Is there a system status page anywhere?

Lately Verizon email has been FAR less than reliable.  I can't seem to find any system status page anywhere.  It would seem far smarter and more customer focused for VZ to post such issues rather than have tech support people swamped with angry people that they can't help - adding to the already ridiculously long wait times.  Not sure what's going on here but it's not looking good for VZ.  Unreliable email is what caused me to leave my former provider.

Way back when you could look at it - I would think that as a business - having an updated status page would eliminate thousands of support tickets. Like now - how we all came here to see why we havent been able to get our email all day.
When we click that support button at the top of the page - it should clearly list current problems. Hiding them just **bleep** people off...it doesnt make you look better.

Similar Messages

  • 4G system status page?

    Is there a system status page for 4G anywhere?  My Tbolt everyday or 2 drops to 3G or even 1x for a while, but today it's been stuck on 3G for several hours.  I'd like to see if Verizon's got a known issue before calling in.

    There was a request on the community page suggestions but it seems to be going nowhere. Guess no one with clout wants to champion it.

  • Is there a sync status page?

    Is there an "about:sync" status page displaying information such as
    - number of devices active on the account
    - when each device was last synced

    You can go to about:sync-tabs to see a list of other devices that have tab sync enabled.

  • Is there a system status web page for iCloud and email?

    It's days like this that I scratch my head wondering how to find Apple technical assistance.  Does it exist?
    At least we have a forum to see that everyone else is having problems too.

    My mail has been down all day. This is inexcusable. My wife's mail works fine. I have dozens of business contacts who've been emailing me today and the only status Apple is telling us is that they're working on it. I need my friggin' mail! Not funny anymore. I've had a .mac address for 8 years and am on the verge of cancelling it. Thanks, Apple. No really, thanks.
    I should add that this is happening on ALL devices. MBP, iPhone, iPad, and even the iCloud site. *****.
    And I can't even say it s u c k s without seeing stars.

  • ICloud System Status page URL

    FYI - I just learned about this page:
    http://www.apple.com/support/icloud/systemstatus/
    Not sure how fast it updates, but the next time my matching is hung I'll check it before I call support.   If you weren't aware of this page I just wanted to pass it on.
    Cheers.

    Good News: you're not alone with this problem -- lnfinite Loop between login and maintenance screen
    Bad News: Apple has no fix or work-around yet
    A dev support guy called me last week and said that they know of the issue but the only 'help' for now is just be patient. That was 4-5 days ago and I've had no feedback since then. Just be patient.

  • I have a HP PSC 2210 all-in-one. Can I print a status page that shows count of pages printed?

    I said everything in the subject except, if there is a status page printing capability how do I do it,

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • System status for capacity availability in Process order

    Hi,
    I have activated the capacity availability check in SPRO to have a capacity check while process order  creation.
    But system doesnt provide any status in the process order for this. No status is appearing even  if I do a manual capacity check in process order.
    Is there any system status for capacity is available?.
    Thanks in advance
    Prathib

    Hi Prathib
    System will be give any status if capcity is available, but it will give a status MSCP if there is Capacity shortage.
    Rgds
    UK

  • Lock the BT field though system status

    Hello,
    we need to lock all the field in our contract(ZTA) all the time, even if the contract changes user status(E0002  --> E0003, E0004...). Is there any system status to avoid to modify the fields at header and item level? And even at the first status, Opened?(this is because the contract always going to be copy of the quotation, so none modifications)
    Each user status contents a transactional control, INPR, CONC, FINI... with different actions I0005, I0008... (checking BS33) but i don´t find the proper one. if there is any document about, it would be perfect.
    Thank you in advance.
    Luis Angel Fernández

    Hi Luis,
    In the Badi implementation proceed as follows :
    1. Do whatever check you want to carry out for the status. You can use the CRM_ORDER_READ function module to get the status of the transaction. Pass is_fieldcheck_com-ref_guid in a table to CRM_ORDER_READ to do so.
    2. After that loop on the table ct_input_field_names and do the following.
      LOOP AT ct_input_field_names INTO wa_input_field_name.
        wa_input_field_name-changeable = 'A'.    "Display Only
        MODIFY ct_input_field_names FROM wa_input_field_name INDEX sy-tabix
        TRANSPORTING changeable.
      ENDLOOP.
    <b>Reward points if it helps.</b>

  • "certificates, identifiers and profiles" is down, but system status says OK

    Anybody else? Started about 10:30 am, PST.
    https://developer.apple.com/support/system-status/
    I was resetting devices for a client, and when I submitted my changes, I got a gray screen that
    promised that "we'll be back soon." Some other stuff from the system status page is down, too:
    member center, software downloads.

    10:56, system status is updated to reflect the current state of affairs.
    I bet it has been a busy 30 minutes *somewhere*.

  • HT1515 Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

    Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?

    They all are, except that models made in October 2009 and later can't be set up or configured from 10.4.11.
    (65132)

  • Is there any function module to Change the System Status

    Dear ABAPers,
             I am working in the Customer Service Module.I want to change the System status.
    Is there any function module to change the System Status.
    Thanks & Regards,
    Ashok.

    Hi Ashok
    Service Order status update function module ?
    How to set the system status
    Check above threads,
    Regards,
    Syf

  • Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

    Dear All,
    When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
    The fields are:
    1. WBS Element Description, technical name: PRPS-POST1
    2. Person responsible number, technical name: PRPS-VERNR
    Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
    The client do not want to set LOCK system status for master data option.
    Is there any enhancement or standard way of doing that?
    Regards
    Saqib Usman

    Dear Saqib,
    Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
    Also go thru the below link for clarification of WBSE system status:
    http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
    For locking all master data, as above experts suggest, you should use MDLK/LKD.
    Regards
    Shishir

  • CRM70 Use of dynpro services is not possible in the current system status

    Hi all,
    i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
    I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    Use of dynpro services is not possible in the current system status
    Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
    Could one of you experts please give me a hind?
    Thank you
    Kind regards
    Manfred

    Solved,
    there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
    Kind regards
    Manfred

  • Printer Device Status Page Error on IPP site

    I have print services on Windows Server 2012 Datacenter. When I go to the IPP site and click on a printer that has a Device Status link under the View section, I receive an error,"Device Status Page Error...We are unable to generate the device
    status page for the selected printer. Please contact your system administrator for more information". This happens on all our printers that has a Device Status link. And the printers are different models and some are type 3 and type 4. I have tried accessing
    the ipp page on Server 2012 and Windows 7 and it still gives the same errors.

    You are correct about Microsoft not creating a hotfix for this issue in current versions of Windows. Microsoft support replied to me and indicated the following:
    Hi Tiffany,
    Thanks for your reply.
    After consulting with our product team, we will not fix this issue in the current product consider the many changes involved. but we might
    consider it to the next generation product.
    Thanks for your understanding and cooperation. Please feel free to let me know if there is anything else that we can help.
    Best Regards,

  • System Status at WBS level

    Hi friends.
             I have an issue in my report, my requirement is I have to fetch all the WBS Elements which are having System status as TECO . But in the selection screen i have given date range. Now i have to fetch all the WBS  having TECO as system status with in this date range . I have used JEST table also for checking this status .I have used  prps table for wbs elements.
    when i give the date range i am not getting all the wbs with in tht range.
    how can i validate date in this case.
    Is there any table which gives system status based on date .
    i want table with system status and date.
    please have a look over this .

    Hi,
       Try the fm STATUS_TEXT_EDIT.
    Regards
    Kiran Sure

Maybe you are looking for

  • How to see holidays in Ical

    How do I get the calendar to show holidays?? I am using Ical as the calendar not Iphoto.

  • 10.7.5 vs. 10.6.1

    Can I restore Ver. 10.6.1, replacing 10.7.5? If so, how do I do that? (Tried re-installing, but that wasn't allowed.)

  • Panorama photos too small

    Okay,so i have a cool panorama photo,but it's SO small,how would i make it bigger without messing up the quality(say i wanna put it in a long frame on my wall.)I know the video for the apple Itouch5 showed the kids in hallowen costumes and in a frame

  • Site level failover

    scenario: 2 datacenter with good connectivity. SQL 2012 principal and witness servers are placed in main site and mirroring server is place in DR site. high-safety mode with auto failover proposed. customer is asking what about the main site down? ca

  • Run VI without GPIB card

    Is there a way to run/debug a VI, with GPIB commands, on a computer without a GPIB card? We have a limited number of computers connected to instruments with GPIB. I want to debug the VI at my desk with no GPIB. Thanks in advance, Mark Getbehead Sent