Is there a transaction in SolMan to verify OSS Connectivity Status?

Currently, the only way to know whether my SAP OSS connection is still open is by navigation to the Service Marketplace to verify the status of the connection. 
Is there a equivalent transaction in Solution Manager that could help validate this?  (In the old day, we use to this via tcode OSS1).  
Note that this is NOT a connectivity issue; but rather problem with regards to whether the connection is open.

Service Connection provides the required function:
[SAP Solution Manager Help - Service Connections|http://help.sap.com/saphelp_smehp1/helpdata/en/28/9015dd452e48fabfb86098cda89e5b/frameset.htm]
Transaction: SOLMAN_CONNECT

Similar Messages

  • Is there any transaction code for uploding logo in ALV reports.

    is there any transaction code for uploding logo in ALV reports.

    hi,
    call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
                i_logo             = 'Z_LOGO'.
    endform.
    Upload Logo for REUSE_ALV_COMMENTARY_WRITE
    For those who wish to upload and use a picture in your ALV abap reports.
    Steps for uploading Logo :-:
    1. Goto the transaction OAER
    2. Enter the class name as 'PICTURES'
    3. Enter the class type as 'OT'
    4. Enter the object key as the name of the logo you wish to give
    5. Execute
    6. Then in the new screen select Standard doc. types in bottom window
    Click on the Screen icon
    Now, it will ask for the file path where you have to upload the logo
    7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
    or
    Import Logo and Background Picture for Reporting
    In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
    From the SPRO:
    HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
    Activities
    1. Enter the Name of your logo/background picture as an object key in the initial screen.
    2. Make sure that the class name is PICTURES, and the class type is OT.
    3. Choose Execute.
    4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
    5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
    6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
    Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
    If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
    Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

  • HT2534 When setting up my apple I'd I get a verification email but there does not seen to be a link to click on there is a link that says "verify now" but it's not a link the only other thing on the page is a link to apple thats starts the process all ove

    When setting up my apple I'd I get a verification email but there does not seen to be a link to click on there is a link that says "verify now" but it's not a link the only other thing on the page is a link to apple thats starts the process all over again.does anyone have a solution for this problem?

    The idea to jumpstart by change was not the smartest one, but gives you an opportunity to use that "temporary" account as permanent. You do not have a choice cause obviously despite you thinking that old account is no more -it does exist on Apple servers. And if you are unwilling to share your [email protected] with friend, just create one extra [email protected] for your friend. One suggestion - do not use gmail.

  • Is there any transaction to view the customer master data ...

    is there any transaction to view the customer master data ...i me all the datats so that ui can prepare a report......

    Hi Sunaina Kumar,
    From Funtioanl Point of view
    XD02 or Xd03 - Chane / Display Customer Centrally ( With Company Code Data)
    VD02 or VD03 - Change / Display Customer - Sale and Distribution( With out Company Code Data.
    From Technical Point of View:
    SE11 or SE16
    Table Name : KNA1 or KNB!
    From here you can view all the customer data.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • I either do not receive a verification email while trying to set up (despite requesting it) or, on the one occasion I did, there is nowhere/no link to  verify

    I either do not receive a verification email while trying to set up (despite requesting it) or, on the one occasion I did, there is nowhere/no link to  verify-what do I do about this?

    log in to appleid.apple.com make sure your email is verified.if not, send yourself a link. if you are using AOL, sometimes you wont get it.
    check your spam folders also.

  • Is there any transaction code for Report Designer,Query Designer and WAD

    HI Gurus,
    please tell me s there any transaction code for
    1 Report Designer
    2 Query Designer
    3 WAD
    Thanks in advance
    Prashant

    Hi Prashant,
    We don't have any Transaction Codes for these.
    Since these are installed along with the SAPLOGON BI components, it cannot be called using a standard transaction.
    You have to use only .
    Goto Start -> Programs -> Business Explorer -> Web Application Designer/Report Designer/Query Designer.
    Hope it helps.
    Reward with points if helpful.
    Regards
    Hemant Khemani
    Edited by: Hemant Khemani on May 16, 2008 5:39 PM

  • De-duplication in MDM but there are transactions in client systems

    Hi every one,
    I have a question about removal of any duplicate record in the MDM consolidated from any system. Let suppose if there are several transactions are purformed using that duplicate master record. What if that master record has been deleted in de-duplication in the MDM. How do you change that master data used in transactions to a orignal and master copy.
    For example there are parent-child relationship. Master data can not be deleted if there are transaction available.
    If you know to deal with this scenario then please share with me as well.
    Regards,
    Naeem Khan
    Bonn

    Hi Naeem,
    Firstly, MDM does not delete any duplicate records identified by the SAP-MDM system being fully aware that there may be open transactions on these master records which will have a direct impact if deleted.
    When MDM identifies Duplicate master records across systems it merges them in MDM.Merging does not delete the original records in MDM but saves them as one merged record in the Key mapping.
    The original records local key is still maintained on which existing transaction can continue to run.
    The point here is these identified duplicates  by MDM system can be informed to the transaction system team and futher transactions can be stopped on those duplicate master
    Also we can then gradually move to the CMDM phase where once the duplicate masters are identified the new masters creation can be done centrally through MDM.
    These are the Major actions that can be taken after duplicate finding using SAP-MDM.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Is there a transaction to delete an article (Material Number) from SAP?

    Hello SAPients!
    Does anybody know: Is there a transaction (or FM) to delete an article (material number from SAP ?
    Thanks!

    You can only flag the material for deletion.  You do this via MM02, or you can do it via BAPI_MATERIAL_SAVEDATA.  THe material can only be fully deleted when the archive process has been ran for the object.
    Regards,
    Rich Heilman

  • How to Check source systems in RSA1 and verify that connections are working

    How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

    Hi,
    In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
    Regards
    Vinod

  • Cannot refresh table - test connection works fine but refresh gives "We couldn't refresh the connection. Please go to existing connections and verify they connect to the file or server." error.

    I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
    Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
    "We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
    In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
    location that are refreshing without issue. Can anyone think of what may be causing it?
    I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue. 
    Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
    Thanks

    Hi Maracles,
    Thanks for your post.
    From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
    You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
    For more information, please see:
    PowerPivot Options & Diagnostics Dialog Box:
    http://technet.microsoft.com/en-us/library/gg399091.aspx
    Using a Trace File to Troubleshoot Errors in PowerPivot:
    http://www.sqlchick.com/entries/tag/powerpivot
    Best Regards,  
    Elvis Long
    TechNet Community Support

  • U2413 Color Calibration "Verify USB Connection"

    I am trying to use the Dell Ultrasharp Color Calibration Solution with an x-rite i1 Display Pro.
    Can't get beyond "Verify USB Connection". The USB cable between the monitor and computer is connected (tried both a USB 3.0 and a 2.0 port). The USB hub on the monitor is working. E.g. a USB stick connected to it can be read. The hub also appears in Device Manager.
    But the Color Calibration software insists that there is no connection.
    I made sure that nothing was connected to the hub. Installed the driver as suggested by Chris in "http://en.community.dell.com/support-forums/peripherals/f/3529/t/19618874". So far nothing works.

    The monitor is connected via HDMI to a Radeon HD 7900 card. I am not sure what you mean by "upstream" and "downstream", but there is a single USB cable connected to the back of the monitor to a USB 3.0 port on the computer. (I tried a USB 2.0 port as well.) The USB hub is working (tested with a USB stick). When I tried to use the calibration software nothing was connected to the hub (apart from when I tested with the x-rite i1Display connected to the hub).
    Other USB ports on the computer are connected to: keyboard, mouse, HardLock dongle (also tested without the dongle).
    The monitor was reset to Factory Defaults.
    Only one monitor is connected.
    DP 1.2 is disabled.
    I tried the x-rite device connected directly to the computer and on both of the USB ports on the side of the monitor. X-rite's own Profiler software always recognizes the device, no matter to which port it is connected.

  • Verifying Server Connection in Configuration Manager

    I am trying to deploy ES3 on Weblogic 10.3.6 and am having a problem with Configuration Manager. When I Verify Server Connection, the CM spins for a bit then comes back with a ALC-LCM-100-011 error, Cannot Connect to Application Server.
    In the CM log there is this:
    com.adobe.livecycle.cdv.CDVInternalException[ALC-LCM-100-011]: Cannot connect to application server.
    Application server host or port may be invalid.
    Caused by: java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.mbeanservers'
    I know the info is correct, in fact when I intentionally use a wrong password or account the CM immediately returns that the info is wrong.
    My WL architecture has a WL domain with distributed development and staging managed servers (no clusters). The Admin server is standalone, as are the two managed servers. I am attempting to install on one of the managed servers.
    Any hints here? Thanks!

    See the link http://help.adobe.com/en_US/livecycle/10.0/PrepareInstallSingle/WS624e3cba99b79e1229e967b2 12eea97f932-7ffe.html . It has the below text :-
    Two primary startup scenarios are available for WebLogic:
    Using Node Manager and configuring through the Administration Server (recommended)
    Directly starting the Managed Servers with configurations in the StartManagedWebLogic scripts
    To use the automatic configuration features of Configuration Manager (the recommended option), you must use the Node Manager and configure through the Administration Server.
    If you are directly starting the Managed Servers, you can still use the automatic configuration features of Configuration Manager. However, you must manually enter the Configuration Manager changes into the StartManagedWebLogic scripts. For the appropriate steps, see Installing and Deploying LiveCycle for WebLogic .
    I think, if you want to use configuration manager for authomatically configuring the managed servers, you have to supply the admin server port while verifying the connection for weblogic server.

  • "Contribute cannot verify your connection information"

    Please can somebody help a non-techie from England (New Forest) who has hit a brick wall when using Contribute 3?
    I have a community (voluntary and not-for-profit) website as a sub-domain on my business website.  Don't ask me how I managed it, but I created the community website entirely on the Contribute software.  For unknown reasons, it would not allow me to edit and upload pages etc., even though I have been doing this for some time.  I uninstalled the program, re-installed it and starting again tried to make a connection.
    I got the error message "contribute cannot verify your connection information.  The path given does not match the provided website's homepage; or there may be a permission problem.  Please contact your administrator for assistance".
    Well, obviously I can't administer the site yet because I cannot get a connection!  I have asked my web-hosting company to verify the information I need and he tells me that he is able to get into the site with no problem using the same information - he is using contribute CS4.
    This is killing me with frustration because I so need to get some vital information out to our 34k residents which is time-critical (by 3rd Dec latest).  I have put so much work into this without moaning, but am now at the end of my patience and feel like throwing the towel in.  The site is onevoice.officeoverload.com if you would like to see what I mean.
    Thanks for reading this - apologies that it is long.  If anyone out there can help I would be so very grateful to hear from you
    Best wishes
    Sue

    Sue,
    Maybe I can help you as I just solved my own connection problem after trying to get help from Adobe online support, phone support, and this forum for over a month.
    You will need to have access to your Contribute Server installation.  If you are using a MS Windows based pc and it was installed using the defaults it should be located here: C:\Program Files\Macromedia\Contribute Publishing Server.  Under the CPS folder there will be a number of folders but you only need to open the database folder.     Inside that folder will be a folder(s) with it's name being a number [1,2,3 - depending on the number of sites that you connect to]
    Inside each of the site folders there will be a groups folder and user folder and a file named connection_key.stc.
    I moved all of my site folders to another folder I created off the root folder [C:/contribute database backup].
    That has the same effect as deleting the folders, but gives you the option to restore them if you need too.
    Then I open the Contribute Client and it allowed me access and I deleted the existing folders and drafts.
    Then I went to the site that I wanted to connect to and recreated the connection using the prompts.  I had to recreate all of the users and assign their roles for the each site.
    I did have a problem recreating one of my sites because it gave me the message that there were "drafts that needed to be deleted or exported", but it wouldn't let me do either of those things.  I did a seach of my computer for the word "draft" and it found two files buried in some hidden file.  I deleted those files and then I was able to recreate that web site connection.
    I think the connection_key.stc file is the important file that needs to be removed as it contains an encrypted string of data.
    In fact I also copied the connection_key.stc from one site folder to another and then I was able to get into the site, delete its connection (it was connecting to the wrong site of course) and then recreate the connection.
    I hope this helps.
    Jim

  • Contribute cannot verify your connection information... Please notify your administrator."

    After a initial network error last night, The Shared Settings
    file was zapped. Contribute decided I was no longer the Admin, and
    the Editor's connection also disappered.
    I found the note that's pasted here, in the Contribute
    Forums.
    "connect to your server (using 3rd party ftp client) and
    delete the _mm folder located on the root of the website - recreate
    your connections and that should solve the issue"
    I deleted the _mm folder. When I tried creating the
    connection anew, contribute said, "Contribute cannot verify your
    connection information... home/justandpeacefu/html/. Please notify
    your administrator." Now it's the same error every time. I am
    unable to make the new _mm folder.
    Contribute Tech support sent me an email which didn't help.
    It's at the very bottom.
    Items 1-4 in the email are not the problem.
    I am able to connect to the server, after the tech support
    person reset something there.
    I can make folders, and pages in FTP application;
    there are no special characters;
    permissions are fine;
    Item 5 did not have any effect. I turned off Apple's personal
    firewall, quit contribute, and tried again. Unsuccessful. Same
    error.
    ANY SUGGESTIONS, ANYONE?
    Text from Tech Support:
    As we have discussed on the phone earlier today, here are
    common causes of getting a "cannot verify connection information"
    when creating a connection in Contribute:
    1. Not enough permissions on the root of the website - Make
    sure you have enough permissions on the root of the website. Using
    third party FTP software, verify that you are able to create
    folders, upload and rename files, and delete files on the root of
    the website.
    2. There are special characters on the folder name of the
    folder you are trying to connect to - Avoid special characters as
    Contribute is not so compatible with them.
    3. Incompatible FTP connection settings: When you are asked
    to enter your FTP account information in the connection wizard,
    click the advanced button. Make sure that the only options selected
    are: "Choose FTP Server Settings Manually" and "Use Passive FTP to
    connect to the server".
    4. Verify that the FTP server is pointing to your web server.
    Example: upload any temporary HTML file on the root of your
    website; when you visit the URL:
    http://[your_server
    you should see the page render; You should not get a "Page cannot
    be found".
    5. Turn off any software firewall / antivirus running on the
    background to isolate possibly conflicting processes.

    I'm having the same problem as andres in the original post,
    the message comes up when trying to Continue out of the "Remote
    Path Info" box. I am able to browse to the location so Contribute
    does know its there. This is with Contribute 4 on Mac OS X
    connecting to a Linux server.
    I manually ran the FTP connection tests via command line:
    http://store1.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19496
    and all tests passed successfully
    I also downloaded and ran FTP Connection Checker (on my
    Windows machine) at:
    http://store1.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19012
    and passed all tests successfully.
    The wording with these tests imply that they are the same
    tests run by Contribute, i doubt that to be the case since these
    pass but Contribute fails.
    I have tried this with the site root and _mm folder set to
    permissions of 777 with no luck. I am able to connect and edit
    successfully with Dreamweaver and FTP with Transmit (Mac OS X).
    I'm about out of things to try and my deadline to train the
    client is coming up. Any further insight on this would sure be
    appreciated!

  • TS1717 I have downloaded a program but unable to view, message -50, I'm asked to verify my connection

    I have downloaded a program but unable to view, message -50, I'm asked to verify my connection. The program started and then there was just audio, and then stopped completely

    I have contacted the library staff and they said that I could go back and download again, this time into ITunes.  However when I try, it says that since I've already downloaded it once, it will go into the same file this time (again onto my hard drive).  

Maybe you are looking for