Is there a setting such that the application closes (quits) when the (last) file is closed? Why does the application remain active when there are no files for it open?

I honestly did try to find my own answer, but cannot. Not sure why a simple question would have its answer so difficult to find. I'd just like the application to simply close after the last file is closed. It seems strange to have the application remain active. Thanks for your help.

It's also a bit strange that even though I searched throughout the community for questions like this......so that I wouldn't take up space for something already discussed........that immediately after I posted my question, the "
More Like This" side window comes up that describes questions just like mine.
So, sorry to have bothered anyone with having to read another duplicate question. I see that the answer to my first question is "No", and there's likely not a good answer for "Why".
Thanks anyway.

Similar Messages

HT3529 when i send a text/imessge why does the person recieving it see my email address instead of my name?

when i send a text/imessage why does the person receiving it see my email address instead of my name??

iMessage requires both parties be using iOS 5. The iPhone 3 can not be upgraded to iOS 5, thus messages would be sent as an SMS (Text message)
Stedman

When I send a group email why does the address bar not present the names alphabetically?

I frequently send emails to groups. Sometimes, for one reason or another, I want to delete one or more contacts from the list that appears in the address bar. Why does the list not appear in alphabetical order and is there any way that I can edit my contact lists to make it do so? It means picking through a list one by one rather than scrolling down a list to find a contact in the correct order.

Basically I suggest you keep using Eudora.
Like most of those moving now, they are unlikely to be happy with anything else. But then that is to be expected, you have clung to abondonware for 5+ years after it's replacement. People that dedicated are unlikely to be happy with anything else.
The Business standard and professionalism are not based on the Eudora way of things. I suggest you stick undisclosed-recipients: into a google search box and get instructions on how to do things for all the major mail clients.
Of note Thunderbird displays nothing in the To field, even though the undisclosed-recipients: is inserted in the outgoing mail.
<blockquote>
I have tried using Bcc, and indeed, the recipients are suppressed, but not as a group. I have to change every recipient address from To: to Bcc: manually.
</blockquote>
Perhaps if you use the buttons at the bottom of the contact pane to add the list to BCC you would not have to manually change anything. See https://support.mozilla.org/en-US/kb/addressing-email#w_selecting-the-entries-from-the-contact-pane
I am interested however how when you added a list so it appears on multiple lines. All I see is he list name until after I press the send button and look at it in the sent folder.
Most people use another address entirely in the to:, in conjunction with the BCC list. It verifies the list mail is sent by coming back and you can put whatever you like in the display name of the email address.

When I turn my ipod on why does the screen stay blank and then turn itself off?

When I turn my ipod on the normal start up screen appears with the apple logo in the middle, but then after a few seconds the screen goes blank and it turns itself off. It was working fine the other day. I even charged it overnight to make sure that it wasnt because it was out of battery. I dont know what to do, it has over 600 songs on it and around 300 photos, I know that the memory isnt full because I checked the other day and it said I had around 1GB left. I cant do anything on at all because the screen just goes blank and then turns itself off. Please help, thank you

Well, I strongly suspect that a gig isn't quite enough "extra" storage to allow operation.
However, first, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

When building an iPad HTML5 app, why does the splash page not work correctly in landscape mode?

I have recently completed an HTML5 web app for the ipad and one of the most challenging things about the process was getting the splash screen to work.
I have now succesfully completed the job and the splash screen works, but only under the bizarre condition that the app is first launched in portrait mode. This seems pretty crazy as most people using the ipad for browsing do so in landscape mode.
Has anyone come across this problem and resolved it?
cheers

yes, bare in mind this is an HTML5 Web App and not a native app. so yes I have included code for both landscape and portrait modes.
I install the web app and open in portrait, it works. then close and open in landscape, it works.
if i install the app and open in landscape FIRST... then no splash screen ever works.
This isn't just my problem. I've read about in several forums over the past few days while investigating.
thanks

Why does the Apple mouse drain so quickly?

I'm not sure if this question is in the right place. I bought a iMac back in January and I've been changing the batteries like every few weeks. My question is why does the mouse drain so quickly?
The batteries in the keyboard have been in there since I got the computer. I think I should buy a wired mouse and just plug it into the back of the iMac. I'm getting sick and tired of having to change the batteries so often.

Hello:
Battery drain is a function of how much the device is used (no surprise to you). I find that my mouse batteries last less - probably because I type so slowly, I use the mouse for anything I can.
Let me give you a suggestion based on my own experience.
I use rechargeable batteries and a 15 minute battery charger. I currently have a drawer full of Energizer 2450 mAh rechargeable batteries and an Energizer 15 minute charger (works for AA and AAA batteries). Rechargeables last less time than Lithium batteries - I think the reason is different voltages (1.2 vs 1.5). I obtained all of the batteries and the charger - new - on eBay at a very reasonable price.
By using rechargeables, you are never without a fresh battery more than 15 minutes, and you are environmentally friendly to boot!
Barry

Why does my application give SerializationException although I have no serialized classes?

I have created an application deployment tool for BizTalk, and it references and uses Microsoft.BizTalk.ExplorerOM apis to start, stop and manage a BizTalk application. Now when I run the tool, it gives following exception-
Unhandled Exception: System.Runtime.Serialization.SerializationException: Type 'Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer' in Assembly 'Microsoft.BizTalk.ExplorerOM, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' is not marked as serializable.
None of my classes are defined to be serializable. And the tool is created in WPF. Any idea how I might resolve this?

Hi,
I think the user has got this resolved at stackoverflow already.
Why does my application give SerializationException although I have no serialized classes?
Resolution: He was creating the instance of BtsCatalogExplorer through reflection, using connection
string instead solves the issue.
Rachit
Please mark as answer or vote as helpful if my reply does

Ever since I upgraded to IOS 7 on my iPad, it does not remember my passwords, even though I check "keep me signed on". Is there a setting somewhere that I am missing? I did not have this issue with the previous OS. Thank you.

Ever since I upgraded to IOS 7 on my iPad2, it does not remember my passwords, even though I check "keep me signed on". Is there a setting somewhere that I am missing? I did not have this issue with the previous OS. Thank you.

Thank you, James, but I do have a WiFi connection on the iPad mini. The Numbers files update on my iPad third generation and iPhone just fine when connected to the same network.
Do you have any other suggestions?
Thank you!

Is there a way / app that would allow me to access my jetpack's web ui remotely from the WAN side ?

Is there a way / app that would allow me to access my jetpack's web ui remotely from the WAN side ?

netdestroy, that's a great question. I apologize that currently, we don't support any applications that allow this capability.
LasinaH_VZW
Follow us on Twitter @VZWSupport

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Oh, PLEASE IGNORE the line:
deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
That was left there inadvertedly. Can't seem to find the edit button here...

Why does the Ni-Motion Torque-Control Program give me such an oscillation???

Hello,
I really hope to find somee help here...I have a UMI-7744 and I would like to do force control for a servo motor. I have tried the NI-Motion example "Torque Cntrl Using Monitoring Force"...it seems to be quite easy - it constantly measures the current force and compares the ADC-values with the target force. The difference between the two is then new relativ position...
When I test it with an actuator that does not touch the workpiece (current force==>0N) and then tell it to apply 50N (ADC-value of ~1000) then of course it starts moving towards the workpiece, but then overshoots quite significantly when it touches it, then undershoots, then overshoots, then undershoots....etc....
(1) Apart from the big overshoot, I would have assumed that the failure decreases over time and the force will be maintained at some point, but the actuator keeps on oscilating around the target force with quite high amplitudes.......does any body have an idea for the reason?????....How is it possible that the controller actually approaches the target force, ie. the over/undershoot should get smaller with every cycle...
(2) I was assuming that the problem is because I load quite large relative positions (1000 - 0 = 1000) while the actuator is not yet in contact with the workpiece which then causes the overshoot when the actuator touches the workpiece. Hence, I tried limiting the relative positions to +/- 100, but it seems that it does not improve anything. The actuator still never maintains a steady force.Any idea, why limiting the relative positions does not have an effect on the oscillation??
(3) I have seen that the use a delay of 50ms. Hence every 50ms a new target position is loaded. Is there any experience of what the BEST time delay is for motion control???? Is it better to decrease the delay to adjust the relative position more often OR would this have negative effects because the moves don;t have enough time to complete??????
I am grateful for any reply...

Hi Jochen,
thanks for the clarification on the pros and cons of the two Torque control approaches...very enlightening......
To clarify my previous question: I am using the S200VTS-Servo Drive from Danaher Motion. The drive is able to run in Torque-mode, Velocity-mode and Position-mode. In the latter case it needs a "step and direction" input, instead of an analog input. My idea was to setup the S200-drive in Position-mode because in the "Torque Control using monitoring Force"-example the inner PID loop is for the position...so I thought, why shall I setup the S200-drive in torque mode, when actually the PID-loop tries to control the Position.....you know what I mean? It appeared to me, that with setting up the drive in torque mode and running the example code with the positional PID-loop I am mixing force and position....
Kind regards and thanks a lot for your efforts.
Well, let's take it like that: The second approach is ok, if the dynamics of the torque are very low. The worst case scenario for this approach is a solid actuator pressing against a solid workpiece. When these two pieces meet, a force occurrs almost instantaneously. That means, that very short move distances result in high force differences. With your current approach this means that it's very hard to control the force, as in fact the only way to generate force is to move the axis a bit. If you control the force directly instead (analog feedback), you will get a much better control behavior.
To clarify the idea behind that:
Just think of two metal plates lying on each other on the floor. Now you step on the upper metal plate. Does the upper metal plate move? No. Is there a change of the force applied to the lower plate? Yes.
To summarize: 'Torque Control using monitoring force' works best in systems with very low dynamics and a soft contact between actuator and workpiece. still all the limitations that I have mentioned in my first post are true, so I strongly recommend to use analog force feedback.
Your last statement about running the motor in position or torque mode is not clear to me. Are you referring to operation modes of your drive (by the way, which drive are you using?). In this case the clear recommendation is to configure your drive always in torque mode, regardless of the type of control provided by the 73xx device that you are using. From a drive's point of view 'torque mode' means, that the analog input voltage (command input) is converted into a proportional current signal and that's in both modes the best option.
Jochen

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

HT203167 Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??

Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??
Then a few minutes later, it goes back to expanded again, it is driving me crazy. how can I stop this????
Thanks for any help.

There could be a number of reasons, first thing to check is if you are clicking Command + or Command -. The Command 0 keystrokes restore Safari to the actual size. You can also reset Safari by Safari - Reset.

Why does the "downloading the latest applications" bar continually appearafter upgrading to Firefox 3.6.8?

Why does the "downloading the latest applications bar" continue to appear after upgrading to 3.6.8?
== This happened ==
Every time Firefox opened

See:
http://support.mozilla.com/en-US/forum/1/732258?s=downloading+latest+application&as=s
http://support.mozilla.com/en-US/forum/1/737414?s=downloading+latest+application&as=s
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. ~~red:1.5.0_06 (very, very old)~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Is there a setting such that the application closes (quits) when the (last) file is closed? Why does the application remain active when there are no files for it open?

Similar Messages

Maybe you are looking for