Is there a solution or work around for flash player issues?

Is there a solution, app or work around for flash player issues w/ iPad 2? Maybe even something in development?

Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so you could try checking there for your sites (and there is the built-in YouTube app). But flash itself is unlikely to ever be supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ , and Adobe have failed to create a version of flash that works on iOS
There is a search box on the right-hand side of this page for further info.

Similar Messages

Work-around for flash player hangs/freezes during initialisation...

Hello all,
Are you also facing the problem that the flash player hangs/freezes during execution of an xcelsius file? Try if the following work-around works also for you.
I am (was) facing the same problem: a swf file about 1474 kb with many components, generated with Xcelsius 5.3.2.0., trying to view with flash player 10.1.82.76. Did also hang/freezed! The file was originally build with version 5.3.0 and worked o.k. then...
The work-around which works for me is the following: I had all my components organized in groups. After ungrouping them all (which I think is a major drawback) and exporting it to swf, the report works! File size is more or less the same...
Maybe you can give this work-around a try for your own work....
So I think the SAP/Adobe bug has something to do with grouping of components or grouped components build in an earlier version of Xcelsius 2008... The following test that I will perform is ungrouping the components and then re-grouping them again in version 5.3.2.0....
Greetings
Erik-Jan Vriens

Thank you for sharing this. Had a similar problem before and did some tinkering around with the file and all of a sudden it worked again. Fair bet it was exactly that as well.
In general Xcelsius performance goes down the drain if you start using many components. It is to be expected, somewhat, I guess. Various bugs also pop up because components do not always seem to play nice.
One thing I have found as well is that if you are doing a waterfall approach of constructing with a bunch of iterations in the implementation phase, you may end up with a bunch of components that were there early on. Sometimes they start messing up over time, because you've been playing with the data below or with the chart itself. E.g. on line charts label start distorting, or the frames flicker. In radiobutton boxes the boxes are not aligned properly. Checkbox labels are clipped at the end until you hover over them etc..
Solution: remove the components, add anew. If not too many components with a tough spreadsheet below, export Excel, start a new.

Work around for Flash Player 9/SMS 2003 install issues?

All,
As has been stated here previously, there appears to be an
issue which prevents the installation of Flash Player 9.0.16.0 when
pushed from SMS to a system which has a standard user logged in,
even when using a Domain Admin installation account. As long as the
user has Admin rights, or there is no user logged on, the install
goes smoothly.
I work in a partial retail environment, and all of our retail
machines are rebooted nightly via a sheduled task. So, naturally
when I was tasked with pushing Flash Player to these mahcines, and
found the above issue, I simply only allowed the program to kick
off when no user was logged on. Thus, when each machine reboots and
sits at ctrl+alt+del at 3AM, viola, the install kicks off, Flash
installs, and everyone's happy.
I now have to push Flash Player 9 to the rest of my company,
with no guarantee that many machines will ever sit for any
appreciable time logged off. In fact, the only time most of them
reboot is when we force them to after Windows Updates each month.
=op
Has anyone found a fix for this issue? I'd really love to be
able to advertise Flash Player and let the user install from
Add/Remove Programs at their leisure.
Thanks in advance!
Bill

I was having the exact same problems - uninstalled/installed
Flash and Shockwave. Used the appropriate uninstaller, searched for
rogue .dll extension files, cleaned out the
C:\Windows\System32\Macromedia\Flash files, looked at the manage
add-ons, posted on this forum, e-mailed Adobe, spoke with them on
the phone and even uninstalled IE7 and went back to IE 6. None of
that helped.
Reading through some of the responses on various posts, I
found the following:
Uninstall flash with the latest Adobe stand alone uninstaller
Download Complete Standalone installer Flash Player 9 earlier
version from
http://www.softwarepatch.com/internet/flash.html
Uninstall shockwave with the latest Adobe stand alone
uninstaller
Download Stand-alone installers for Shockwave Player:
previous versions only
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18629
Note: Users of Windows XP operating system must use the 8.5.1
Shockwave player or higher. For more information, please
seeInstalling the Shockwave Player on Microsoft Windows XP
(TechNote tn_15924).
Windows Shockwave Player 9.0.0.434
I tried this last night - one and then the other one - and
they both are running fine.

Is there any fix or work around for this year old dictation bug that messes up Photoshop??

Other than disabling it?
Details here https://forums.adobe.com/message/5835501
Encounted a very major bug today that I need to figure out how to get around asap as it's completely preventing me from doing any work.
Whenever I edit any text - be it editing an existing text layer, or with a new one, whatever text is there just randomly and without warning disappears. Doesn't matter wether I'm changing the color, font, font size or any other type settings. Sometimes I just move the mouse while in editing mode and the text just vanishes.
Made a video of the bug in action. Virtual keyboard on screen so you can see that I'm not hitting any keys to make the text disappears. Today is the first day I noticed this issue and I have absolutely no idea what is causing it but it happens 99.9% of the time that I try editing any text. Latest version of Photoshop, CC, OS X etc.
http://f.cl.ly/items/2s3y0d2d1R1c2Y173Q38/photoshop-bug.mov
Please advise, I really need to get it figured out as soon as I can - as you can imagine impossible to do any sort of work without being able to type a single character.
Adobe claims it's an Apple problem:
Chris Cox (Staff)
The bug is in the dictation code in MacOS. We are not ignoring the problem - but we cannot fix bugs in Apple's OS code.
So far they say all you can do is just disable diction: http://feedback.photoshop.com/photoshop_family/topics/cs5_text_deleted_upon_sele cting_after_updated_to_os_10_9

If it was a bug in Apple's dictation code, every other program with text entry would be affected.

IMovie on iPad... Anyone have any ideas or work arounds for the following issue?

I use iMovie on my iPad to edit my go pro footage because it quick and easy and up until now have been more than happy with it.however I've come across a problem and need some help.
Up until now any videos I've made have been relatively short and usually fit onto one SD card (I used the camera kit to transfer from SD to iPad) but I've just come back from a snowboard holiday and have 60gb of footage to edit down. So I have the following questions.
1) if I put the files I copied off the SD back onto the sd card from my computer why won't the iPad let me import them? How can I resolve this issue.
2) when I have a series of shortened video files how can I transfer them off the iPad to free up space to edit larger 1s? Also how can I get all the short clips back at the end?
Thanks
Chris

Try This
http://support.apple.com/kb/PH12359

Server 2003 R2 sp2 on IBM T42: is there a work-around for getting bluetooth to work?

I have seen a few forums here and there talking about possible work-arounds for the lack of a bluetooth stack in server 2003, and they have not worked.
The driver here:
http://www-307.ibm.com/pc/support/site.wss/MIGR-50245.html
Installs without compalint, but after reboot, cannot find a bluetooth device. The bluetooth service starts and runs happily.
I found a hack-around solution involving update Q323183 for tricking 2003 into installing a bluetooth stack elsewhere, it also failed to return any results.
Has anyone figured this one out?

welcome to the forum!
i had this working on my T42p back in the day but that was 6 years ago. it installed using the driver from IBM and the MS BT stack. i'm about 95% sure i was using the standard version of 2003 which by default includes a BT stack. enterprise and datacenter do not since there's no logical reason for either one to be running bluetooth due to security risks.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Work around for Application.cfc

I have an Application.cfc file that outputs a header and footer page for every request. That works wonderful but if I try to open a page that is doing a <cfgrid> using a CFC file than I get an error of "Error invoking CFC /GATS/CFC/purchaseOrder.cfc : Internal Server Error [Enable debugging by adding 'cfdebug' to your URL parameters to see more information]" when opening the page.
Commenting out the header/footer include in the Application.cfc file lets the <cfgrid> populate with the CFC file. Is there a fix or work around for this?
Application.cfc file
<cfcomponent output="false">
<cffunction name="onRequestStart" returnType="boolean" output="true">
      <cfargument name="thePage" type="string" required="yes">
     <cfset PageName = GetFileFromPath(thePage)>
    <cfif not IsDefined("session.user.isAuthenticated") or
          session.user.isAuthenticated equal session.no>
      <cfif FindNoCase('index.cfm', PageName) is not 0>
        <cfelse>
          <cfset session.messages[1] = "Authentication required.">
          <cflocation url="#application.WebAddress#" addtoken="no">
      </cfif>
    </cfif>
    <cfif FindNoCase('index.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "">
      <cfset request.Screen = "Login">
    </cfif>
    <cfif FindNoCase('mainMenu.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "Home">
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('purchaseOrder.cfm', PageName) is not 0>
      <cfset request.PageNavigation = '<a href="mainMenu.cfm">Home</a> &##8226; New Purchase Order'>
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/header.cfm">
    </cfif>
    <cfreturn true>
</cffunction>
<cffunction name="onRequestEnd" returnType="void" output="true">
      <cfargument name="thePage" type="string" required="yes">
    <cfset PageName = GetFileFromPath(thePage)>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/footer.cfm">
    </cfif>
</cffunction>
</cfcomponent>
purchaseOrder.cfm
<cfgrid name="AccountGrid" format="html" bind="cfc:GATS.CFC.purchaseOrder.GetQuantities({cfgridpage},{cfgridpagesize}, {cfgridsortcolumn}, {cfgridsortdirection})">
<cfgridcolumn name="ID" header="ID" display="yes">
<cfgridcolumn name="vendor_name" header="Name" display="yes">
</cfgrid>
I found this on the web:
That error is due to our application.cfm having a single HTML comment at the
start of the file. Apparently if your Application.cfm or Application.cfc file
outputs ANYTHING, binds to CFCs with AJAX (via HTML CFGRID or CFAJAXPROXY, for
example) do not work. The CFC will be called, but the data from it will never
"flow" into the CFGRID. Removing the comment from the Application.cfm file took
care of our CFGRID issue.
This there a way to have an Application.cfc file that displays a header and footer for every page and have and
have a page have a <cfgrid> in it?

BKBK,
I created the examples you posted and commenting out the header/footer lines in my Application.cfc displayed the cfgrid results (updating the query to a table I had). Running the same example code with the header/footer included in the Application.cfc would not show the cfgrid results.
I attached the Application.cfc file for review.
Couldn't attach the file.
Application.cfc
<cfcomponent output="yes">
<cfset this.name = "GATS">
<cfset this.clientmanagement = "true">
<cfset this.applicationtimeout = CreateTimeSpan("0","0","20","0")>
<cfset this.sessionmanagement = "true">
<cfset this.sessiontimeout = CreateTimeSpan("0","0","20","0")>
<cfset this.scriptProtect = "true">
<cfparam name="session.yes" default="Yes">
<cfparam name="session.no" default="No">
<cffunction name="onApplicationStart" returnType="boolean" output="no">
    <cfset application.Directory = "/GATS/">
    <cfset application.Datasource = "IA-webapplications">
    <cfset application.DatasourceGATS = "SBS-GATS">
    <cfreturn true>
</cffunction>
<cffunction name="onApplicationEnd" returntype="void" output="no">
    <cfargument name="ApplicationScope" required="yes" />
</cffunction>
<cffunction name="onSessionStart" returntype="void" output="no">
    <cflock scope="session" timeout="5" type="exclusive">
      <cfset session.no = "No">
      <cfset session.yes = "Yes">
      <cfset session.new = "New">
      <cfset session.user = StructNew()>
      <cfset session.user.isAuthenticated = session.no>
      <cfset session.user.emplid = "">
      <cfset session.user.userSSOId = "">
      <cfset session.user.firstName = "">
      <cfset session.user.lastName = "">
      <cfset session.user.name = "">
      <cfset session.messages = ArrayNew(1)>
      <cfset session.savedInputValues = ArrayNew(1)>
      <cfset session.filesTransferred = "">
    </cflock>
</cffunction>
<cffunction name="onSessionEnd" returntype="void" output="no">
    <cfargument name="SessionScope" required="yes">
    <cflock scope="session" timeout="5" type="exclusive">
      <cfset Arguments.SessionScope.user.isAuthenticated = session.no>
      <cfset Arguments.SessionScope.users.emplid = "">
      <cfset Arguments.SessionScope.user.userSSOId = "">
      <cfset Arguments.SessionScope.user.firstName = "">
      <cfset Arguments.SessionScope.user.lastName = "">
      <cfset Arguments.SessionScope.user.name = "">
    </cflock>
</cffunction>
<cffunction name="onRequestStart" returntype="void" output="yes">
    <cfargument type="String" name="TargetPage" required="yes">
    <cfset PageName = GetFileFromPath(TargetPage)>
    <cfif not IsDefined("session.user.isAuthenticated") or
          session.user.isAuthenticated equal session.no>
      <cfif FindNoCase('index.cfm', PageName) is not 0>
        <cfelse>
          <cfset session.messages[1] = "Authentication required.">
          <cflocation url="#application.WebAddress#" addtoken="no">
      </cfif>
    </cfif>
    <cfif FindNoCase('index.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "">
      <cfset request.Screen = "Login">
    </cfif>
    <cfif FindNoCase('mainMenu.cfm', PageName) is not 0>
      <cfset request.PageNavigation = "Home">
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('purchaseOrder.cfm', PageName) is not 0>
      <cfset request.PageNavigation = '<a href="mainMenu.cfm">Home</a> &##8226; New Purchase Order'>
      <cfset request.Screen = "">
    </cfif>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/header.cfm">
    </cfif>
</cffunction>
<cffunction name="onRequestEnd" returntype="void" output="yes">
    <cfargument type="String" name="TargetPage" required="yes">
    <cfset PageName = GetFileFromPath(TargetPage)>
    <cfif FindNoCase('logout.cfm', PageName) is not 0>
      <cfelse>
        <cfinclude template="includes/footer.cfm">
    </cfif>
    <cfif FindNoCase('sessionTerminated.cfm', PageName) is not 0>
      <cfinvoke method="onSessionEnd">
        <cfinvokeargument name="SessionScope" value="#session#">
      </cfinvoke>
    </cfif>
</cffunction>
<cffunction name="onError" returnType="void" output="no">
    <cfargument name="exception" required="true">
    <cfargument name="eventName" type="string" required="true">
    <cfthrow object="#arguments.exception#">
</cffunction>
</cfcomponent>

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

In OBIEE mobile apps designer there is no option for multi select prompts?The navigation page gives option only for single select?Is there a work around for this?

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

Is there a work around for my Akai Pro EIE Pro interface to work with mountain lion

Does anyone have a work around for the Akai EIE Pro Audio interface that just stopped working after the mountain lion upgrade. Akai has no response currently.

Yep,
They say they're working on it.
It ***** though
effo

Got error message with web based application that it would only work on MS Explorer 6.0 or newer. Any work around for this?

When accessing a web based program I got a message that it could only be accessed using MS Explorer 6.0 or newer. Is there a work around for this?

There is a way to do this.
But it works or not, I have no idea.
Enable "Develop menu".
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click the Develop menu and select "User Agent"
There are choices. Do not forget to make Safari default again afterwards.

Work around for radio tuner service not working

A work around for the lack of radio tuner service that has appearently hit Itunes versions lower than 11.
We all hope that Apple will restore Radio Tuner Service for us legacy products users soon, but I've been thrown under the bus more than once by Apple in the last 25 yrs to put much hope in that (I started with an Apple III w/a Z80 card running C/PM, yeah I'm that old)
Have your iTunes and your favorite browser open.
In your browser go to http://vtuner.com/setupapp/guide/asp/BrowseStations/startpage.asp
This will give you a list of Genre's, etc of streaming internet stations.
When you select a genre you'll get a list of stations that shows station ID, what type of feed codec and data rate.
Select any of the AAC or MP3 feeds.
Select play.
This will send a small download file to your computer containing the selected feeds URL.
Your computer will ask what app to use to open the file, select iTunes.
This will automatically open a file called Internet Songs at the end of Playlists in iTunes (if you don't already have one), and will install the URL there.
All the stations you selected will now be permanently stored in Internet Songs.
Viola, your very own custom personal internet radio playlist!
GT
Dual Core 2Ghz G5, 9.22/10.4.11/10.5.8

Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard...

Work around for User ID 32 character limitation in CCX Agent?

Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6

Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !!

Work around for 60 column limitation

All,
Does anyone know of a work around for the 60 column table limitation?
Will this be changed in a future release?
Thank you.

I also need a workaround for this. I have users that want to download data as excel files, and the built in export to csv was working great until the dynamic sql statement pushed itself to more then 60 columns. Is there some other way to provide a link to the data as csv? Can I hook into the csv functionality of HTML DB? Can I create a page template that modifies the Content-Disposition and/or Content-Type so the browser thinks the page is csv/excel so that I could dump out a clob of data I put together? Should I just have a button that provides a link to something outside HTML DB to query and dump data from the database?
As it is, the users really don't need to see the data on the screen. I just need a way to dump 60+ columns of data to the user as csv.

Work around for Excel's array formulae?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?
I attach an image shot of my Excel spreadsheet which may help:

Hi Rich,
Some made-up dates.
If you have multiple x's in a column, change all but the most recent to "Done" or something other than x This approach looks for the date in Column A that matches a single x in a task column.
This example works on years. I hope you change your oil and filter more often .
One Header Row and four Footer Rows. Enter Years between services (D9) from the keyboard.
To find the date of the last service (the only x in Column D)
D10 contains this formula:
=INDEX($A,MATCH("x",D,0))
You can Fill Right to other columns.
"Years since" (D11) contains this formula:
=YEAR(TODAY())-YEAR(D10)
"Alert" (D12) contains this formula:
=IF(D11>D9,"Hey, You!", "OK")
Conditional Formatting in D12 sets the text to red if it equals "Hey, You!"
It would be best to combine these steps into one complex formula. Numbers is slowed down with each Header or Footer in a Table.
Regards,
Ian.

Work around for Excel "Array Formula" in Numbers?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?

It not clear from your post, but I get the impression you are inquiring about Numbers for OSX. This is the iOS iWork forum. You may want to repost here: https://discussions.apple.com/community/iwork/numbers
If I'm wrong, and you are asking about Numbers for iOS, these links may help: http://help.apple.com/numbers/ipad/2.2/#/tan5ca02385
http://help.apple.com/functions/mac/5.0/
But Numbers for iOS does not fully support conditional text.

Is there a solution or work around for flash player issues?

Similar Messages

Maybe you are looking for