Is there a standard SQLJ implementation?

I am looking for a SQLJ that can work with all JDBC
drivers. I tried Oracle's SQLJ, but I could not make it work with non-Oracle database.
Thanks,
Ben

Hi!
SQLJ is database specific! You have to precompile and bind a sqlj program against a database. You need the database specific utilities.

Similar Messages

How to retrieve deleted standard enhancement implementation

Hi all,
The standard ehancement implementation OIA_SI_RMMR1MRS has been deleted from the enhancement spot ES_RMMR1MRS in the development client. But it is present in the testing system and production system. Is there anyway to retrieve that back in the devlopment system?
Regards,
Asha

Hi,
May be you can try and assign the perticular component to a transport request and then transport it to the development system. I think your sys admin can help you in this regard.
Regards,
Sesh

Is There a Standard or Common JNI to the (POSIX) C Driver Interface?

I have the source code in (POSIX) C for an RS422 Serial Driver.
I've been asked to create the JNI for using the 8 driver interfaces:
install()
open()
read()
write()
ioctl()
select()
close()
uninstall()
This seems like something that enough people would want to do that there'd be a Standard or Common Practice way to do this. However, my Google-foo has let me down on finding it.
Since I have the source code, I've considered re-compliling the driver code into a library and writing the JNI to call into that library. The potential problem I see with this is that normally the driver would get dynamically linked into the kernel, and the calls from Java would run the library functions in userspace.
I've also considered creating the JNI to call clib functions (read, write, ioctl, ...). Then the driver would get used normally, but the problem I see with this is that install() and uninstall() do not seem to have a standard (POSIX) C function that directly corresponds do them. Most Linux forums mention insmod and mknod to install the driver and make the device node, but LynxOS uses dr_install and dev_install.
So here's my question: Is there a Standard or Common Practice way to access a driver from Java?

870745 wrote:
So what I was hoping to find out about was a standard or common practice that applies to the code ...As applies to java.comm?
I doubt there is such a thing. There just are not that many implementations. And most are proprietary so they are not saying.
You can look at rxtx (java comm api) and download the reference implementation and see which ways they do it. If they both do it one way that might be good. If they do it different ways then neither means much.

Is there a standard way to plug in custom authentication code

Is there a standard way to plug in use my own custom authentication code using forms authentication when I am using servlets/jsp for my website. I read the spec and found that the spec requires servlet containers to support forms authentication, but, the process seems to be transparent to the developer. This restricts me to store user information in the format imposed by the container provider. I cannot use, MS Active directory for example, to store user attributes and use it for forms authentication. Also, I could not find any standard way in which HttpServletRequest.getRemoteUser() works. Shouldn't there be a set of interfaces abstracting authentication process, which developers can implement for customized authentication mechanisms.
Thanks
Nikhil.

Greetings,
Is there a standard way to plug in use my own custom authentication code using formsNo. There are standard "authentication mechanisms" but that's not quite the same thing. Like most things in J2EE, the "what" of things are specified but the "how" them are left to the vendor. Consult your vendor docs.
authentication when I am using servlets/jsp for my website. I read the spec and found that the spec
requires servlet containers to support forms authentication, but, the process seems to be transparent
to the developer. This restricts meFor the most part, "forms" authentication is transparent to the developer - at least, with respect to directly responding to and handling the request. The developer, however, does have some significant work to do with regard to the form itself and any associated error "pages". The point of the "standard authentication schemes", however, is to delegate the work of actual authentication processing to the container and, thereby, make it transparent to the developer (one of the many "application services" provided by the application server ;).
to store user information in the format imposed by the container provider. I cannot use, MS Active
directory for example, to store user attributes and use it for forms authentication. Also, I could notAgain read your vendor docs on how to "plug in" your own authentication handler(s). Most support it in some fashion which typically involves implementing some interface(s) and/or abstract class(es). Many also support it through their own "standard" component handlers, like an EJB invoker, where the invoked component is expected to function in a pre-determined way.
Of course, there's nothing in the specification that says authentication must be handled by the container (only that it must be supported)! You're free to implement a login mechanism through your own proprietary JSP page and/or servlet (and/or EJB), and bypass the container entirely. ;)
find any standard way in which HttpServletRequest.getRemoteUser() works.Regardless of the standard authentication scheme used (i.e. handled by the container), the user's authenticated login ID is returned by the method. Unfortunately, this means the method is useless if your own "authentication system" is used in lieu of the container - but, of course, in such a case the method should also be un-needed. ;)
Shouldn't there be a set of interfaces abstracting authentication process, which developers can
implement for customized authentication mechanisms.It's a matter of debate.
Thanks
Nikhil.Regards,
Tony "Vee Schade" Cook

Is there any standard SAP table which stores the license number assigned to a delivery item

Hi Experts,
This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
Our question is: is there any standard SAP table which stores the license number assigned to a delivery item?
We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
Helpful answers Text Removed
Regards,
Jagan
Message was edited by: G Lakshmipathi
Dont add such text in your post

Hi Lakshmipathi,
The export control log can be accessed by going to delivery Extras-> Export license log
We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
Regards,
Jagan

I am setting up my new iPad mini and did not put in a password. The screen timed out and it's asking me for a pass code. I didn't set one up. Is there a standard passcode for new devices?

Setting up new iPad and screen locked. Is there a standard assigned code to get past the locked page?

No

Is there any standard report for capacity of machines used /ideal

Hi,,
i am interested in knowing any standard report which tells us how long is my machine ( work center) ideal and how many hours i have used during a period of say one month.
how can we use capacity planning and work scheduling in repetitive manufacturing . pls tell me a the procedure to be followed.
thanks in advance
regards
madan mohan

Hi,
thanks for your reply . but i am not able to get a report on total capacity available in the last month and capacity i have utilized for that month . so that i can derive my work center ideal time during that past month.this gives the time i have kept the machine ideal . Is there any standard report meeting this requirement.
pls give me some solution
regards
madan

Is there any standard report for GR / IR to see as on particular date

Hi ,
Is there any standard report for GR/ IR to see as on paricular date.
please help me. points will be given.
regards,
Hari priya

Hi,
Please go to MR11.
It may help you.
Regards,
Jigar

Is ther any standard report for GR/IR Maintenance Main Tool

is ther any standard report for GR/IR Maintenance Main Tool ?

Hi Salsa,
Use Tcode MB5S --> List of GR/IR Balance.
Assign pts, if found useful
Regargds
Sandeep Acharya

Is there any standard report which give all information about purchase orde

hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght.
thanks .

Hi,
Try following
MC$G PURCHIS: Material Purchase Val Selection
MC$I PURCHIS: Material Purch Qty Selection
Kedar K

Is there any standard report which give all info about purchase order.

hi
is there any standard report which give all information about purchase order.
i need following information from Purchase Order.
Vendor No, vendorname, PO No, basic     Excise      insurance     Frieght.
Thanks.

Hi,
Following are reports for PO list.
ME2C           Purchase Orders by Material Group
ME2J           Purchase Orders for Project
ME2K           Purch. Orders by Account Assignment
ME2L           Purchase Orders by Vendor
ME2M           Purchase Orders by Material
ME2N           Purchase Orders by PO Number
Message was edited by:
        Vigneswaran S

How to implement Spring Web Flow in CQ5 or is there any module to implement it in CQ5

How to implement Spring Web Flow in CQ5 or is there any module to implement it in CQ5

Hi,
Thanks for your suggestion..
I tried using the "Services for Object" option and i was able to upload a document. But when i try to view the document in PO display ME23N, by clicking the Icon as you mentioned the attached document is not displayed.
Only when i go in Change mode ME22N and select "Service for Object" i get the documents displayed. What is the way to get the document displayed ?
Regards,
Hemant

8while generating reports is there any standard way of fectching

8.while generating reports is there any standard way of fectching data.i.e u have take matnr from mara not from makt.etc any tips please.

hi ,
this can be done by the grouping option.
only necassary objects : this will collect only the required objects .
in data flow before : this will activate all the objects that the object is dependant.
in data flow afterwards : this will actiivate all the depandant objects on the in the data flow .
in dat fow bfr n aftr wards : will activate all the objects in the data flow ..
normally in implemantation we use bfr n aftrwards to collect all the objects in th dataflow.
regards ..... Kumar Sarvepalli //////

Hi Is there any standard program?

Hi All,
This is my question to the forum? Is there any standard program to create a report for AP manager to manage workpools? Please help me..
Vicky

Hi,
The requirement is to create a report with a transaction for AP manager to view all the expense reports assigned or to be assigned. Once he see the list he must be able to assign the expense reports to different processors in the workpool.
Thanks
Vickie

Is there any standard BAPI available to vendor , customer and G/L ?

Hi all,
any standard BAPI available to vendor , customer and G/L? I found BAPI_CUSTOMER_CREATE and BAPI_VENDOR_CREATE but when i traying to execute , then control directly taking to XD01 and XK01 initial screen's .i need to create vendor and customer master data using BAPI(data will come from legacy system).
Other than these , is there any standard BAPI available .Pl tell me
Regard's,
Pratap.

Hello Pratap
For customer the following BAPI is available:
BAPI_CUSTOMER_CREATEFROMDATA1
"This fm uses a reference customer as template for the new customer.
" Using this BAPI you cannot create a new customer from scratch
Regards
Uwe

Is there a standard SQLJ implementation?

Similar Messages

Maybe you are looking for