 72.54.197.28 255.255.255.248
interface Ethernet0/1
description Inside interface to internal network
nameif INSIDE
security-level 100
ip address 192.168.72.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.71.2 255.255.255.0
management-only
banner exec xxxxx
banner login VPN firewall/router
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring 1 Sun Apr 2:00 last Sun Oct 2:00
dns domain-lookup INSIDE
dns name-server 66.180.96.12
dns name-server 64.180.96.12
object-group service Citrix1494 tcp
port-object eq citrix-ica
port-object eq www
port-object eq https
port-object range 445 447
access-list Outside-ACL extended permit tcp any host 72.54.197.26 object-group C
itrix1494
pager lines 24
logging enable
logging asdm informational
logging mail critical
logging from-address xxxxx
mtu OUTSIDE 1500
mtu INSIDE 1500
mtu management 1500
asdm image disk0:/asdm-508.bin
no asdm history enable
arp timeout 14400
nat-control
global (OUTSIDE) 1 interface
nat (INSIDE) 1 0.0.0.0 0.0.0.0
static (INSIDE,OUTSIDE) 72.54.197.26 192.168.72.100 netmask 255.255.255.255
access-group Outside-ACL in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 72.54.197.25 100
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
username root password xxxxxx encrypted privilege 15
http server enable
http 192.168.71.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.72.0 255.255.255.0 management
telnet 192.168.73.0 255.255.255.0 management
telnet 192.168.71.0 255.255.255.0 management
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.71.3-192.168.71.254 management
dhcpd dns 66.180.96.12 64.180.96.12
dhcpd lease 3600
dhcpd ping_timeout 50
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
smtp-server 66.180.96.57
Cryptochecksum:472013675a200d36e6155c03238fa05c
: end
[OK]
5510#
Was this comment helpful?
Yes No
kenboonejr:
Ok so at this point if you issues a clear xlate command that would have flushed the translation table and citrix should be able to get out with the current configuration. If it can't post the logs for it.. This is the right config for what you want to do.
Was this comment helpful?
Yes No
charlietaylor:
Did that, no connections. Here is what the log says with the config above right after I cle xlate and try to connect from outside.....
6|Apr 21 2011 12:40:44|302014: Teardown TCP connection 8954 for OUTSIDE:74.125.159.105/80 to INSIDE:192.168.72.100/57140 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:40:43|302013: Built outbound TCP connection 9079 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57142 (72.54.197.26/57142)
6|Apr 21 2011 12:40:14|302013: Built outbound TCP connection 8954 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57140 (72.54.197.26/57140)
6|Apr 21 2011 12:40:13|302014: Teardown TCP connection 8618 for OUTSIDE:74.125.159.105/80 to INSIDE:192.168.72.100/57134 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:39:43|302013: Built outbound TCP connection 8618 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57134 (72.54.197.26/57134)
6|Apr 21 2011 12:39:35|302014: Teardown TCP connection 8369 for OUTSIDE:74.125.159.105/80 to INSIDE:192.168.72.100/57129 duration 0:00:30 bytes 0 SYN Timeout
AND....
Citrix server can not even get out to internet, here is the logs say when you try to open a browser.....
6|Apr 21 2011 12:39:05|302013: Built outbound TCP connection 8369 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57129 (72.54.197.26/57129)
6|Apr 21 2011 12:38:55|302014: Teardown TCP connection 8227 for OUTSIDE:74.125.159.99/80 to INSIDE:192.168.72.100/57121 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:38:25|302013: Built outbound TCP connection 8227 for OUTSIDE:74.125.159.99/80 (74.125.159.99/80) to INSIDE:192.168.72.100/57121 (72.54.197.26/57121)
6|Apr 21 2011 12:37:36|302014: Teardown TCP connection 7667 for OUTSIDE:216.52.233.134/443 to INSIDE:192.168.72.100/57108 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:37:32|302014: Teardown TCP connection 7568 for OUTSIDE:74.125.159.99/80 to INSIDE:192.168.72.100/57107 duration 0:00:30 bytes 0 SYN Timeout
Was this comment helpful?
Yes No
kenboonejr:
ok so firewall is showing the rules for the inbound stuff working, but the citrix server is not responding that is why you are getting a SYN timeout.
Does your citrix box have multiple IP addresses or multiple NICs?
What is the default gateway on the citrix box.
I can guarantee you that the config is good.
The logs show sessions getting created - not blocked so its not the firewall causing the problem. Something else is not quite right.
Rank: Sage
Was this comment helpful?
Yes No
kenboonejr:
From the ASA can you ping the real ip address of the citix server?
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
This network is in production. CurrentIy have a cheesy Lynksys router (the only thing it does is NAT for Citrix) and a "Transistion" throwdown firewall with two simple rules that allow all and allow outside to Citrix.
The Citrix has one nic with default gatewway same as all other devices on network (72.2) and goes out just fine until I cut over to 5510. Then is can not get out. (and yes, all other equipment is turned off and the switches are power cycled afer I power up 5510 to make sure I am not having switch arp issues)
The Citrix is in use 24/7 by remote users so I can't switch back and forth. (especialy during day when everybody goes out to Inet via this unit or the cheesy gear I am replacing)
I see the connections too but it connects for half a second and sends 0 bytes..... hmmmm
/M_4911140.htmlRank: Sage
Was this comment helpful?
Yes No
kenboonejr:
you are having arp issues with the citrix box i would think.
so once you cutover to the ASA .. can you ping the citrix box from the ASA?
The citrix arp table still shows the mac address of the linksys 72.2 interface is my guess and you would need to flush the arp table on the citrix server.
Also, how does the internet connect. Is it straight to the linksys router? Is this cable, DSL or T1 to a provider router or what. There is a router on the outside of the ASA of some sort. It could be that that devices still has the mac address of public side MAC address of the citrix box in its ARP table. Most likely that needs a reboot as well to flush its ARP table. I would bet on it.
I have been working on Cisco firewall since before Cisco bought the PIX. I can assure the config is good without that reverse static.
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
OK... but if it is an ARP issue would the 5510 still get the info that it is in the logs?
I mean, if packets were headed to another port why am I seeing SCR/DES info in the logs?
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
AND... I REALLY apperciate all your help!
/M_4911140.htmlRank: Sage
Was this comment helpful?
Yes No
kenboonejr:
you got a point there. Here is what I know. When you try to access it from the outside... the citrix doesn't respond. So could it be at that point the citrix box has the old arp entry for the linksys? so the packets aren't getting back.
So if you cut over. start everything fresh. turn off linksys. reboot ISP router/device. flush arp table on citrix. Then ping the citrix box from the ASA. If that works then try the connection from the outside. How are you connecting to the outside? Are you at a different location or are you on a mobile broadband card or what?
Was this comment helpful?
Yes No
charlietaylor:
I am physically sitting on the network. I am trying access from outside on my broadband card that is known to connect.
Their office is closed tomorrow and I am getting access to come in and powercycle every single device. I will then first try to ping Citrix from ASA and move downstream like you suggest.
Thanks again, I really do hope it is a ARP issue in a device I did not reload. (the ACTELIS ISP box and actual Citrix server)
I will let you know.
Was this comment helpful?
Yes No
charlietaylor:
reboot of every device in the network did not change anything
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
the ASA can ping the citrix server
/M_777876.html
Was this comment helpful?
Yes No
slamjam2000:
From your config, I don't see a route to the inside...
The only route on the ASA is to the outside:
route OUTSIDE 0.0.0.0 0.0.0.0 72.54.197.25 100
Was this comment helpful?
Yes No
charlietaylor:
so what are you suggesting?solved
-
HT201441 i cant find the person who sold this iphone to me, and now i cant activate it
i cant find the person who sold my iphone 5 to me
now i cant activate it because it is still activated to his apple idYou have no options but to find the previous owner. The Activation Lock is an Anti-theft protection that cannot be bypassed, not even Apple. If you cannot find the previous owner, turn it in to the police as it is likely to be stolen property.
-
One more person who can't send mail but can receive
I sent mail last night and woke up this morning not being able to send mail.
I can receive, but can't send. I can send to my self, but can't reply to others or create new.
The email time out message say's the authentication is on. How that changed over night? Not sure.
Under Mail preferences, Account information, outgoing server settings-
I've been using 2525 with no authentication for over a year. I noticed someone suggesting 465 and 587... didn't work.
I went into advanced and saw where it IS asking for authentication (using password) but in the drop down list it doesn't give the word 'none' just like the account option had to select.
I used the connection Doctor and I have connection...
what else can I do?
Thank you for the help
ChelleThe standard TCP-port for SMTP is 25. If this doesn't work, try to authenticate to the SMTP-server with the credentials of your POP3-login. Maybe your ISP reconfigured his SMTP-servers to use aSMTP.
Some other ISP use a method called "SMTP-after-POP3". This means, that you must fetch your mail using POP3 first. After doing this, you have a specific period of time (at most ISPs 5 to 15 minutes) to send mail from the same IP-address as you have POPed before. This is for additional security.
One more reason could be that your configured SMTP-server is simply "dead" or offline for system maintenance. To check if the machine is alive, go to terminal and
ping nameofyourserver
and see if it responds. If so, try connecting on the SMTP port by typing
telnet nameofyourserver 25
These steps can provide additional information to find the cause for your problem. -
Yet another person who can't drag songs into a playlist
I am following the directions to burn a CD. 1. Select new playlist; 2. Name the playlist; 3. Open the music icon; 4. Drag the songs to the new playlist.
When I drag them to the new playlist (it is marked with a music note icon with a blue background) I get a number telling the amount of songs in the list and a circle with a slash though it, I assume meaning "no" since it doesn't work. I've read everything I can find on this and I feel like I must be missing something simple. Please help! Thanks!just a thought but make sure when you make a new playlist its not a "smart" playlist.
-
i can't turn on the phone or even restore the phone completely it will not turn on at all !!
iOS: How to backup - http://support.apple.com/kb/HT1766
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 -
I was able to install and have an icon on my desktop. When i click on it it automatically pops a box up that says: Firefox has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Then it highlights an icon at the bottom to show what the problem is and it is DEP (data execution prevention. I tried a few suggestions there but it didn't work. So it said to see if there is a download version compatable with DEP
See:
* https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it
Maybe you are looking for
-
FireWire Problems Connecting Target MBP to Host MBP
Hey guys, i am having a problem when i try get into target disk mode. I have 2 MBP's , one of them is working flawlessly while the other wont log on to any accounts. I cant get passed a gray screen, i was told to transfer my files from the unbootable
-
NoClassDefFoundError exception
I think I need to reload NWDS on my laptop. I just attended the 2005 CRM Boot Camp and they had us load, unload, reload stuff on our laptops so many times that it doesnt look anything like it did. In order to use my NWDS, I had to pull down J2SE 1.4
-
Anyone with service problems in N Alabama?
Phone locked on me about 15 mins ago and rebooted. It went to no service. I restarted it again and have no 4G service. Called my wife and she is having similar problems. Anyone else having trouble?
-
How to use table name as variable
P.s. I wish to send a tablename through a function as a variable and then want to make a use in sql query. How can I make a use of it. null
-
Lens Correction Feature Not Showing Up
I have Lightroom 5.3 and the Lens Correction feature is not showing up in the Develop module. Any suggestions on how to access this feature? Thanks,