Is there a straightforward way to install a 10.8.5 recovery partition on an external firewire drive?

Ideally one that is not hardware specific? 

If you installed a complete OS to the Firewire Drive it would normally install a recovery partition - after that you coud use disk utility to trash the OS on the drive and leave the recovery partition intact.
Longer and more involved than Recovery Assistant but would achieve the result you are wanting. 
About the requirement to be hardware independant - I am not sure.

Similar Messages

  • I just migrate settings and software from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install.

    I just migrate settings and software, include CC, from my PowerBook to a new Mac Pro. All the software download from CC is there and working, except for CC, and there is not way to install. I have try because every time I restar keep bothering asking for installation, (by the way, the link is not up to date). Will appreciate your help.

    never migrate adobe software.  it should be properly installed.
    uninstall all the cc programs you can, clean and then reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Mountain Lion won't install on 10.7.4. Suggestion from Apple is to completely erase harddisk and install Leopard Snow Leopard Mountain Lion. Is there no other way to install Mountain Lion

    Mountain Lion won't install on 10.7.4. Suggestion from Apple is to completely erase the harddisk and install Leopard > Snow Leopard > Mountain Lion.
    Is there no other way to install Mountain Lion?

    I tried and failed for several hours to install Mountain Lion, and was repeatedly getting the "Recovery System" cannot be created error.  I tried all the tricks: resizing the drive partition, booting from an external boot drive, all to no avail.  After reading other users struggling with the same issue, I had determined it to be a boot camp drive error.  However, I didn't want to have to erase and begin anew when I came upon a possible solution.  I had long ago renamed my boot camp drive with a "." (".windows" for me) in order to avoid having the partition show up on my desktop.  So, I boot into windows and renamed the c: drive without the "." ("windows"), and reboot into os x.  The install then went off without a hitch.  I hope this will be helpful for others struggling with this issue that may have renamed their boot camp drives in a similar manner.

  • Is there the third way to install application onto iPhone device ?

    Hi guys,
    It seems there are 2 ways to install application onto iPhone now,right?
    The first method is download it from App store/ Ad hoc after application distribution.
    The other way is that tie the iPhone device UDID to App ID of iPhone developer, then download and add the available Development Provisioning Profiles onto iphone,then build and debug application using connected iphone device in the Xcode.
    I want to know wether there is the third way to install application onto iPhone device?
    Sf so,anybody can tell me how to do ? or give me some suggestion?
    thanks!

    The other ways would envolve jailbreaking the phone which cannot be discussed on these forums.

  • Is there an alternative way to install Firefox on my mobile?

    Trying to download Beta for Android onto my Galaxy S get error message "item not found". Tag reader gives same message. Downloading to PC and then install on mobile is not possible. Is there an alternative way to install Firefox on my mobile? TNX! Kaie

    If you have a compatible device without Android Market access, you can download Firefox directly from our FTP server. See the instructions here for details: https://wiki.mozilla.org/Mobile/Platforms/Android

  • Is there a way we can change the path of the songs to an external hard drive when we move the songs over?   also, is there a way to delete multiple songs easily?

    is there a way we can change the path of the songs to an external hard drive when we move the songs over?   also, is there a way to delete multiple songs easily?
    I recently moved my songs over for hard drive space.  Really don't want to have to go back through each album, etc... to get that to work.
    Last time I tried making a "library" that didn't work either.
    On the topic of deleting multiple songs that are the same, is there an easier way then to select each one?
    Seems to me apple isn't user friendly

    Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
    A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
    Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
    Also, I'm not a lawyer so don't take this as legal advice.

  • Trouble with installing 10.5 from an external firewire drive

    I have a family pack of 10.5 and installed it just fine on my macbook. But, I'm having trouble getting my imac DVD player to read the DVD. It just spins and spits it out, and spins and spits it out. The imac is not covered under applecare so spending money to get the DVD drive fixed (which I barely use) is not something I want to do right now.
    Anyway, I followed instructions on a this website to install 10.5 from an external firewire drive. (http://iuseapple.com/blog/apple-how-to/advanced-os-x/2007/10/29/how-to-install-l eopard-from-external-firewire-hard-drive/)
    But I get stuck and am not able to actually get my imac to boot from the installer. Basically, I am able to use disk utility to create a copy of the disk image on my macbook. That resulting file ends in ".cdr" and it mounts when I double click it.
    And I partitioned my firewire hard drive without problems.
    I think I'm messing up when it comes to doing the restore. If I try to drag the .dmg mounted file in to the "source" it doesn't work (is greyed out). If I try to drag the mounted .dmg there than it works, but I get an error when I click "restore" (something about scans and images not being found). I tried physically copying the .dmg file onto the partition, but then when I plugged the HD into my imac, I wasn't able to get the imac to boot from the installer.
    What am I doing wrong? If someone could walk me through these last steps I'd appreciate it!

    Okay I finally got around to creating the bootable disk image of 10.5 using Carbon Copy Cloner. Still my iMac is not booting from the firewire drive!
    Here's a recap of everything I've tried. I'm at a complete loss now!
    - I partitioned the HD into 2 partitions-- a 10gig one for the 10.5 install, the then the rest for Time Machine. I make the partition in Disk Utility on my MacBook.
    - I've partitioned the drive a few times-- always partitioning it in APM format (b/c it needs to boot my non-intel iMac).
    - I've created the disk image using "restore" in disk utility. I've again tried this a few times.
    - I am able to boot my MacBook from the disk image I create! So I know the FW drive is able to be used to boot from!
    - Here's what I've tried in terms of getting the iMac to boot from the FW drive. It always just boots to my internal drive instead. Sometimes I briefly see a folder and question mark. I've tried all 3 FW ports. I've selected the install partition at start up in preferences. I've also held down the option key at start up (only my internal drive shows) and I've held down command-option-shift-delete and again I get the question mark and it boots to my internal drive.
    - And I installed Carbon Copy Cloner and made the disk image that way on my macbook. Still, I tried everything and the iMac is not able to boot from the firewire drive!
    Since my DVD drive is broken, this is the only way for me to install 10.5! Help!

  • Application install onto external Firewire drive

    hi,
    I have an external firewire drive and was wondering why I cannot install some applications to this drive. I would like to do this to keep the main disk as free as possible.
    Some apps don't seem to care where they are installed and some do, so there must be some way to do this. And this is place to get that answer!!
    Thanks in advance!!
    BCA

    Oops. I meant Alias instead of link.
    Create a directory on the external called Applications then select it and choose File -> Make Alias in the finder. Replace the Applications folder on your main drive with the alias you just created (this might require admin rights) and then the Applications directory will always reference the directory on the firewire drive.
    You probably want to move the contents of the original Applications folder to the firewire drive before replacing it with the alias or you'll have to reinstall.

  • Blue Screen Result When Installing To External Firewire Drive

    I can't afford to have problems with programs not running on Leopard on my 17" G4 1.67 GHz 2 GB RAM PowerBook so I am trying to install it on an external Firewire drive. I was hoping to test out Leopard with certain applications by running it from the external drive.
    The Firewire drive has two partitions, one has my backup clone of the PowerBook and the other just has files and about 35 GB of free space. The installation would be a new installation so none of the files that deal with login or Application Enhancer that are being talked about in other threads are an issue.
    My first attempt to install brought up a blue screen after the installation restart. I left it there for about 30 minutes then powered off the PowerBook by holding down the power button. I started it again and held down the option key, picked the install disk as startup, went through the disk utility repair disk (found no problems). After that I picked the new install on the external from the startup preferences and it simply restarted to a blue screen. I left that one for about 20 minutes then powered down.
    I went back to the Powerbook Tiger OS system, deleted all the installed folders on the external and tried a completely new install. Once again it went to the blue screen after the Leopard install restart. This time I left it overnight and this morning the display was dark and upon waking it up with a tap of the space bar was greeted by the bluescreen again.
    I talked to my Apple hardware rep who knows the equipment that I am working with and we talked about all the steps I went through and he has no explanation why it won't work on the external.
    I would love to hear from anyone that may have insight for this particular external FW drive installation perspective.

    Joe-
    Is the drive partitioned to APM? (Sorry I took Anton's reply to be yours.) What was the type fo partitioning onthe disk with the success? I am not knowledgable enough in those error messages on the system.log file, but one thought is - after the memory upgrade, did you clear the PRAM (long shot, but do it anyway)? The machine booting on one external Firewire drive (#2) implies the problem is with the external FW disk (#1) you are using. Some other people had the bus error, but with Time Machine. (Not to go on a tangent, but TM seems to have problems when the disk name has non-alphanumeric in it.)
    Hoping someone who knows the syslog errors and the boot sequence will pipe in here.

  • Installing on External Firewire Drive

    Hi-
    My Mac has started doing some funny things recently; I cant connect any USB devices, MobileMe refuses to let me delete any items from my iCal and other little irritations.
    I have an external 4Tb Firewire Drive which has loads of space on it free, so I want to do a complete re-install of OS X and boot from from the external drive. I can then reinstall my apps and stuff bit by bit and see what is causing the problems.
    The question is: when I install the system onto the FW drive, will it erase what is already on there? I have some important work on it and don’t want to lose it! Does the installer need a ‘clean’ disc to install?
    Thanks, Andy

    Disk utility's Restore function (and other copying apps such as CCC) will make a bootable installation of Snow Leopard on an external firewire drive that already contains data. Just remember not to check the erase disk option for the firewire drive.
    It's most convenient if you first collect all your user material on the firewire drive into one folder. And there is possibly a risk of something bad happening if some files in your user material have names identical to the names of files in the Snow Leopard installation. That may be unlikely. But you'll have to judge that.
    If that worries you, before you do the Snow Leopard installation on your firewire drive, you can use disk utility to repartition your external drive without erasing any of its data. See this: http://www.peachpit.com/articles/article.aspx?p=1395749. With such a large firewire drive, a number of partitions would seem desirable.
    Then you can install a bootable Snow Leopard on an empty partition of the firewire drive for which you do check the erase disk option. With that option checked, the copy is performed as a block by block copy. Otherwise it's performed as a file by file copy. The block by block copy goes faster and is supposed to be identical in all respects to the original. That's not so with the file by file copy -- though both provide equal functionality.
    Your firewire drive should be partitioned GUID. You can use APM (and the copy will still be bootable) but you will not be able (I've read) to install Snow Leopard updates. You can't, alas, change the partitioning scheme without erasing your firewire drive.
    Message was edited by: Roy Vincent
    Message was edited by: Roy Vincent

  • Best Way to Protect Data on External Firewire Drives?

    I have a number of external firewire drives on my IMac and like many others have experienced data loss due to various things.
    What I've just started to do is use certain of these drives, external USB drives too, just for backup, not to work on. I put the video work on there each day and then dump the drive in the Trash, turning it off, so that their files can't be corrupted.
    With my other firewire drives I do the same: dump in the trash and turn the drives off. I don't unplug the firewire cables, just dump the drives in the trashcan and turn them off. When I want to use a particular drive I turn it on and it comes up on the desktop.
    I have at times restarted and then powered the external drives on.
    My question is: which is the safest way to do this? is it okay to trash a drive, turn it off and then switch it back on when needed?
    Thanks so much for any help!

    I have been doing what you describe for years now, and have never experienced a problem. When the drive is not needed for a while, I eject it and power it off. You can also disconnect it from the Mac and unplug the drive physically, if you want extra "protection" against, say, a power surge or some other malfunction that might damage the powered off (but still connected) drive, but I would think those types of events are very highly unlikely.
    People might debate whether the risk of wearing out the firewire or USB ports from repeatedly inserting and removing the cables is greater than the risk of some damage when connected to the Mac but powered off. Either one is infinitesimally small, I believe, and neither has probably been accurately measured.

  • Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

    Had Photoshop Elements 12 on my other Mac that recently got smashed, new one has no CD drive. How do I install Elements with my product key? Purchasing an external CD drive is not an option at this time after forking over the 2500 for the new Mac...

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can I install OS 9 on an external Firewire drive?

    I am not sure if this belongs in the G5 thread or the Leopard thread. Anyway:
    I have a Mac G5, running Leopard 10.5.4.
    I understand that Leopard will not run Classic applications.
    *However, can I install OS 9 on an external Firewire drive? And just boot directly from that drive?*
    I have essential OS 9 apps that I really need to keep.
    I am aware of Classic emulators that run under Leopard, but that is not an option.
    Any advice, insights, suggestions, et cetera in this matter will be appreciated!

    +PS  I should have added for the sake of others reading this thread…+
    You, Dunestrider, can run your Mac in Tiger (and hence in Classic) because, AFAIK, your G5 originally shipped with Tiger.
    Others should be aware that you cannot boot a Mac with an OS earlier than the one with which it shipped, i.e. if your Mac shipped with Leopard you cannot do what I suggested in my previous post. See this Apple doc.
    Also, Dunestrider, I just realised belatedly that you won't have to buy Tiger - you will still have the original Install disk(s) that came with the G5.
    Andreas

  • Is there an easy way to install Windows 7

    I'm using Bootcamp and already have Windows XP install as a second OS. I've pre-ordered Windows 7 several months ago and now I have it in hand and would like to replace Windows XP on my iMac.
    Though I may not use Windows 7 very much (I'm very pleased with my Apple OS), I would still like to install it.
    Is there an easy way to erase the partition that has Windows XP and install Windows 7 instead? How can I do this without touching the Apple OS in fear that I might currupt it in some way?
    Thanking you all in advance,
    Chippathingy

    You should considering using VMware Fusion, Parallels Desktop, or Sun's VirtualBox (which is free). Then, you won't have to dedicate a whole partition to Windows. And Windows will be running alongside Mac OS X, so on those less frequent occasions when you need to use a Windows program, you will not need to restart. Plus you can import your existing Windows XP installation as a virtual machine (I don't know if VirtualBox has an import feature), and have a separate virtual machine for running Windows 7, again with no separate partition; you can even have a virtual machine with one of the Linux'es.

  • Is there way to install OS and drivers without recovery CD?

    Hi...
    I installed my notebook with the recovery cd...
    but i get disappointed because it installed a lot of unusual programs...like aol, sonic-pro, games...
    is that a way to install windows and drivers only ?? without this boring programs ???
    i don't want to uninstall after instalation...it's not the same thing...

    Hi
    I cant understand user who bye a high performance notebook with many different features and then will not use this functions. Of course, on the Toshiba recovery CD you will find the OS and all Toshiba drivers and utilities. Without this drivers and tools and utilities you will be not able to use the additional Toshiba functions.
    But as in the previous posting mentioned you can install the fresh Windows OS and then you can install the drivers. But the easiest way is to use the Tosh recovery CD and then if you want you can remove some applications.

Maybe you are looking for