Is there a Snow Leop Utilty that can show me all my applications by size???

I'm trying to clean up my hard drive of unwanted programs and curiuos if SL or an outside app has the ability to show me all my applicaions and the space they are taking up on the hard drive.....kind of like the windows control panel/add or remove prpgrams feature.
Thanks for any help and sorry if this isn't the proper forum to address my question.
Chris

Bingo.....that's what I'm looking for.....just trashed a number of lame apps and programs. Thanks Bob!

Similar Messages

Premiere CS3-Is there a video/Website that can show me all that it can do?

I was just wondering if anybody knew of a video/website that can show me all the effects etc of premiere cs3.I have looked through the tutorials that came with the product but feel that they don't really offer any great detail as to what the effects do or what's in the pallet.
I do realize that there are tutorials that you can pay Adobe $150 or so for but I'm looking for something a bit less expensive than that!
Many Thanks

Dougie,
I've not seen, what you're looking for, all in one place. I've got a myriad number of books (CS2), and have downloaded many tutorials. What it seems is that one can explore a feature at a time, and then catalog that knowledge, before moving on to the next Effect. The Help files F1 probably put as much in one place as any book in my library. Unfortunately, one needs to "read between the lines," to get the full potential of each Effect - that, and check out discussion on it here. Some of the names can be a bit confusing, and when looking to do something, picking and using the right Effect might take some time, and be partially counter-intuitive too.
One of the best ways that I've found is to experiment with the Effects, and their settings, after reading up on them in F1. Then, if things still do not seem to be working, formulate a question, "I want to do X. What Effect should I choose?" and post it here.
Going back some versions, there was a great book on the Filters in Photoshop. About 1000 pages of nothing but using the Filters in that program, plus a vast number of free and for-pay Plug-ins. Very comprehensive and all in one spot. I still drag it out, though I'm probably 5 versions of PS away from it and the list of included Filters has expanded exponentially. Wish that I could find one for Premiere.
PP does have one nice feature - the search at the top of the Effects Panel. Only problem is you need to know the name of the Effect you're looking for. F1 will help (no pun intended) there. Still, you need a Rosetta Stone to find out the one you "need," and what its official name is. Same problem often exists with the tutorials. If you know which Effect you will need, or the name of the result, i.e. "Picture in Picture," you can search for that. If all you know is what you want to accomplish, but not what it is named, not so often. Still, watching a tutorial that does not address your immediate need, will still provide you with great info that you can likely use later.
"Classroom in a Book," is a good start (as are the tutorials around) on the Tool names and uses, plus many of the Effects. It's a bit sparse in the "why," but strong on the "doing." Since NLE is a lot of "art," the "why" is important to me, and overshadows the "doing." Sometimes, the exercises do connect-the-dots a bit better, on the why end of things.
Some day, I hope to have used every Efect with every variation, and actually remember what each one did, and why I used it. Not likely until CS50 though.
I also strongly recommend spending a few days with these forums, just reading. Do not skip the previous versions, even if you have only worked in CS3. A lot of the answers apply (some with modifications, but others more directly) to later versions, especially when looking for the choice of Effects, and tailoring them to your needs. Do not forget to use the "First," and "More" links on the forum pages, as there are often many pages of responses. This will also get you up to speed on the naming conventions used. When someone calls the Transition, "Fade to Black," someone else will point out that in PP, it's "Dip to Black."
I had it easier than most, 'cause I came from a cinematography background, with many years using Photoshop for advertising print output. Still, I found that I needed a good glossary of NLE terminology, as I discovered that the language had changed, or was just different. Gotta' learn something new every day of your life.
Hunt

HT4061 Is there an apple support site page that can show me all of my devices (macs, iPads, iPhones, etc) that are covered by an apple care agreement?

I just want to see all of my devices, on one page.

https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Is there any fuction or bapi that can print the report automatic?

Dear All
I want to print the report( generated by command write ) automatic.
Is there any function or bapi that can do it?
Thank you in advance.

Hi,
Please try this.
report ztest_auto_print.
DATA:L_PARAMS TYPE PRI_PARAMS,
       L_VALID TYPE C.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
         IMMEDIATELY                  = 'X'
         LINE_SIZE                    = 220
         RELEASE                      = 'X'
         MODE                         = 'CURRENT'
         NO_DIALOG                    = 'X'
       IMPORTING
*     OUT_ARCHIVE_PARAMETERS       =
         OUT_PARAMETERS               = L_PARAMS
         VALID                        = L_VALID
       EXCEPTIONS
         ARCHIVE_INFO_NOT_FOUND       = 1
         INVALID_PRINT_PARAMS         = 2
         INVALID_ARCHIVE_PARAMS       = 3
         OTHERS                       = 4.
      IF SY-SUBRC <> 0.
      ENDIF.
"But it will take default printer from user settings
      NEW-PAGE PRINT ON   PARAMETERS L_PARAMS NO DIALOG.
       write : 'print is on'.
      NEW-PAGE PRINT OFF.
Regards,
Ferry Lianto

Is there a version of PS that can adjust a batch by a Historgram setting?

Is there a version of PS that can adjust mass numbers of high res images for Contrast and Brightness but at the same time constrained by a Histogram setting?
I have thousands of hi res .sid or .png images that are all of various degrees of brightness and need to be brightened to different degrees along with contrast changes. Although it can obviously be done individually, I am seeking a batch command that can do this without over correcting. Is there any PS version that can analyze each photo and make brightness and contrast corrections but constrained by a histogram setting? Because some photos need twice the brightness or contrast than others, using that batch same command will result in many of the photos being over corrected. Thus, I am looking to adjust via an auto Histogram analysis of each photo to avoid over correction. Is there any software that does this?

Yes, it can be installed on a network. I teach Dreamweaver at a university in London, so I know that it definitely works. But I'm not a systems admin, so I don't know the details of how it's done. However, the following should be a starting point for your sysadmin: http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.

Is ther a BAPI or RFC that can read any table ?

I want to read 35 tables in SAP database. Is ther a BAPI or RFC that can read any table ?
If I use RFC to read these tables, I will write a lot of codes. It may be a large work.

Check these FM
RFC_READ_TABLE
RFC_GET_TABLE_ENTRIES

Is there any limit of character that can be sent as body of the mail ?

Hi,
we are in exchange 2010 server environment. Is there any limit of character that can be sent as body of the mail ?
Sankar M http://messagingdevelopment.blogspot.in/

Hi Munirathinam,
We can use transport rule and content filtering to implement this function, for example "SubjectOrBodyContains" or "
FromAddressContains". More details about it, please refer to:
Transport Rule Predicates:
http://technet.microsoft.com/en-us/library/dd638183(v=exchg.141).aspx
Understanding Content Filtering:
http://technet.microsoft.com/en-us/library/bb124739(v=exchg.141).aspx
Best Regards,
Allen Wang

Is there any Mountain Lion software that can do what Appleworks could

Is there any Mountain Lion software that can do what Appleworks could like drawing, painting, etc.? I find that Pages is very limited compared to earlier software or am I missing something? If Pages doesn't have this capability, what software can I get that does????

Hi,
Windows has a function called Narrator. Narrator reads what is displayed on the screen, including the contents of the active window, menu options, or text that has been typed. Narrator is designed to work with Notepad, WordPad, Control Panel programs, Internet Explorer,
the Windows desktop, and some parts of Windows Setup, and may not read words aloud correctly in other programs.
For more information, please refer the following link:
Turn on and use Narrator
http://windows.microsoft.com/en-IN/windows-xp/help/use-narrator
In addition, based on my research, a kind of third party program named JAWS. You could know well it first, and then decide whether you want to buy it.
Karen Hu
TechNet Community Support

Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

Is there any app or something, that can do that, you can stream any sound coming out of your mac to your airport express?

Yes, he would have to have jailbroken your phone to install malware. If you see an app called "Cydia", that would indicate conclusively that it was jailbroken. I would recommend restoring the phone as new using iTunes. It is your best shot at removing a jailbreak.
You should also change your network password, your email password and your FB password as well as passwords to anything else you've used from the phone. Put a lock code on the phone.
Your best defense against this sort of thing is to NOT give your phone to people you don't trust.
This is a user-to-user forum, by the way. Apple employees don't participate here. If you want to talk to someone from Apple, make an appointment at the Genius Bar at your local Apple Store.

Is There Any Tool in Java That Can Create Reports?

Is there any tool in Java that can create reports? What is the tool?

Google is your friend
http://www.google.com/search?q=java+reporting+tools&sourceid=mozilla-search&start=0&start=0&ie=utf-8&oe=utf-8
I've heard good things about JasperReports (theres a link on the first results page from the above Google search) but I haven't used it myself.

Is there any iPhone midi controller that can control logic just by one usb

is there any iPhone midi controller that can control logic just by one usb line to the mac?
Free ones would be the best!
Thanks!

If you have a Mac Pro and an iPhone, surely you can afford a router? It's about the same price a a decent meal for two.

Is there any iPhone midi controller that can control logic just by USB?

is there any iPhone midi controller that can control logic just by one usb insert to the mac?
Free ones would be the best!
Thanks!

Although not USB, there are a couple of iPhone/Touch apps that can control the Mac using a wireless network. MobileMouse (free & paid versions) do a great job, as well as Logitech's TouchMouse. Both will allow you to use the touch screen to control the mouse, which essentially gives you the ability to do many things in Logic. I've used them, for example, to begin a recording, which frees me from being near the computer.

Is there a button that can show your deleted messages

Is there a button that can show your deleted messages

Add-ons are contained in Firefox; they don't have any access to programs running on your computer. The following add-ons can monitor your bandwidth usage in Firefox.
* https://addons.mozilla.org/firefox/addon/datafox/
* https://addons.mozilla.org/firefox/addon/minimeter/
Any good software firewall lets you control which programs connect to the Internet.
* https://en.wikipedia.org/wiki/Comparison_of_firewalls
If you need to see how much bandwidth various programs use up, look for a bandwidth monitoring tool.
* http://www.softpedia.com/get/Network-Tools/Bandwidth-Tools/

Hi! I'm getting an iPhone 4 soon, so my question is; is there some kind of "app" that can upgrade iPhone 4 to 4s?

I'm getting an iPhone 4 soon, so my question is; is there some kind of "app" that can upgrade iPhone 4 to 4s?

No, there isn't.
The phones are different as in with different hardware.
If you want a 4s then I would suggest in getting the 4s.

Is there a Snow Leop Utilty that can show me all my applications by size???

Similar Messages

Maybe you are looking for