Is there a subwoofer I can use with my existing iMac internal speaker setup?

Hi!  I'm wondering if there is a subwoofer I can use with my iMac. I want to use the internal speakers for the low, mids and highs and route the freq below 80k to the subs. Anyone done this? Thanks!

I did not purchase what i found, but, here's a subwoofer that might suite your need.
BassJump 2 by www.twelvesouth.com
Let me know if that works for you.

Similar Messages

  • ITunes is totally frozen with multiple paints of same screen within itself. Also incredibly slow. Are there alternative players I can use with my iPhone, or must I use iTunes with my iPhone? iTunes is effectively unusably slow.

    iTunes is totally frozen with multiple paints of same screen within itself. Also incredibly slow. Are there alternative players I can use with my iPhone, or must I use iTunes with my iPhone? iTunes is effectively unusably slow. I am using Windows 7.
    I only use it once every few weeks and each time it is more disappointing than the previous time. does it run better on a Mac than Windows? Is this app really the future of media? Really?

    I am using iTunes 11.1.3 -- The most recent version. When I select something from my albums it just freezes. I have restarted it a few times with same result.

  • Is there a switch I can use with thunderbolt display and 2 computers

    I have the new Mac Mini and the new Macbook Air plus the 27 inch thunderbolt display.  The majority of the time, I will be using the thunderbolt display hooked up directly to the Mac Mini.   I have already tested the theory that if I turn off the Mac mini, I can use a separate thunderbolt cable to hook to the port on the back of the display and to the port on the Air and have it show up on the screen.   Many people said this was not possible as the port on the back of the display was only unidirectional and to be used for thunderbolt accessories like hard drives.   It actually works quite well and so at the very least, I can leave the cable plugged into the back of the display and use it with the Mac Air if I turn off the Mac Mini.   At least I don't have to remove the cable from the Mac Mini and move it over to the Mac Air.  I actually looked at the Kanex switch which would do what I wanted it to do, but unfortunately it says it will NOT work with the thunderbolt display.   Apparently it only works with the Cinema display.  Does anyone know if there is a thunderbolt switch out there?
    Thanks

    Thanks, Clinton....that's what I was thinking too.   On the upside, I don't have to remove the actual thunderbolt display cable going to the back of the Mini, I just have to keep a cable in the output port on the back of the display for my Macbook Air.   Then I just turn off the Mini, plug the cable into the Air and I'm ready.   What I find interesting though is that the Kanex "looks" like it will do exactly what I want it to, but apparently it will only work with Mini Display port like that found on the "cinema display".  Maybe one day........     
    Thanks again!

  • Is there an app you can use with iphoto to add ghosts to pictures

    I am trying to find an app to use with iphoto to add "ghosts" to existing pictures.. does anyone know of any?

    photoshop?

  • I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

    I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

    That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
    Your only options are to use something like ScreenRecycler mentioned above.
    ~Lyssa

  • My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11".  The MBAir says that this version of Airport utility doesn't support this base station.  Is ther any chance I can use this with my MBAir?

    My airport express works on my MBPro 17 w/ 10.5.8 but not my MBAir11".  The MBAir says that this version of Airport utility doesn't support this base station.  Is ther any chance I can use this with my MBAir?

    Is this an older "round" version of the AirPort Extreme? If yes, it is true that AirPort Utility 6.x no longer supports the older AirPort Extreme and AirPort Express models.
    A model number......located on the bottom of the Extreme or on the side of the Express would be helpful to confirm what you have.
    Apple probably does want you to buy a new AirPort Extreme.
    The workaround might be to use a Mac or PC running a 5.x version of AirPort Utility.
    A more complicated workaround would be to install AirPort Utility 5.6 on Mountain Lion.  This is not supported by Apple......it does work for me.....but may not work for you. See this article for more details:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Is there any way I can use Skype Number with Viber...

    Hello. With my Skype Number is there any way I can use it with Viber? So I give my Skype NUmber to a friend and they add me on Viber? Or do I have to divert my skype numebr to my actual number?

    Hi, if you give your Skype number to your friend they can make a Viber Out call to that number if they have some viber credit. Calls to landlines are usually cheap but it depends where in the world your friend is calling from.
    Have you got a Viber account too ? Viber to Viber over the Internet is free, like Skype to Skype being free. Persoanally I have both networks now.
    Viber is on smartphones, some feature phones and there's a desktop app too. Your Viber account is based upon the mobile number you register and Viber recognises phone numbers of your contacts to see if they're registered on Viber too.

  • My pause forward and backwards button wont work. Are there any handicaps that i can use with the middle button?

    My buttons dont work and i wanted to know if there are any substitues that i can use with the home button.

    Nope, it either needs to be plugged in or turned on with the power button.
    A replacement iPhone 4 is $149, but at least the whole phone is replaced.

  • How do I "import" and "sync" my "google" and "safari" "bookmarks" to my new "iPad" from my "macbook"?    Is There A Way I Can Use a "Stylus" With My New "iPad" I've Got "Mobility" "Disabilities"?

    How do I
    "import" and
    "sync" my
    "google" and
    "safari"
    "bookmarks"
    to my new "iPad"
    from my "macbook"? 
    Is There A Way I Can Use a "Stylus" With My New "iPad"
    I've Got "Mobility" "Disabilities"?
    <E-mail Edited by Host>

    You can use iCloud to sync your Safari bookmarks between your Mac and your iPad.
    Instructions here >  Apple - iCloud - Learn how to set up iCloud on all your devices.
    Personally, I like the Wacom stylus for iPad >  Amazon.com: Wacom Tech Corp. Bamboo Stylus for iPad/Tablets: Computers & Accessories
    And try the accessibility features on your Mac. Open System Preferences > Accessibilty
    Apple - Accessibility - OS X
    I just noticeed on your other thread you mentioned that you've had your Mac for seven years so iCloud for syncing bookmarks may not be an option for you unless your Mac at the minimum is  running v10.7.5 with at Safari 5.1.1. See, "Bookmarks" >   System requirements for iCloud

  • HT201335 Is there an  app that I can use with apple TV to mirror my older Mac Book Pro ?

    Is there an  app that I can use with apple TV to mirror my older Mac Book Pro mid 2009? If not is there a software patch that will allow me to mirror ?

    In my own opinion it didn't work well enough and I don't use it, I have fairly high standards when it comes to stuff like this. But from what I can gather it seems like it's the best of the rest! many here have said they like it.
    There used to be a trial period, but I couldn't say whether that's still available.

  • I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog.  Is there any way I can use the apple tv on analog cables?

    I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog.  Is there any way I can use the apple tv on analog cables?

    Welcome to the Apple Community.
    It's do-able, but I don't think it's a great idea.
    DVI
    Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
    Analogue
    There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
    HDCP
    HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
    Resolution and aspect ratio
    I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
    DAC
    DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

  • Is there a program I can use to retrieve corrupted .MOV files, from a HD memory card where some files will open, and others wont?

    Hi,
    I have a Mac OS X version 10.6.8 with a 3.06 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.
    I have recently shot some still and moving footage on my Cannon EOS 500 D (digital camera) using an AMICOE SD C10 8 GB high speed memory card.
    After uploading these photos and movies onto my Mac, I am only able to open about 2/3 of the files that appear on the screen.  In the case of the movie files, I can see a number of the file icons, however about 1/3 of them will not open (I get a message saying that Quicktime does not recognise this file - yet it is a .MOV file. Interestingly I can see a small thumbnail for each of these files that will not open, however I am unable to expand the thumbnail into the larger size) and there are a number of photos that simply do not appear as a file or thumbnail.
    Is there a program I can use to retrieve these corrupted .MOV and JPEG files from either my computer or the memory card?
    Thank you for your interest in this question.
    Cheers,
    Shaughno.

    ....to add to the last part... When adding to the iTunes library,- I need iTunes to make a quick-scan to verify that media I am adding isn't already in there,- preventing duplicates that make remedial tasks of removing* duplicates so annoying and unproductive...

  • Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
    Thanks
    Jeff Pulera
    Safe Harbor Computeres

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have Acrobat 9.5 and when I try to create pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

    I have Acrobat 9.5 and when I try to create>pdf from scanner, it displays an error "Adobe acrobat has stopped working". Is there any way I can use this functionality?

    Provide you have Acrobat 9 installed in an OS for which Acrobat 9 is compatible then you can use the functionality.
    As well, you need a scanner connected, powered up, and the software installed. Acrobat 9 "prefers" TWAIN drivers.
    Always visit the scanner vendor's site and download - install the latest greatest software.
    n.b., The Acrobat 9.x product family passed into "End of Support" mid-year 2013.
    As well the Acrobat 9.x product family is not compatible with contemporary OSs.
    Be well...

Maybe you are looking for