Is there a System Menu for special Functions, like WIPE CACHE?

On my DX, there was a method of pressing and holding the Menu button & Power up button to get to special "Systems" functions like WIPE CACHE & FACTORY RESET. Does such a procedure exist for the Razr ?  I know about SAFE MODE and was able to see that work. (Although my finger hurt having to press the up/down Volume buttons for so ling. )

While I have done this quite a few times (and this has made my phone a bit more responsive when it gets sluggish) you should be careful and watch what you are doing. If you select the wrong menu option you may end up having to contact Verizon for support.
Wiping the cache partition
Power the phone off
Press and hold the volume down, volume up and power button until the recovery screen appears.
Use the volume down button to select "Recovery" and then press the volume up to confirm the selection.
The phone will do a little reboot thing, display the dual core logo thing and then an Android next to a triangle with a yellow exclamation point will appear. At this point press the volume up and volume down buttons at the same time.
If you did everything correctly you are now at the Android System Recovery Screen. To clear the cache press the volume down button until you have selected "wipe cache partition". Press the power button to confirm the selection and it will wipe the cache partition.
Once the cache is cleared press the volume up button to select "Reboot System Now" and press the power button to confirm the selection. If the "Reboot System Now" is already selected then just press the power button to confirm the selection and the phone will reboot.

Similar Messages

  • There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.

    Hi All,
    i created one  enchancement to ME21n screen,
    i added one screen at header
    When i running the the transaction ME41 it shows the following error.
    This function not defined
    Message no. 06006
    Diagnosis
    There is no entry for this function in Table 168F (system table). An error involving the screen control has probably occurred.
    Procedure
    Contact your system administrator.
    Am i need to add this functionalty to any  sap table.
    plz guide me on this.

    Hi Krishna
    Have you added any buttons in the custom screen if yes then you will have to maintain configuration data for Function code processing.
    Please search on SCN for the same
    Nabheet

  • Is there any system variable for this date format 01/21/2004 18:00:32

    Hello,
    Is there any system variable for this date format 01/21/2004 18:00:32
    This is my Internal date format and my External date format is sy-datum.
    How can I validate....any suggestions will be apprecaited!
    Regards,
    Kittu

    Hello,
    Thank you very much for your response!
    My internal date format is 01/21/2004 18:00:32
    and external date format on selection-screen is sy-datum.
    My external format is stored in S_crtsp
    and internal format is stored in L_crtsp. (01/21/2004 18:00:32)
    I want to remove the time from the internal format and validate it aginst the external format.
    Any suggestions or brief explonation is appreciated...I apprecaite the help soo far...
    Regards,
    Kittu

  • HT5815 im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

    im searching a for a update there makes it possible for mac computer with OS X To play games there aren't Supported for power pc, Like Warcraft 3, Diablo 2 and those kind of old games there worked on the previous versions of the OS

    Here is a thread for you: Is there any possible way to run PPC...: Apple Support Communities

  • When we there be an app for the iPhone like the "drive mode" on the android?

    When will there be an app for the iphone like the Android's "drive mode"?

    Siri  http://www.apple.com/ios/siri/siri-faq/
    She won't announce who is calling but she can read your text and emails.
    YOu should create ringtones for your specific contact list.

  • How can i restore the deleted accidently bookmarks ? is there trash or bin for deleted bookmarks , like opera browser ?

    how can i restore the deleted accidentally bookmarks ? is there trash or bin for deleted bookmarks , like opera browser ?

    If you have accidentally removed bookmarks then use "Organize > Undo" in the bookmarks manager (Bookmarks > Organize Bookmarks) to get them back.
    The Organize button is the first of the three buttons on the toolbar in the Library (Bookmarks Manager).
    That only works if you haven't closed Firefox.
    Otherwise you need to restore the bookmarks from a JSON backup.
    That will replace all the current bookmarks and you lose bookmarks that were added since that backup was created.
    See http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • Output for special functions

    Hi
    For all the output typesd I need to use transmission medium 8( Special function).Kindly let me know what is purpose of special functions and where to see output of the form.
    Points will be rewarded.

    Hi,
    Some info, in case it helps.
    I had a requirement to use two different SAPscript forms for printing sales invoices (one for normal invoice printing and the other for in a program for printing dunning letters plus their invoices).
    So in the IMG (transaction V/40) I set up processing for transmission medium 8 just like what was already there for transmission medium 1, but with the other SAPscript form.
    In our program, NAST-NACHA is set to 8, and a call is made to the appropiate form (e.g. einzelnachricht_ohne_update) of program rsnast00 in order to print.  This picks up and uses the config (the print program, SAPscript form etc) for transmission medium 8.
    Used in this way, 8 seems to work just like 1, except 1 is used by the regular processing but 8 by our custom program.
    John

  • Is there a RoboHelp shortcut for toggling case, like Shift-F3 in Word?

    In Word I often use Shift-F3 to change the case of selected text, toggling between Initial Caps, ALL CAPS, and lowercase.
    Is there a way of achieving the equivalent In Robohelp?
    My muscle memory works for other shortcuts, like CTRL-K for a link, which are common between Word and RoboHelp (and other apps, such as Excel), but it fails on this one. I'd be happy to retrain it if there was a new shortcut to learn.
    (I watched @Maxwell Hoffman's  webhinar on RoboHelp shortcuts, but it didn't include one for this.)

    Sorry but it is a macro solution. Also using a macro does not actually change the text, instead it applies a span tag so that it displays as required. Thus iPad would appear as IPAD but the HTML would achieve that by applying a span tag. That will be ignored if you have generate printed documentation and there you would still get iPad.
    I think you would be better off reverting to fixing the problem in Word first.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Searching for Calculation function like "@TONUMBER()" (Business Rules)

    Hello,
    I am searching for a calculation function like "@TO_NUMBER()" or a workaround.
    My current problem is as follows:
    @CONCATENATE("AAA_",(@SUBSTRING("BBB_2010",4) - 1) doesnt work --> SUBSTRING function returns "2010" (as STRING value, but then I cannot substract 1).
    Besides I am missing another function like @TO_STRING(), too, because @CONCATENATE("AAA_",2010) doesnt work - @CONCATENATE expects STRING and not NUMBER.
    Can anybody help?
    Thanks & kind regards
    André

    Hi Krish,
    thanks, but I would like to avoid using cdfs...
    I have another idea, but it doesnt work, too (I opened another thread):
    calculating with temporary variables doesnt work - does anybody knows the reason (and have a workaround for me)?
    Herewith my code:
    VAR varLoopAmount = 15;
    VAR varShiftValue = 1;
    LOOP(varLoopAmount)
    "Schadenquote BOZ" = "Schadenquote BOZ" + @SHIFT(&GCS_SchwaRue_Historie,varShiftValue,@ICHILDREN(&GCS_SchwaRue_Historie));
    varShiftValue = varShiftValue + 1;
    ENDLOOP;
    error message: Detail:(1012004): Invalid member name [varShiftValue]
    Thanks for help
    André
    Edited by: user10660408 on 04.06.2010 12:25

  • Is there any System setting for Update statement

    Is there any setting for update statement related to implicit commit because Update statement in my code behaves differently in different systems.
    My code is
    Data:  it_eaus like eaus occurs 0 with header line,
            wa_eaus type eaus.
    select * from eaus into table it_eaus where auszbeleg = '000000000001'  and storausz = 'X'.
    if sy-subrc = 0 .
    wa_eaus-aedat = ''.
    wa_eaus-aenam = ''.
    wa_eaus-storausz = ''.
    modify it_eaus from wa_eaus transporting aedat aenam storausz where auszbeleg = '000000000001'.
    update eaus from table it_eaus.
    endif.
    Data:  it_eausv like eausv occurs 0 with header line,
            wa_eausv type eausv.
    select * from eausv into table it_eausv where auszbeleg = '000000000001'  and storausz = 'X'.
    if sy-subrc = 0 .
    wa_eausv-aedat = ''.
    wa_eausv-aenam = ''.
    wa_eausv-storausz = ''.
    modify it_eausv from wa_eausv transporting aedat aenam storausz where auszbeleg = '000000000001'.
    update eausv from table it_eausv.
    endif.

    Hi
    It isn't an alternative way: u can only explicit the COMMIT just as I said before:
    Update DBTAB set COL.
    COMMIT WORK.
    Anyway just I said before the debugger can execute a COMMIT, from SAP help:
    The New Debugger can run in exclusive and non-exclusive mode. Exclusive mode means that the application that is being analyzed exclusively occupies a work process of the application server during debugging. In non-exclusive mode, the Debugger functions are limited. In non-exclusive mode, after each Debugger interaction, the system requests a roll-out in the application. Therefore, an implicit database commit must be executed. This has the following consequences:
    u25CF      Debugging is not possible between the statements SELECTand ENDSELECTbecause the database cursor needs to be closed when using an implicit database COMMIT statement.
    In this case, program execution is terminated.
    ·        Debugging is not possible for conversion or field exits.
    ·        Due to the implicit database commit, inconsistent datasets can occur in the database.
    For this reason, non-exclusive mode is not possible in productive systems.
    Max

  • Are there certain system requirements for Pro Res Rendering?

    Wondering if there has to be some kind of codec? or possible system capability to render out in Pro Res 4444 @ 29.97fps?
    Thoughts?

    Huh, that is odd. Doesn't even say you ain't got it ... although at this point I would check on how to check if you're got ProRes installed on your system. A question ... do you have Quicktime as the "Pro" (paid) version or simply the free version?
    Neil

  • I do not have any device associated with my Apple ID (any more), but would like to associate my iPhone and my iPad. In the Account Information of my Apple ID, there is no menu for Manage Devices (as there are none connected). How can I associate them?

    I appreciate your help.

    Thanks for answering. Sorry for my ignorance and basic knowledge, Chris CA, but
    1. I do not want to buy iTunes Match.
    2. I thought associating is e. g. necessary when you would like to be able to localise your device via iTunes on your PC.
    3. I suppose that the association has something to do with your rights on which devices and PC you can play your downloaded items.
    Any clarification is welcome.

  • How to set my System Property for frmall.jar like !

    I have a JAR file named SecAuth.jar in ORACLE_HOME\forms\java\ directory.
    I configured this JAR file in ORACLE_HOME\forms\server\formsweb.cfg file archive tag. Like,
    archive=frmall.jar,SecAuth.jar
    Its working very nice.
    Now I need to give a System Property to one of the Class file in the SecAuth.jar !
    Actually my System Property is,
    -Dproject.system.securityFile=C:\client\security.properties
    How can I do this sir ? Can someone help me ?

    Try looking in the $ORACLE_HOME/opmn/conf/opmn.xml file. You'll see a set of process definitions that correspond to the OC4J instances you have configured. There should be a "start-properties" or some similar element to that, in which you can place your required System property. There should be examples of properties in there already.
    When OPMN starts your OC4J process, it will pass it the System property you set (along with all the other ones that were already there).
    -steve-

  • Is there any solution for scanner functions in windows8 consumer preview yet? I use HP 8500A AOI

    HP 8500 AOI
    Toshiba Satellite P755
    Windows 8 Consumer Preview
    New Install of W8
    Want to know if there is a solution for scanner functions for the HP 8500 in W8.  I understand it is new beta OS and all drivers are not released yet.  I have no problem with printing, but scanner is not recognized from computer, computer not recognized from printer.  Have not found any solution in web search.  Thanks

    I suggest for you to wait for the Windows 8 full version to be released. The scanner function will be available then for sure.
    Works every time.

  • Special Functions keys not working on Satellite C50 - Windows 8.1

    Hello,
    Please could someone help me out.
    I have a Toshiba Satellite C50-A0393 that I got a few months ago with Windows 8.1 already installed (64 bit). Today I got a message saying I needed to look at the PC Health, a Toshiba blue message concerning the access agreement, and I noticed that there were three upgrades that needed to be done, the only one I can remember being the Toshiba Video Player. I think that another one had to do with the charger light?
    I don't know.
    But once I restarted my laptop after the updates I noticed that the special function keys were not working (i.e. the volume, mute, pause and play, etc.). i then went onto the Toshiba Desktop Assist and into system settings and selected the keyboard tab. I then made sure the setting for special function mode was selected.
    Now, when that setting is in place, certain keys work but for F3, F5, F6, etc and when I want to use the special functions only the volume up and down work when pressing 'Fn', but special function mode is still selected? Only those two work, not the mute or flightmode or bluetooth, which was working normally before the upgrades.
    I have googled but cannot find anything specific to 8.1, or not relating to upgrading to 8.1. I cannot find the flashcard utility and do not want to try something where I do not know what I am doing. How can I get these special function keys working again normally? Sorry for the long message but I wanted to give as much info as possible.
    Many thanks,
    Melanie

    Hi
    It sounds strange to me that a Toshiba update (Toshiba Video Player, etc) would affect the function key functionality.
    Nevertheless the function key (F1-F10) can be used in combination with or without the FN button. This depends on the special function key mode.
    In case you want to use the F1-F12 functions without the pressing FN button, the function key mode should be enabled (should be set to special function mode)
    Here the full details how it works:
    https://aps2.toshiba-tro.de/kb0/HTD2503B90001R01.htm
    Now it these buttons would not work even if the FN button has been pressed, then there is some problem with the software.
    First of all I would recommend you to set the BIOS to default because this function key mode can be changed in BIOS too.
    After that, check if the key would work. If not, reinstall the
    Toshiba Function Key Utility
    And Toshiba System Driver
    You can also check if the essential service has not been disabled.
    Start the Task Manager and go to start up items. There you should enable all Toshiba apps and services and then restart.

Maybe you are looking for