Is there a single sever supports both Jdev11 and Froms/Reports to deploy

is there a single server to support both jdeveloper 11 and forms/reports to deploy on web.
We currently have ias 10.1.2, deployed 10g forms/reports on web. we are developing new module in jdeveloper11. Can some one guide us, best way to integrate both? (we also have to implement ldap/sso soon for secuirty reasons)
Thanks
Lalitha

Thanks for the reply.
We have currently IAS 10.1.2 with forms/reports on sun machine.
We also have brand new sum machine for other reasons. Now if we choose to use this new machine to deploy only new module which we developed in Jdev11, what would be the best steps we can take and eventually migrate/transfer old forms/reports modules to new machine.. can you please give your advice?
Thanks
Lalitha

Similar Messages

  • Mini DisplayPort to support both audio and video coming soon?

    So I notice that Apple updated the MacBook Pro Mini DisplayPort implementation to support BOTH audio AND video.
    Think this will make it’s way to the Mac mini soon, or an update still a long way off?

    Probably in the next refresh, but the mini was refreshed twice last year, so another refresh in less than a year would probably be too much for which to hope!
    There is always this US$49 wonder;
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2
    Dah•veed

  • Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    The mini dvi on the MacBook will only support video, in order to get audio you'll need to a cable from the sound out port to the sound in port on the TV.

  • Page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?

    page size that I have to put my site to see the same on a computer supports both laptop and a desktop computer ?

    The viewport on a computer is adjustable by the user. iWeb sets the viewport width to the page width that you chose in the layout menu. No matter what the end user does, the page width is static and a reasonable compromise for the width of a web page that will be viewed on these devices is 980 to 1024 px.
    Safari on iOS devices cannot set the viewport. The viewport on mobile devices is fixed and its width depends on the orientation of the device. The iPhone in portrait mode has a viewport width of 320px. This means that the 980px wide iWeb built page will be squashed down to about one third of its desired size making it unreadable and difficult to navigate.
    Setting the viewport meta tag so that width equals the device width is a futile gesture since Safari on iOS will do that anyway. Its only useful if you add some initial scaling like...
    <meta name = "viewport" content="initial-scale=0.7">
    In the case of a 980px wide website, the initial scale is about 0.3 so any value higher than this will magnify the initial view of the site.
    Here's an example of a 980px wide page that has been given and initial scale of 0.7 which allows an iPhone user to see one column of a two column layout...

  • Is there any system level support for RAW files from an Olympus XZ-10 camera.  I use Lion and iPhoto version 9.4.2

    Is there any system level support for RAW files from an Olympus XZ-10 camera.  I use Lion and iPhoto version 9.4.2

    If there is I can not find it - Google provides a list of possible methods form Adobe and others
    LN

  • [svn:osmf:] 15252: 1) SMILPlugin - SMILMediaGenerator class modified to support both live and vod smil files .

    Revision: 15252
    Revision: 15252
    Author:   [email protected]
    Date:     2010-04-06 16:57:34 -0700 (Tue, 06 Apr 2010)
    Log Message:
    1) SMILPlugin - SMILMediaGenerator class modified to support both live and vod smil files. SMILLoader modified to retain original resource metadata.
    2) AkamaiBasicStreamingPlugin refactored. This includes improved support for all types of streams while the plugin is loaded, added support for plugin metadata that can override built in defaults for a) live stream time out; b) whether or not the plugin should try to reconnect to a live stream if both primary and secondary encoders fail; c) the interval at which the retry should occur.  Added support for resource metadata for specifying connect-level and stream-level auth tokens so that these tokens do not need to be part of the URL (although this is acceptable also).
    3) AkamaiPluginSample app updated to support auth tokens which are not part of the URL (these are passed to the Akamai plugin via resource metadata).
    Modified Paths:
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
        osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
        osmf/trunk/plugins/SMILPlugin/org/osmf/smil/loader/SMILLoader.as
        osmf/trunk/plugins/SMILPlugin/org/osmf/smil/media/SMILMediaGenerator.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/.actionScriptProperties
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/AkamaiBasicStreamingPlugin.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/AkamaiBasicStreaming PluginInfo.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ion.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetConnect ionFactory.as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetLoader. as
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/net/AkamaiNetStream. as
    Removed Paths:
        osmf/trunk/plugins/akamai/AkamaiBasicStreamingPlugin/com/akamai/osmf/events/

  • Cisco IOS supporting both voice and vpn

    Hi Friends
    i have one 2821 router.Can any one suggesting which ios will support both voice and vpn?

    Questions like this are better/faster answered by checking feature navigator.
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    My suggestion is to run an MD release.
    Also a big dated document:
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_tech_note09186a00800fb9d9.shtml
    For old software and hardware you can also check out Figure 1 here:
    http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_bulletin_c25_506007.html
    M.

  • Which handheld devices support both J2ME and Wi-Fi?

    Which handheld devices support both J2ME and Wi-Fi?

    Hi,
    Got the Lumia CYan update yesterday hoping that it would fix my bluetooth problem. I have Cortana on my Hong Kong country variant but still bluetooth issue is not resolved.
    After pairing instance, the bluetooth does not re-connect on subsequent attempts (it does try to reconnect). On reconnect attempt it fails and presents "tap to pair" under the bluetooth network.
    Please help.
    Daman
    Lumia 1520
    Past: Icon, 928, 720, N9, N97(ugh)

  • How do you change categories in both transactions and budget report in the personal budget template in Numbers?

    How do you change categories in both transactions and budget report in the personal budget template in Numbers?
    I am working on both an iPad mini and a MacBook Air. 
    Whenever I change the category name in the budget report, it does not actually show up in the transactions tab when I am using the Personal Budget Template. 
    I have already tried copying and pasting a category in the budget report to add another row but it still does not show up in the transactions tab. 

    Hi golmeda,
    Check out this answer here:
    Using Numbers Personal Budget template I can't figure out how to change the categories in both tabs (budget and transact…
    If it is unclear let me know.
    quinn

  • Any GPUs for Windows that support both CUDA and Open CL?

    Hi everyone,
    I was looking at this list:  http://www.adobe.com/products/premiere/tech-specs.html
    while trying to decide which graphics card to buy to take advantage of Mercury playback.  I couldn't help but notice that there is not a single card listed that is compatible for both CUDA and Open CL in windows.  Do I really have to pick one or the other?  In that case, which would be more beneficial to a Premiere Pro workflow that utilizes a lot of dynamic links to After Effects?  As a side note, I use Photoshop a ton, and would love to keep my GPU acceleration in that arena as well.
    Thanks!
    -Charlie

    I believe they write OpenCL separately.  They're two different APIs.
    They are not that different, while 'porting' doesn't imply completely automatic process. Rewriting existing libraries from one language to another is something almost any developer is familiar with.
    I'm not sure I understand the point you're trying to make here.  Right now, you cannot use OpenCL processing with an nVidia card on Windows.
    The point is simple: both CUDA and OpenCL are supported by NVIDIA cards. The fact that Adobe engineers haven't ported libraries for GPU acceleration in MPE on Windows from CUDA to OpenCL so far doesn't mean they never will. Hence the statement that a user-side choice between AMD and NVIDIA equals to choice between OpenCL and CUDA is incorrect.

  • Is Cleartype able to support both RGB and BGR sub pixel panel displays at the same time?

    Hi,
    I am using 2 27' LED displays on my PC. One has RGB sub pixel, the other has BGR sub pixel.
    I have problem to tune the font using Cleartype. I have tried to tune all displays a few times and always get the following result.
    If I use the RGB one as the primary display, the font on the RGB display looks ok but the font on the BGR display looks weird after tuning using cleartype.
    If I use the BGR display as the primary, the font on the BGR display looks ok but the font on the RGB display looks weird after tuning using cleartype.
    Basicly, the after tuning with Cleartype, the font on the Primary display looks good but on the other looks weird.
    I have also tested with single display setup. i.e. connect only the RGB sub pixel display or the
    BGR sub pixel display.
    ClearType tuning works well for single display setup no matter which display I have connected.
    But once I connect the 2nd display and tune using Cleartype, the font on the Primary display looks good but on the other looks weird. (The same as above)
    To be more specific, the RGB display is Philips 278C4 (connect using HDMI), the BGR display is Dell P2714H (connect using DisplayPort. I have also tried DVI. DisplayPort or DVI give same result).
    My system is Win 8.1 Pro x64 JA-JP with all latest patches installed, and my graphic card is nVidia GTX 760, with the latest driver installed.
    I suspect this is due to one display has RGB sub pixel panel, and the other has BGR sub pixel panel, which means
    Windows ClearType need to take care both RGB and BGR for at the same time. I am not sure if this is fully supported by Windows 8.1 ClearType.
    Is there any solution or workaround to make the font on both displays looks nice?
    Thanks.

    Hi,
    Windows includes several technologies to render text on the screen. These include Windows GDI, Direct Write and Windows Presentation Foundation.
    Windows GDI is limited to using one set of ClearType settings per system
    while the other two support different settings per display.
    It depends. Most LCD screens have a RGB striping order. A very small number have a striping order of BGR.
    For more question, refer to this link:
    ClearType FAQ
    http://www.microsoft.com/typography/ClearTypeFAQ.mspx
    Kate Li
    TechNet Community Support

  • TableCellEditor that Supports Both Date and Calendar

    Hi,
    I'm trying to write a TableCellEditor that supports both the Date and Calendar Classes (i.e., my table could have either Dates or Calendar objects, and I want this cell editor to work seamlessly with either one).
    Here is a simplified version of my code:
    public class DateCellEditor extends AbstractCellEditor implements TableCellEditor {
    /** The editor component. */
    private DateChooser editor;
    private Calendar cal;
    public DateCellEditor() {
    super();
    editor = new DateChooser();
    cal = Calendar.getInstance();
    public Object getCellEditorValue() {
    cal.setTime(editor.getDateValue());
    return cal;
    public Component getTableCellEditorComponent (JTable table,
                                                                                                                            Object value,
                                                                                                                            boolean isSelected,
                                                                                                                            int row,
                                                                                                                            int column) {
    if (value != null) {
    if (value instanceof Calendar)
         editor.setDateValue(((Calendar)value).getTime());
         else if (value instanceof Date)
         editor.setDateValue((Date)value);
    return editor;
    As you can see, I've already modified getTableCellEditorComponent to accepted object of class Date or Calendar. My problem arises in the getCellEditorValue method. How do I know which type of object to return? In the code sample above, I'm returning a Calendar object, but I'm not sure how to code this method to return either Calendar OR Date.
    By the way, editor.getDateValue() returns a Date object.
    I could easily write two separate TableCellEditors, but I would prefer a more elegant solution. Any ideas?
    Thanks!
    Karen Prengaman

    If you really must have both objects and don't want to convert one into another, you could add a function like
    setMode(int modetype) {}
    where modetype is either DATE or CALENDAR, and then return the set type when the user calls getValueAt

  • Will there be future database support of mySQL and php 5.5 on the dreamweaver CC?

    Will there be future support of mySQL and php 5.5 on the dreamweaver CC? I have seen various topics on this, and havent seen any answers on this as of yet. I feel it is very important to have this available, and not from some external company as an addon or something. I come from cs6 products, and am debating whether or not I should even join the creative cloud, or participate any further with Adobe products.
    I have been a fan of Adobe for quite some time. However, if there isn't going to be any database tools within DW, I may decide to pass on the CC and comepletely hand code it all from now on.
    Has anyone found yes or no answer to this yet? I am assuming there is no news yet, as the adobe posts I have read have no additional info other than they haven't updated the tools, thus removing them from CC.

    Mikaroni wrote:
    Will there be future support of mySQL and php 5.5 on the dreamweaver CC? I have seen various topics on this, and havent seen any answers on this as of yet. I feel it is very important to have this available, and not from some external company as an addon or something. I come from cs6 products, and am debating whether or not I should even join the creative cloud, or participate any further with Adobe products.
    I have been a fan of Adobe for quite some time. However, if there isn't going to be any database tools within DW, I may decide to pass on the CC and comepletely hand code it all from now on.
    Has anyone found yes or no answer to this yet? I am assuming there is no news yet, as the adobe posts I have read have no additional info other than they haven't updated the tools, thus removing them from CC.
    I very much doubt that any future addition of DW will include any 'official' support for mySql database interactivity. CC hide the server behaviours this time around in an extention to be activated by the individual, its still available in CC but at the users own disgression, mySql is dead. You should be connecting and querying your databases using other methods like mySqli. Adobe have seen it fit to go in other directions and dispite the outcry of dropping the server behaviours there has been a deafening silence from Adobe. From that you can take it they think it is no longer an important part of their software package.
    Mikaroni wrote:
    I have been a fan of Adobe for quite some time. However, if there isn't going to be any database tools within DW, I may decide to pass on the CC and comepletely hand code it all from now on.
    I have not updated to CC because it contains zero that would be of importance to my workflow. The more experienced a code writer you are the less DW has to offer. Any serious code writer would not miss DW if it went out of business. Fireworks is more important to me which LOL is going out of business...go figure. I think the Adone execs are screwed up snorting cocaine or something. I'm not really even sure why I use DW, maybe out of habit.
    Certainly hand coding for database connectivity and querying is the ONLY way to go if you are not interested in third party extentions because continuing to use the current available server behaviours is a backwards step. I don't know how good these third party extentions are because there has never been a lot of talk about them around here which leads me to believe not many are considering them, maybe.

  • Creation of a Single button for both Update and Insert

    Hi,
    I want to create a button which performs both Insert and Update function. As of now i have 2 seperate buttons. Can I combine them in to one by writing a procedure which checks for the data in the database...If the record exists, then it should update the record, if not it should insert...Please guide me
    Regards,
    Pa

    Hi,
    If I am inserting in to the table a new record, how do I check for that column in the table...
    It should work this way..
    I have a list of users in a page, if I click on any user name, it will redirect me to another screen which will allow me to create a record for the selected user name. I want to check the selected user name in the table. If it is already existing then need to update, else insert.
    Regards,
    Pa

  • Same Query for both Main and Sub Report

    I have a report whichs works but I don't think i'm getting the data to both the Main Report and Sub Report in the most effcient manner...  I have a report that totals users call subject counts.  But then end user wishes to see all users total counts and the grand totals of call counts on the first page then then the breakdown of types of calls on subsuquent pages...  so I created a report with a subreport in the report header....  I use the same query in both the sub and main report... however it asks the user to enter the parameters once for the main report and once for the sub report... Parameters are both the same for each; month and year...  so it currently runs the query twice I want to run it once and use the data for both reports...  I group by name and then sum the call subject counts for the user totals... and in the sub report I hide the detail section and I'm just left with the sub total line for each user, then in the main report use the same grouping and suming again and I start a new page for every user... 
    Using CR 9
    Thanks for any advice
    Vincent

    i think you need to link the main report parameter with the subreport parameters inorder to pass the parameter values from main report to subreport. So right click on subreport and go to change subreport links and add parameter fields and select parameter fields from your subreport and un check the databse fields in subreport.
    Regards,
    Raghavendra.G

Maybe you are looking for

  • Acrobat 9 Pro Extended: Enable commenting in Save As-ed PDFs by default

    For Acrobat 9 Pro Extended: When using Save As to save a PDF, is it possible to have Commenting and Analysis enabled for that saved PDF by default? What I currently must do: Open the PDF, choose Comments > Enable for Commenting and Analysis in Adobe

  • DEPRECIATION RUN SHIFT WISE

    1. CLIENT WANTS DEPRECIATION ON SHIFT BASIS FOR MACHINE A DEPRECIATION IS 10 % IF SUPPOSE MACHINE A RUNS FOR 3 SHIFTS FOR 10 DAYS IN A POSTING PERIOD                                                            2 SHIFTS FOR NEXT 5 DAYS AND             

  • Syncing a Playlist to iPod

    How do you sync just a single playlist from your iTunes to your iPod? I can't figure out how to do it without it deleting everything else. Thanks

  • URL in STS mail (ZTUNGUSKA)

    Hi,    I have copied TUNGUSKA to a ZTUNGUSKA bsp page. It works fine, but now, i need to change the start mail URL to get the new one.   Can anyone help me out on this one? Thanks in advance, Marcelo

  • BAPI_OBJCL_CHANGE_KEY AND OBJECT DEPENDENCY

    We use BAPI_OBJCL_CHANGE_KEY  in a class type 023 with object dependency. When we try to modify the characteristic which produces a new valuation in an other characteristic from the same object (material and batch) problems occurs. The system display