Is there a tool that I can use to get web pages that fit to the monitor screen

Is there a tool that I can use to make webpages fit the size of my monitor screen instead of having to scroll side to side to read an email?

Hi notmarriedanymo,
You can try using [https://support.mozilla.org/en-US/kb/how-do-i-use-zoom Zoom]. This will increase/decrease the size of everything on the page. You can try hitting ''CTRL and +'' a few times to try it out. ''CTRL and 0'' will return it to normal size.
Hopefully this helps!

Similar Messages

Is there is signal booster I can use to get better reception for 3G on my ipad? My reception is between 1 (which doesn't work) and 3 bars and it never reverts to Edge. Thanks

Hi, I'm new to this new format for the forum so I may make lots of errors.
My 3G IPAD only gets between 1 and 3 bars when I use 3G at home which is a lot. When its at 1, I can't use my IPAD online at all. I have the original IPAD, 16G, with 3G. My operating system is 4.3.5.
I called Apple support and they connected me to ATT and they didn't know what the problem was. I told them it didn't revert to Edge and they said that's because it can't find the signal. They said I could get a new SIMS card if it didn't work in town but yesterday I took it to town and it got between 3 and 5 bars so I didn't pick up the SIMS card yet.
So I was wondering if anyone knew of a signal booster that will increase the 3G signal so at least it stays off of 1 where I can't use it. I use this mostly at home because my internet connection keeps dropping too so I rely on my 3G 50 percent of the time.
Or does anyone have any other ideas?
Thank you.
I used to be mpoinar but that account is no longer accepted here so I had to create a new one. sigh.
Martha

Hi, I just watched the video for the Microcell and you have to use your broadband connection to get it to work and the problem is my broadband connection is down the times I'm using my 3G. That's why I use it, because my broadband connection is not working so much of the time.
Any other suggestions? :-)
Martha

Can't load certain web pages. Is it the ActionTec Router?

Most websites load fine, but I've been having a problem accessing some websites, like www.write-bros.com and www.screenplay.com. For some reason, my MacBook Pro can't access those sites, using either Safari, FireFox, or the software that accesses the sites without a browser.
My PC's, and G4 can, however, using the same internet connection and router.
I recently tried an experiment, and I connected my ethernet cable from the wall directly into my MacBook Pro, and it worked! I could access those sites!
I have Verizon Fios, fiber optic connection, so there is no modem to work with. Instead, I have the ActionTec MI424WR router that Verizon provided. I need to use that router because it does other things for the service I have... TV, etc.
The ActionTec is configured fine, nothing blocked, etc. I even completely turned off the firewall and still it wouldn't work.
Another experiment, wireless, was to connect to a neighbor's wireless connection and the websites were viewable that way, too.
I heard that there might be an issue with ActionTec's wireless features, but I am using a Belkin Pre-N Wireless Router as a switch only for wireless and nothing else, and it's connected to the ActionTec (which has it's wireless functions turned off completely).
I have been experimenting with the ethernet connection and the wireless, and I'm out of luck using the MacBook Pro on my own ActionTec router.
Anyone have any ideas? It would be most appreicated to get this fixed.
Thanks.
MacBook Pro 17" Mac OS X (10.4.9)

Those two are essentially the same owners, same place.
www.screenplay.com...
Network IP address lookup:
whois query for 66.226.4.82...
Results returned from whois.arin.net:
Alchemy Communications, Inc. ALCHEMY-NET-3 (NET-66-226-0-0-1)
66.226.0.0 - 66.226.31.255
Write Brothers WRITEBROTHERS (NET-66-226-4-80-1)
66.226.4.80 - 66.226.4.95
# ARIN WHOIS database, last updated 2007-06-04 19:10
# Enter ? for additional hints on searching ARIN's WHOIS database.
Results returned from whois.arin.net:
CustName: Write Brothers
Address: 138 N. Brand Avenue Suite 201
City: Glendale
StateProv: CA
PostalCode: 91203
Country: US
RegDate: 2007-04-24
Updated: 2007-04-24
NetRange: 66.226.4.80 - 66.226.4.95
CIDR: 66.226.4.80/28
NetName: WRITEBROTHERS
NetHandle: NET-66-226-4-80-1
Parent: NET-66-226-0-0-1
www.write-bros.com...
Network IP address lookup:
whois query for 66.226.4.82...
Results returned from whois.arin.net:
Alchemy Communications, Inc. ALCHEMY-NET-3 (NET-66-226-0-0-1)
66.226.0.0 - 66.226.31.255
Write Brothers WRITEBROTHERS (NET-66-226-4-80-1)
66.226.4.80 - 66.226.4.95
# ARIN WHOIS database, last updated 2007-06-04 19:10
# Enter ? for additional hints on searching ARIN's WHOIS database.
Results returned from whois.arin.net:
CustName: Write Brothers
Address: 138 N. Brand Avenue Suite 201
City: Glendale
StateProv: CA
PostalCode: 91203
Country: US
RegDate: 2007-04-24
Updated: 2007-04-24
NetRange: 66.226.4.80 - 66.226.4.95
CIDR: 66.226.4.80/28
NetName: WRITEBROTHERS
NetHandle: NET-66-226-4-80-1
Parent: NET-66-226-0-0-1
NetType: Reassigned
Comment:
RegDate: 2007-04-24
Updated: 2007-04-24
I really think it's something with them, but have you tried tweaking the settings yet on the MBP? Like MTU & such?

Can not open any web page in Safari

can not open any web page in Safari on the IPad. All other wireless features work fine.

If this does not work then try a reset ,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Is there any tool that can display the internal structure of a F4F file?

Dear all,
I want to view the internal structure of an f4f file, Is there any tool that I can use to do that?
Thanks,
Xuedong

check the table AUFM (Goods movements for order)
pass inputs to all the key fields.
and another table AFPO
try to use these tables.
regards,
sateesh.

Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

Firefox can't read any Bookmark that was imported from my PC with file extension .url. Safari reads them fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox

Firefox can't read any Bookmark on my Mac that was imported from my PC with file extension .url. Safari reads them all fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox
== URL of affected sites ==
http://anysite.url
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hello JF.
I don't think that extension is supported. I believe Firefox can only read .json and .html.
You may want to read this though:
[http://support.mozilla.com/en-US/kb/Importing+bookmarks+and other data from Safari Importing bookmarks and other data from Safari]

I have a Macbook 2007/08 model and the charger has decided to pack in. I have also recently purchased a Macbook Pro 2013 model and would like to know if there is an adaptor available that I can use on my Macbook Pro charger to charge the Macbook

I have a Macbook 2007/08 model and the charger has decided to pack in. I have also recently purchased a Macbook Pro 2013 model and would like to know if there is an adaptor available that I can use on my Macbook Pro charger to charge the Macbook.

You can get a new third party 60W power adapter on eBay for under $20.
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313
Or for $80 from Apple http://store.apple.com/us/product/MC461LL/A

Is there a tool that reads the number of assigned RefNums (primarily Queues)?

Hi-
I have been troubleshooting a memory leak caused by queues, and have found the following link helpful:
http://forums.ni.com/ni/board/message?board.id=170&message.id=85418&requireLogin=False
My question is: Is there a tool that I can use that will show me how many refnums are opened in memory? Preferably with the references name? It would make verifying queue memory leaks and their eradication so much easier! If such a tool does not exist, could it be added to the VI profiler sometime in the future?
Thanks!
-Randy

BUMP. I am curious too. But I suspect not.
A couple of things:
Looking queues up by name creates a new reference to that queue (even if it exists). So if you have a VI that runs for a long time repeatably looking it up by name, it will bleed the memory dry.
Setting the "force destroy" of the release queue to true will destroy all references to that queue. Freeing up that memory.
As you are aware, I uses queues in my primary architecture. I have run them in 30 plus day trials with no problems. (I realize this is not helping you.) so by NI side implementation, there is no problem.
I am not sure how much of a bear it would be, but you could wrap the "create queue" and log the number of creates that you are running. You can wrap the release queue, and see which are getting released. Keep in mind if you "create" the same queue twice you will have two references open to that queue. Force destroy closes both, otherwise, you are left with the remaining. It is a management nightmare. The latest incarnation of my statecase manager implements queue tracking. The nice part of this, is that I can actually pass events to any queue running, and save myself the trouble of looking it up by name.
But you do have your work cut out for you, depending on the size of your program.
Good luck.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

I have an older Ipod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new Ipod Touch and cannot be updated. Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one?

I have an older iPod Touch, I bought a new one and the Itunes on my computer is too old to recognize my new iPod Touch and Itunes cannot be updated. Is there a creditable software program I can use to get all my old music from my old iPod Touch to the new one? It is my understanding that the music cannot be saved onto my new iTunes, b/c I did not have iCloud. I have over 2,000 songs I just cannot part with. PLEASE PLEASE PLEASE help some how!! THANKS!

I had the same problem with my iPad, i couldn't get the newer version of itunes because the computer was too old and my iPad couldnt sync with the old itunes. I got a PC from school a few months later so that solved the problem for me. Unfortunately i don't think there would be a program to put your music on your iPod, iTunes should be the only way to transfer files to Apple devices. What operating system are you running and what version of it is it?

It there any app where i can use my existing account balance to in-app purchase a gift card?

it there any app where i can use my existing account balance to in-app purchase a gift card?
there are itunes gift credit remaining in my account, but i an trying to transfer it to another account, so if there are app that allow me to in-app purchase giftcard, then i can indirectly transfer the credit into my another account.
is there anyone can help me with this question, or have a better idea
thx a lot!!

Skydiver119 Thank you, like I said new to the use of tablets but enjoing them vey much, thanks again will be adding some apps and iBooks to my iPad JoeNamath9

We want to automate Iphone mobile app's, can anybody give the details of the Mobile Automations tools that are certified the by the Apple, here i am having some of the tool names but i could not be able to figure out whether Apple has cerified those tools

Hi All,
We are planning to regress IOS mobile app that were developed in our organization with the help of Mobile Automation tools that were available int he market both commericial as well as non-commercial. Can anyone please provide us with list of tool that were certified by the apple to use for our needs in the functional as well as regression of the developed applications. I am having a list of tools that we got from the net when browsed,
UIAutomation
TestFlight
SeeTestMobile
M-eux
NativeDriver
Frank
FoneMonkey / Mokey Talk
DeviceAnyWhere
KIF
LessPainful
iCuke
UISpec
Zap-Fix
TestQuest
T-Plan Robot
Sikuli
TestPlant
Can any one of you let me know from the list as what are the tools that was certified the apple, apart from this list anyother tools that i may miss from the list that were certified by the Apple
Revert back ASAP
Wating for the reply

Hi All,
We are planning to regress IOS mobile app that were developed in our organization with the help of Mobile Automation tools that were available int he market both commericial as well as non-commercial. Can anyone please provide us with list of tool that were certified by the apple to use for our needs in the functional as well as regression of the developed applications. I am having a list of tools that we got from the net when browsed,
UIAutomation
TestFlight
SeeTestMobile
M-eux
NativeDriver
Frank
FoneMonkey / Mokey Talk
DeviceAnyWhere
KIF
LessPainful
iCuke
UISpec
Zap-Fix
TestQuest
T-Plan Robot
Sikuli
TestPlant
Can any one of you let me know from the list as what are the tools that was certified the apple, apart from this list anyother tools that i may miss from the list that were certified by the Apple
Revert back ASAP
Wating for the reply

Is there some way that emails on the iphone can be automatically be deleted on synching when those emails have been downloaded to my PC?

Is there some way that emails on the iphone can be automatically be deleted on synching when those emails have been downloaded to my PC?

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Why is there a guest account who can use safari in my login window???

why is there a guest account who can use safari in my login window when i completely disabled the guest account. I disabled the guest account so others wont be able to use the internet, specifically safari, on my mac, as a form of security/parental control and now anyone who wants to go online csn do so.
how could i completely remove that out of my login window?

Security enthusiasts highly recommend keeping the Guest User Safari account enabled so that if you happen to lose your Mac, or if it’s stolen, it could easily be tracked down.
The first thing most thieves do is turn on the device to see if it works, and/or access your information, or surf the internet. Once it connects to the internet, you now have an opportunity to start collecting data that could eventually lead to the device recovery and thief capture.
This is not a full guest user account, if you select the Guest User option at login, the Mac will restart to a secured Safari-only version of the OS with access to the internet. So what’s the point of this? It turns out this is part of setting up iCloud in Mac OS X, specifically the “Find My Mac” feature. The Safari Guest User allows someone to get online so the Mac can be located, but prevents the Safari user from accessing your files and applications.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Is there a tool that I can use to get web pages that fit to the monitor screen

Similar Messages

Maybe you are looking for