Is there a Step pattern sequencer in the Logic's Arpeggiator

Hi,
I use Reason 4, and the RPG-8 is amazing. It's easy and intuitive, and there is even a step pattern editor.
I really miss this function in Logic.
So I'm wondering if I miss something, or if there is no step pattern sequencer in the logic's appreciator ?
I'm going to use this post to extend my question :
In reason 4 there is also an independent Matrix pattern sequencer.
Is there anything like that too in Logic?
Thank you.

Hum ok, but my initial questions is :
Did I miss something, is there a step pattern sequencer in the Logic's Arpeggiator (like the one in Reason 4).
Thanks for your answer anyway

Similar Messages

Running steps and sequences at the same time

Hi,
I need to run some steps and sequence at the same time in my application due to test time restrictions. I am using Teststand 2.0. Colud you please describe me the methodology.

Hi,
Synchronization Step types came in at version 2 and there should be an example in the \teststand\examples folder.
Regards
Ray Farmer
Regards
Ray Farmer

How to access the Requirements property (& subproperties) of steps and sequences with the TestStand API

The concept of associating teststand objects to unit requirements for traceability purposes was added to TS 3.5, and I need to find out how to access the array of strings used to store unit requirements in step objects, sequence objects and sequencefile objects. The teststand help file points out that the requirements list of a sequencefile object is accessible using the PropertyObjectFile interface, and also points out that Requirements is a property of the sequence and step classes. Furthermore it implicitly states that the requirements property has a Links subproperty which is an array of strings, but that is pretty much the extent of the documentation on this new feature so far. There seems to be no expression function available to get to those requirements either.
I know that this feature was added to allow TestStand to interface with RG, and I am planning on using RG, but I would also like to do things with the requirements information within TestStand.
Anyone?

Are you talking about the Requirements Gateway? It is a separate product from NI that will do what you are looking for. I haven't used it so I am not sure of the API chain to make it work. Take a look and see if that is what you were thinking of.
Hope that this helps,
Bob Young
Sorry, I just re-read your original post and see that you are looking to also use the Requirements Gateway, so you obviously know about it. I don't know what the API changes were that made it work so I am not going to be much help.
Sorry about posting before getting the correct information from the original.
Bob Young
Message Edited by Bob Y. on 08-24-2006 04:54 PM
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

Is there any way how to let the logic studio 8 work in Lion OS?

hi, i'm now using a new macbook pro with the Lion OS. Is there a way to let the logic studio 8 work well in Lion OS? thanks!

Considering that Logic Pro 8 was released years before Lion, I would call it "pure luck", if it runs well - I would assume that it is untested by Apple, because they probably only tested Logic Pro 9 on Lion (and released an update for it).
However if you have Lion 10.7.2 installed, Logic Pro 8 at least launches just fine.

Get name of step's sequence

Hi all,
I have a test sequence which consists of a group of sub-sequences. Each sub-sequence contains a set of steps which report results to my report file. I've created a custom callback sequence (ModifyReportEntry) in order to modify the report body text for each step, but I'd like to include then name of the step's sequence in the report line for that step.
I'm guessing that this property is somewhere in the Parameters.Result.TS realm, but can't figure out what it is. (Using TS 4.1)
Can someone help me out?
Thanks!
Jeff

Jeff,
You can use RunState.Caller.Parameters.SequenceName from your "ModifyReportEntry" Sequence File Callback. So the Statement expression would look something like Parameters.ReportEntry
+= "<tr><td>Sequence
Name</td><td>"+RunState.Caller.Parameters.SequenceName+"</td></tr>".
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

Is there a step sequencer for drum patterns in logic express?

I was wondering is there a step sequencer for doing drum beats in logic express? It would be much easier if there were, that way I wouldn't have to record it and then try and fix my beat in the matrix editor. I believe that there is a step sequencer included with ultrabeat but I know that that is only with logic pro.

The latest issue of Sound on Sound covers how to do this with the Hyper Editor.
http://www.soundonsound.com/sos/mar06/articles/logictech.htm
That link will only work if you're a subscriber, until SOS declassifies it for everyone in six months.
The GM method will work for something that's GM compatible, and you can use this method to create your own custom version for any other drum instrument you want. It's pretty sweet. The gist of it is you create a mapped instrument in the environment, cable it to your audio instrument of interest, rename the notes to whatever drum/percussion sound they match (if needed), create a MIDI region with one note each, then make a hyper set out of it.
It seems like a lot of steps, but it's pretty simple once you've done it once, and you end up with a very flexible step sequencer-like editor. You can repeat these steps to make editors that are customized for any instrument plugin you like.

Device Fails Task Sequence at the Windows Setup Unattend Step, but No Unattend.xml is Specified

This is the first During the task so the only unattend.xml When looking at Here is the end 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Error 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Error 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Warning 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info The error code 0x8030000b Can anyone offer time i have encountered a laptop straight from OEM with two physical SATA disks (Disk 0 = 256gb SSD, disk 1 = 750GB HDD). [this might not be relevant, but as all other machines are working fine with this TS+WIM, i will mention it.]
sequence, after the WIM is applied and the device reboots, the Windows setup fails and displays a general Unattend error (stating the specialized pass has failed) There is no unattend.xml specified in the apply operating system image step,
is the one generated by the task sequence.
the C:\Windows\Panther\Unattend\Unattend.xml everything seems OK to me.
of the setupact.log
[setup.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\RUNDLL32.EXE / arguments = shsetup.dll,SHUnattendedSetup / pass = specialize / manifest path = C:\WINDOWS\Winsxs\Manifests\amd64_microsoft-windows-shell-setup_31bf3856ad364e35_6.1.7601.17514_none_3080d81b003fb8dd.manifest
[setup.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\DJOIN.EXE / arguments = / pass = specialize / manifest path = C:\WINDOWS\Winsxs\Manifests\amd64_microsoft-windows-unattendedjoin_31bf3856ad364e35_6.1.7601.17514_none_113aea0e8374286d.manifest
[setup.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\SETUPUGC.EXE / arguments = / pass = specialize / manifest path = C:\WINDOWS\Winsxs\Manifests\amd64_microsoft-windows-deployment_31bf3856ad364e35_6.1.7600.16385_none_57e3e87206ff08ca.manifest
[setup.exe] [Action Queue] : Executing command "C:\WINDOWS\SYSTEM32\RUNDLL32.EXE" shsetup.dll,SHUnattendedSetup specialize
[setup.exe] [Action Queue] : process exit code = 4
[setup.exe] [Action Queue] : Unattend action failed with exit code 4
[setup.exe] [Action Queue] : ProcessActionQueue finish (hr = 0x1f2000)
[setup.exe] Execution of unattend GCs failed; hr = 0x0; pResults->hrResult = 0x8030000b
[0x0606cc] IBS Flushing registry to disk...
[0x0606cc] IBS Flush took 46 ms.
IBS Callback_Unattend_InitiatePass: Runtime error occurred while applying unattend answer file; hrResult = 0x8030000b
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x8030000b
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: Component name = [Microsoft-Windows-Shell-Setup]
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].
IBSLIB PublishCriticalError: Publishing critical error message [Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].]
[0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for Error published by ErrorHandler
DIAG CallBack_DiagnosticDataSend: Setup was started from Phase 4. Disabling Diagnostics [DiagnosticDataSend] in this scenario
[0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
[0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
[0x090086] PANTHR pWorkerThreadFunc -- Stopping
[0x090086] PANTHR pWorkerThreadFunc -- Stopping
[0x090086] PANTHR pWorkerThreadFunc -- Stopping
PANTHR DeleteCriticalSection for pExecQueue->csLock;
[0x0605a6] IBS Requested UI to hide the language and locale selection pages.
[0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
[0x0601d7] IBS InstallWindows:Error Type = 3211266
[0x090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.
is not recognised by cmtrace
any ideas as to the cause of this?

Here is the latest failure, i think it is still identical:
2015-03-18 15:19:48, Info [setup.exe] [Action Queue] : Executing command "C:\WINDOWS\SYSTEM32\RUNDLL32.EXE" shsetup.dll,SHUnattendedSetup specialize
2015-03-18 15:19:48, Info [setup.exe] [Action Queue] : process exit code = 4
2015-03-18 15:19:48, Error [setup.exe] [Action Queue] : Unattend action failed with exit code 4
2015-03-18 15:19:48, Info [setup.exe] [Action Queue] : ProcessActionQueue finish (hr = 0x1f2000)
2015-03-18 15:19:48, Error [setup.exe] Execution of unattend GCs failed; hr = 0x0; pResults->hrResult = 0x8030000b
2015-03-18 15:19:48, Info [0x0606cc] IBS Flushing registry to disk...
2015-03-18 15:19:48, Info [0x0606cc] IBS Flush took 110 ms.
2015-03-18 15:19:48, Warning IBS Callback_Unattend_InitiatePass: Runtime error occurred while applying unattend answer file; hrResult = 0x8030000b
2015-03-18 15:19:48, Info IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: ------Unattend setting error / warning------
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: Error code = 0x8030000b
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: Pass = specialize
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: Component name = [Microsoft-Windows-Shell-Setup]
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: --------------------------------------------
2015-03-18 15:19:48, Info IBS UnattendErrorFromResults: Error text = Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].
2015-03-18 15:19:48, Info IBSLIB PublishCriticalError: Publishing critical error message [Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].]
2015-03-18 15:55:52, Info [0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for Error published by ErrorHandler
2015-03-18 15:55:52, Info DIAG CallBack_DiagnosticDataSend: Setup was started from Phase 4. Disabling Diagnostics [DiagnosticDataSend] in this scenario
2015-03-18 15:55:52, Info [0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
2015-03-18 15:55:52, Info [0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
2015-03-18 15:55:52, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2015-03-18 15:55:52, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2015-03-18 15:55:52, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2015-03-18 15:55:52, Info PANTHR DeleteCriticalSection for pExecQueue->csLock;
2015-03-18 15:55:52, Info [0x0605a6] IBS Requested UI to hide the language and locale selection pages.
2015-03-18 15:55:52, Info [0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
2015-03-18 15:55:52, Info [0x0601d7] IBS InstallWindows:Error Type = 3211266
2015-03-18 15:55:52, Info [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

I have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application

i have a canon hf10 and need to be able to transfer my video from my camera to my computer so I can burn them to dvd is there a step by step process? i'm new 2 the mac world. I tried downloading imovie 7.1.2 but it said, "An eligible iMovie application was not found in the location /Applications." can anyone give me step by step instructions? i would hate to call the geek squad!!!LOL

and what's a firewire port? how do i know if i have one?

How do I add a step to run at the beginning of an existing task sequence?

I need a way to add a step to run at the beginning of an existing task sequence like you see up above. We need to do so to all task sequences that install software in our environment. I understand PowerShell very well but, I am not sure of how I would modify
(if possible) an existing task sequence, let alone add a step to the beginning.
This is super important and would most appreciated for any help. Thanks! :)
http://i61.tinypic.com/2nlv8zb.png

I understand how to perform the above action. I need to have that in a PowerShell script. I need to insert a "Install Package" step at the top of all 900+ task sequences with a specific package. I am good with PowerShell, just not that good.
ActionInProgress : 1
AlternateContentProviders :
BootImageID :
Category :
CustomProgressMsg :
DependentProgram :
Description : ML - 1/5/15
Duration : 360
ExtendedData :
ExtendedDataSize : 0
ForcedDisconnectDelay : 5
ForcedDisconnectEnabled : False
ForcedDisconnectNumRetries : 2
Icon :
IconSize : 0
IgnoreAddressSchedule : False
ISVData :
ISVDataSize : 0
IsVersionCompatible :
Language :
LastRefreshTime : 2/16/2015 10:18:25 AM
LocalizedCategoryInstanceNames :
Manufacturer :
MIFFilename :
MIFName :
MIFPublisher :
MIFVersion :
Name : TS: Adobe_ReaderXI_11.0.10_R01-Install
NumOfPrograms :
PackageID : P12005DB
PackageSize :
PackageType : 4
PkgFlags : 0
PkgSourceFlag : 1
PkgSourcePath :
PreferredAddressType :
Priority : 2
ProgramFlags : 152084496
References : {
instance of SMS_TaskSequence_Reference
Package = "P1200541";
Program = "Adobe_Cleaner_9_R01";
Type = 0;
instance of SMS_TaskSequence_Reference
Package = "P1200542";
Program = "Adobe_Cleaner_10_R01";
Type = 0;
instance of SMS_TaskSequence_Reference
Package = "P1200598";
Program = "*";
Type = 0;
instance of SMS_TaskSequence_Reference
Package = "ScopeId_5E2F018E-6A55-4DF6-BC64-43B2E205E619/Application_d5c1b17b-12e1-
4ad6-9916-72fdefc834b8";
Program = "";
Type = 1;
ReferencesCount : 4
RefreshPkgSourceFlag : False
RefreshSchedule :
Reserved :
SecuredScopeNames : {Default}
SedoObjectVersion : EF958AC5-D6E3-460E-A666-6A8CAF4AEB8C
Sequence : <sequence version="3.00"><referenceList><reference package="P1200598"/><reference
package="P1200541" program="Adobe_Cleaner_9_R01"/><reference package="P1200542"
program="Adobe_Cleaner_10_R01"/><reference application="ScopeId_5E2F018E-6A55-4DF6-BC6
4-43B2E205E619/Application_d5c1b17b-12e1-4ad6-9916-72fdefc834b8"/></referenceList><ste
p type="SMS_TaskSequence_RunPowerShellScriptAction" name="SDLSetupWait"
description="ML - 2/16/15" runIn="WinPEandFullOS" successCodeList="0" runFromNet="fals
e"><action>OSDRunPowerShellScript.exe</action><defaultVarList><variable
name="OSDRunPowerShellScriptExecutionPolicy"
property="ExecutionPolicy">Bypass</variable><variable
name="OSDRunPowerShellScriptPackageID"
property="PackageID">P1200598</variable><variable
name="OSDRunPowerShellScriptParameters" property="Parameters"></variable><variable
name="OSDRunPowerShellScriptScriptName"
property="ScriptName">SDLSetupWait.ps1</variable></defaultVarList></step><step
type="SMS_TaskSequence_InstallSoftwareAction" name="Purge Adobe 9.x -"
description="ML - 1/5/15" runIn="FullOS" successCodeList="0"
runFromNet="false"><action>smsswd.exe /pkg:P1200541 /install /basevar:
/continueOnError:</action><defaultVarList><variable name="PackageID"
property="PackageID" hidden="true">P1200541</variable><variable
name="_SMSSWDProgramName"
property="ProgramName">Adobe_Cleaner_9_R01</variable></defaultVarList></step><step
type="SMS_TaskSequence_InstallSoftwareAction" name="Purge Adobe 10.x+"
description="ML - 1/5/15" runIn="FullOS" successCodeList="0"
runFromNet="false"><action>smsswd.exe /pkg:P1200542 /install /basevar:
/continueOnError:</action><defaultVarList><variable name="PackageID"
property="PackageID" hidden="true">P1200542</variable><variable
name="_SMSSWDProgramName"
property="ProgramName">Adobe_Cleaner_10_R01</variable></defaultVarList></step><step
type="SMS_TaskSequence_InstallApplicationAction" name="TS:
Adobe_ReaderXI_11.0.10_R01-Install" description="ML - 1/5/15" runIn="FullOS"
successCodeList="0" runFromNet="false"><action>smsappinstall.exe /app:ScopeId_5E2F018E
-6A55-4DF6-BC64-43B2E205E619/Application_d5c1b17b-12e1-4ad6-9916-72fdefc834b8
/basevar: /continueOnError:False</action><defaultVarList><variable name="OSDApp"
property="AppInfo" hidden="true">1</variable><variable name="OSDApp0Description"
property="AppInfo0Description">Valid</variable><variable name="OSDApp0DisplayName"
property="AppInfo0DisplayName">Adobe_ReaderXI_11.0.10_R01</variable><variable
name="OSDApp0Name" property="AppInfo0Name">ScopeId_5E2F018E-6A55-4DF6-BC64-43B2E205E61
9/Application_d5c1b17b-12e1-4ad6-9916-72fdefc834b8</variable><variable
name="ApplicationName" property="ApplicationName" hidden="true">ScopeId_5E2F018E-6A55-
4DF6-BC64-43B2E205E619/Application_d5c1b17b-12e1-4ad6-9916-72fdefc834b8</variable><var
iable name="ContinueOnInstallError" property="ContinueOnInstallError"
hidden="true">false</variable><variable name="OSDAppCount"
property="NumApps">1</variable></defaultVarList></step><step
type="SMS_TaskSequence_RunCommandLineAction" name="Change Reg Key" description="ML -
1/5/15" runIn="WinPEandFullOS" successCodeList="0 3010"
runFromNet="false"><action>smsswd.exe /run: reg add HKEY_LOCAL_MACHINE\SOFTWARE\Classe
s\Installer\Products\68AB67CA7DA73301B744BA0000000010 /v ProductName /d
Adobe_ReaderXI_11.0.10_R01 /F</action><defaultVarList><variable name="CommandLine"
property="CommandLine" hidden="true">reg add HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Insta
ller\Products\68AB67CA7DA73301B744BA0000000010 /v ProductName /d
Adobe_ReaderXI_11.0.10_R01 /F</variable><variable name="SMSTSDisableWow64Redirection"
property="DisableWow64Redirection">false</variable><variable
name="_SMSTSRunCommandLineAsUser" property="RunAsUser">false</variable><variable
name="SuccessCodes" property="SuccessCodes" hidden="true">0
3010</variable></defaultVarList></step></sequence>
ShareName :
ShareType : 1
SourceDate : 1/5/2015 10:14:08 AM
SourceSite : P12
SourceVersion : 1
StoredPkgPath :
StoredPkgVersion : 1
SupportedOperatingSystems : {}
TaskSequenceFlags : 0
Type : 1
Version :

HT4914 if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded t

if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded to iTunes match?

Welcome to the Apple Community.
iTunes match won't automatically remove content from your computer, if you want to do that you will need to do it manually yourself.

I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

Prep the new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

Is there a step by step somewhere for using the iCloud Beta?

Windows 7 64bit / iTunes 10.4.80
Is there a step by step somewhere for using the iCloud Beta? I assume we can activate it after reading Apple advertizing on the Beta and 10.4.80. I don't see anything on iTunes that would get me there - Thank you for your help - IM

Thank you for the assistance, I greatly appreciate it!

If I configure a buffered pattern input and a buffered pattern output on the 6534 to both operate from the internal clock, will data be transferred out on the same rising edge as data is transfered in or are there two separate oscillators?

Basically, I want to perform a buffered pattern output synchronously with a buffered pattern input. If I configure the two groups to be internally timed from the same frequency, will the data in be transferred on the same edge as the data out or will the two groups use different oscillators?

Hi Joseph,
There are two clocking structures on the 653x boards, one for each group. This means, even if you specify the exact same frequency for both there is no guarantees that they will be synchronized exactly.
The workaround for synchronizing both groups is to have 1 group clocked internally and 1 group to be clocked externally. Then route the Req line from the internally clocked group to the Req line of the externally clocked group.
Hope that helps.
Ron

Hi there, I have an older version of 10.5.8. What is the next step to upgrade to the latest version of 10.9 Maverick

Hi there, I have an older version of 10.5.8. What is the next step to upgrade to the latest version of 10.9 Maverick?
Thanks in Advance

If yours is a PPC iMac (G4 or G5) you cannot upgrade further.
If it is an Intel iMac:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

To pass parameter values to the object reference of action step in sequence file of teststand programatically using C#.

//Initialize the Engine
            EngineClass myEngine = new EngineClass();
            myEngine.LoadTypePaletteFilesEx(TypeConflictHandlerTypes.ConflictHandler_Prompt, 0);
            Step myStep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname,StepTypes.StepType_Action);
            myStep.Name = "object";
            DotNetModule dotnetmodule = myStep.Module as DotNetModule;
            dotnetmodule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File,@"C:sequence.dll");
            dotnetmodule.ClassName = "CN";
            dotnetmodule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
            dotnetmodule.MemberName = "ISI";
mySequence.Locals.NewSubProperty("object", PropertyValueTypes.PropValType_Reference, false, "", 0);
Sequence mySequence = myEngine.NewSequence();
            mySequence.Locals.NewSubProperty(varName, PropertyValueTypes.PropValType_Reference, false, String.Empty, 0);
mySequence.InsertStep(myStep, 0, StepGroups.StepGroup_Main);
            SequenceFile seqFile = myEngine.NewSequenceFile();
            seqFile.InsertSequence(mySequence);
seqFile.Save("C:\\mySeq.seq");
I have done this,dynamically creating a sequence file in teststand programatically through c#.
Problem is
1.I created an action step and object Reference variable for the step, but i am not able to pass parameter values to the objectReference
2.I am not able to load the sequence in to the main Sequence of the sequence file in the teststand. How can I do these two things.

Hi,
have you ever followed on my Links ?!?!?
If not please jump to this one
http://forums.ni.com/ni/board/message?board.id=330&thread.id=26880
and read the the answer from Mannoch
starting with this words:
Anthony -
Currently, functionality for retrieving the Metadata Token for a class constructor or member is not fully provided in the TestStand .NET Adapter API. The DotNetModule.GetConstructorMetadataToken() and DotNetModule.GetMetadataToken() methods only return the correct Metadata Token when the member/constructor prototypes have already been loaded. Thus, in the case of your code, when you call DotNetModule.GetMetadataToken(), the method is returning -1 because the member prototype for the Step you are referring to has not yet been loaded.
That means have to do a workaround for your stuff.
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Is there a Step pattern sequencer in the Logic's Arpeggiator

Similar Messages

Maybe you are looking for