Is there a simulator for E-Series Cards?

Hi Folks,
I developed an application that uses an E-Series card. To make any updates, I need to connect remotely to the system that has the card. I'd like to try several programming techniques in a controlled environment first, then move the program to the actual system, so I need to be able to simulate the E-Series card.
Thanks,
Mike

Mike,
Below are the links to a couple of tutorials concerning RDA:
Networking Two PCs for Remote Data Acquisition
Developing Networked Data Acquisition Systems with NI-DAQ
Spencer S.

Similar Messages

Is there a simulator for the USB-6009?

Is there a simulator for the USB-6009 that I can download and install? I installed the disc that came with the board, however, no simulator.
Thanks,
Chris

Hi
You could simulate diferent device in Measurent and Automation Explorer (MAX) but I don't see there your modul USB-9009.
There are odere module, but not this module.
Regards
bogdani
Polish LabVIEW Center - www.labview.pl

In the Apps "Pages" is there a tutorial for the Business Cards Templet?

In the Apps "Pages" is there a tutorial for the Business Card Templet?

Peter I see you are humble, as my self. I don't see a way to easily fill all the individual cards on the templet. Pages '09 version 4.1 (923)
I first started using Business Card Templets with Microsoft Publisher back in 2000. Initially I filled out a business card and was given a choice to print 8 or 10 cards to a page. Since then I have been out of the loop due to illness, Pages '09 give me the choice to print 8 and 10 cards to a page but I'm missing the initial step. laughing about it but confused too

MSI 76.45 driver update for 6 series cards?

After checking the MSI site for updated drivers, it looks like the 7645's are the latest for the 6 series cards. Yet, in the readme file under compatible cards for this driver version, there are no 6 series cards listed. What's up with that?
I was just wondering if MSI has something wrong here. Is this, in fact, the latest driver for the 6600GT??
(My apologies if this subject was already covered)

Clark,
Just go to nVidia for your nVidia Drivers
Depending on who wrote the readme file, you're right, there could be something wrong, and it's just a readme. Nvidia usually claims all drivers are backwards compatable, however, as you may know, nVidia's drivers correspond with the genre of card currently on the market, ie GF4=4X.XX GF5 (FX)=5X.XX GF6=6X.XX and so on, so nVidia currently focuses on optimizations for the current card on the market and sometimes support suffers for older cards. Having said ALL that, more times than I care to count, MSI seems behind the times, this is the norm, as documentation and consistency is not a strong point on any the website, hence my recommendation to go directly to nVidia. If it is the latest and greatest from MSI that you want becasue of the DOT feature, then I believe that is the latest from MSI.
Now I'm wondering how you are looking for drivers. Are you looking for drivers via the MSI Live Update Utility, or on the Taiwan website? In any case whatever is there from MSI is there. It you want the latest and greatest then you can take your chances and start expirimenting with the latest from nVidia ftp://download.nvidia.com/windows The whole shebang is there for your convenience.
Finally, if everything is working fine, then there should be no reason to update. Recomendations to keep your system loaded with all the latest drivers is not always the best advice...
Does that help?

Analog start trigger for x series card gives an error?

Hi everyone,
I am having some trouble setting up an analog start trigger for DAQ using an x series PCIe card (6351)... Attached is my configuration... After reading the manual (http://digital.ni.com/manuals.nsf/websearch/08B4B2E1B5373B94862579BA006E6BAB), my understanding is that AFPI0 is a compatable analog trigger for the device; however, the vi will not run and I get an error... Although if I change the soruce to "Force" (which is ai0) it works..
Also, the device document says (pg 11-8):
"To improve trigger accuracy, do the following:
• Use an AI channel (with a small input range) instead of APFI <0,1> as your trigger source. The DAQ device does not amplify the APFI <0, 1> signals. When using an AI channel, the NI-PGIA amplifies the AI channel signal before driving the analog trigger circuitry. If you configure the AI channel to have a small input range,"
To me, this implies that I probably should use "Force" as the trigger soruce anyway (note that the instrunment is used to acquire data load cell data generated from human muscle contractions; so slew rates are relatively low compared to signals acquired from industrial tests).
Could someone please comment on these issues for me?
Regards,
Jack
LV2010
Attachments:
Untitled 1.vi ‏22 KB

Ok... I think I have answered by own question... APFI0 needs a low impedence signal to drive the terminal... I mistakenly thought this was an internal terminal or trigger...
So I should stick with using the first analog signal acquired in my DAQ device (e.g. ai0) as the trigger source?
Regards,
Jack
LV2010

Are there power settings for the aiport card (wifi)?

Just wondering if there are any type of power saving features i can enable on the macbook for wifi.
i ask this because i notice that my azereus bit torrent client seems to stop downloading my torrents each time my screen saver goes on.
thanks

There are none specific to the wireless card. You could try turning off the screensaver and just set the machine to turn off the display after a few minutes.

Is there and app for receiving credit card payments?

so i could type in the CC # and doesn't need the actual card?

BAR files are apps you can install (side load) to your BB10 device. BAR files are converted (usually by others) from those native to Android and iOS.
DDPB is a PC app that can be used to perform the side-loading process of the BAR file app to your BB10 device.
So, if someone somewhere (you must search the Internet) has created already a BAR file for this Cielo app you want (which you say already exists for Android and iOS), then you can download that BAR file to your PC, install DDPB to your PC, and then use DDPB to install the app (using the BAR file) to your BB10 device.
The process is called side loading. If a developer has not written their app for BB10, then you can still side load it if the above conditions are met (someone has created a BAR file already for the app).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Replacement for K-Series Card Reader?

Hi - my K230 card reader seems to have kicked the bucket. The light comes on when a card is plugged in, but most of the time nothing shows up under "computer" in windows explorer. On the rare occasion the drive does appear, when clicked on it says I need to "insert a disk into Removable Drive ..."
So, I'm thinking a quick switchout shouldn't be a big deal, but I can't find the part I need. The Hardware Replacement Manual shows the card reader, but doesn't discuss replacing it. A web search isn't returning anything.
Has anyone done this? Does anyone know the part number or where to buy one? Thanks.
K230, Windows 7 64bit

You may try contacting the lenovo service center and you will get the part easily.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

WSN Simulator for LabVIEW

Hello everyone! May be it's a very stupid question, but I'm new in WSN, so, please, forgive me for it.
Is there any simulator for WSN (like, e.g., TOSSIM) that can be used with LabVIEW? I mean, without any hardware.Simulator which allow to debug, test, and analyze LabVIEW programs in a controlled environment and provide abstractions of certain real-world phenomena.
Thanks&Regards.

There is no built in simulator available but you could build your own with shared variables with the same names as the WSN Node Variables.
Essentially you would change the shared variables in your program to point to your test varialbes. Then you can have a "Simulator VI" which runs and manipulates the variables in your testing patterns.
Have a good day.
Alex D
Applications Engineer
National Instruments

Are there any DAQmx examples available for use with pci 6229 M series card?

I have been searching around for examples which work with the pci 6229 M series DAQ card. Most examples do not list this card as applicable and the one I have found gives an error. Is there anywhere specifically available, what I am particularly interested in is seeing an analogue channel being triggered by another analogue channel reaching a certain value.
Thanks
Kevin

Hi Kejoglo,
You are right in the fact that the M-Series card is newer than LabVIEW (and therefore the examples that are shipped with it) and therefore the example finder doesn't list the M-Series cards in the list of available hardware.
Basically though, the M-Series cards work with DAQmx and not Traditional DAQ so if you just go into the example finder and search under Hardware Input and Output>>DAQmx and choose an example from that folder to run on your M-Series card. As long as you don't try to do anything outside of the specifications of your card (which I doubt you will do) then you shouldn't have any trouble running any of the DAQmx examples on an M-Series card.
Hope this helps, if you still have problems then please feel free to write back.
Best regards,
Peter H
Applications Engineer
National Instruments UK

I Bought lightroom 5 online and for lizensation my seriesnummer is named as Aktiualisierungsnummer and i was asked for a series number of a previous version. I never had one, when I bought the lr5 version there was no comment about having a previous vers

I bought lightroom 5 online and for licensation my seriesnummer was named as Aktiualisierungsnummer and i was asked for a series number of a previous version. I never had one, when I bought the lr5 version there was no comment about having a previous version. How can I get my version licensed

Babowa
Thank you for your prompt reply. I have bought 1 MacbookPor 17, 1 Macbook air, 1 MacbookPro 15 , 2 ipads, 3 iphones, and this iMac27 and 2 of iMAC24 or 20 not sure   but I do not recall ever doing what you are telling me in your reply.   When you get a extended car warranty, you don't   sign up for it.. it is just there and is included in the sale.   You don't buy this warranty to use it.. You buy it, in case something happens.   Here a perfect iMAC with minimum 100 hour useage has a dead drive. That is not normal and I should not have to even be requesting anything since most MFG offer a 3-5 year warranty on their disc drives and I believe that is probably passed on to Apple regardless if an extended warranty is purchased or not.   Customer service dictates a more flexible approach to make sure the lifetime value of a customer is not lost due to some misunderstanding.
I was in the MacStore that I purchased the unit..and they found and pulled the invoice and confirmed
the purchase of it in front of me. I had paid with credit card and fortunately it was there in their system.   I do not also recall recieving any box or paper although most everything I ever get remains sealed.. I am not in the habit of opening anything since I have never encountered any serious issues before.
   I have used my Macbookpro warranty 1 time and that is all throughout the years I have been investing in Apple equipment.
I just recieved a letter from the store asking me to get the paper to them so they can register it... I don't recall getting any paper actually. But I do have several boxes sealed here.. On this iMAC27, it was a hurry up and get it done thing and I don't remember taking anything extra with it.   Regardless, my request does not seem unreasonable.
Thank you

Simulator for java card

hi
i am new to java card technology...i am writing the applets in netbeans using java card plugin....the problem is i m not able to simulate the applet..it is showing build successfully, but wen i run the app it is showing nothing.....so can anyone suggest me a suitable simulator for the same....

Hi,
I assume you are after details on how to use the simulators? There are examples and documentation with the JC specifications and developer kit. Both of these are available from the Sun website [http://java.sun.com/javacard/].
If you are after details on how to develop your own, the JC specifications outline the requirements for the JCRE and JCVM that you can use to implement a simulator.
Cheers,
Shane

Im trying to purchase music and it says i have $21.07 on my itunes account but when i go to purchase music it asks for my credit card details or a gift card no. and wont let me continue til i do so. how do i spend the money i have on there already?

im trying to purchase music and it says i have $21.07 on my itunes account but when i go to purchase music it asks for my credit card details or a gift card no. and wont let me continue til i do so. how do i spend the money i have on there already?
i try to download the song and it comes up with put in password. then it takes me to a credit card detail place. i have enough money on my account i shouldn't have to use my credit card. how can i use the money alredy on my account?

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

Can't install drivers for sound blaster live Telling me there isn't a sound blaster card install

I am doing a fresh install of xp on a machine. This machine had no hardware issues before I formated the dri've and re-installed windows xp.
Everytime I go to install the drivers for the sound card I get an error message telling me that setup cannot find a sound blaster card installed on the system?
I even pulled a known working li've card from the machine I have downstairs. Put the card in and started up the machine. The driver pack is still telling me there is no card installed. I've tried three different pci slots as well.
I even went as far as re-installing windows xp without service pack 2 integrated and even that didn't help!!!
Is there some kind of fix that I am missing?

the unipack download from creative will not work. first, try asking around if somebody else has the same 5. creative card as yours. the only solution for your problem is to use the installation cd that came with your creative card. I lost mine so i went to a pc repair shop and inquired if they have a copy of such cd - they normally do.
. you need to remove all the programs concerning creative from add remove programs. 2. shut down, and remove the sound card. 3. turn the pc on and let windows boot normally. install the the softwares and drivers using the cd that came with the box. 4. shut down and install the sound card 5. turn on the pc. windows will find a new hardware and will find the right drivers bec you have previously installed them. There is absolutely no need to reformat your hard dri've.

Is there a simulator for E-Series Cards?

Similar Messages

Maybe you are looking for