Is there a tutorial on how to run the new IMovie version 10?

Can someone direct me to video tutorials on how to operate the new IMovie inside Maverick. As has been the case recently with Apple, this update isn't necessarily user driven. Help please.

There's some info in iMove->Help:

Similar Messages

HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

Use it the same way as previously.
ctrl B shows the menus.
ctrl S shows the sidebar.
What else do you need help with?

How to Run the NEW "System Info Command" in Tiger ?????

I am new to Applescript and was wondering if someone could help me on how to run the new "System Info Command"?
Thanks!!!

The "system info" command that red_menace uses above is the new system info command that's mentioned on the web page you referenced. However, red's example only displays the "long user name" and the "AppleScript version" in the dialog.
The entire system info record actually contains all of these items, each of which you can access just like red_menace shows you in his example:
AppleScript version
AppleScript Studio version
system version
short user name
long user name
user ID
user locale
home directory
boot volume
computer name
host name
IPv4 address
primary Ethernet address
CPU type
CPU speed
physical memory
Steve
PS - if you switch Script Editor over so the bottom pane displays the "Event Log" you'll see the entire system info record displayed in the log when you run red_menace's script.

I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

I have an 2008 model MacBook running OSX 10.6.8 with an iphoto version 7.1.5. The services using this iphoto version are no longer offered. Will my MacBook run the newer iPhoto versions?

You can run iPhoto 9.2.3 with the system you currently have. It's available thru iLife 11 as Niel has already mentioned.
OT

Does anyone know of a good online video instruction on how to put together a photo slideshow in the new iMovie version. I found uTube videos using imported videos, but I want to use photos in iPhoto.

Does anyone know of a good online video instruction on how to put together a photo slideshow in the new iMovie 11 version. I found uTube videos using imported videos, but I want to use photos in iPhoto. I'm very familiar with how to do this in the pervious version, but it's no so intuitive in the new version.

Has anyone tried this one.. I am not sure if I am allowed to post information about other products... so if I am not please delete this part of my message.
New Trent Arcadia Pack IMP70D 7000mAh?

How to find the new download versions?

I hope this is the right place to post this question since I have no need for learning Java programming - also I do not create applications. The thing is that I'm trying to update my XP Home SP2 (IE7). The screenshot below is the Java that came with my PC when I got it - the last one on the list is an update I made yesterday here at this site. A mistake, I think? Should I un-install it? I would be very happy if someone could guide me to the right download links. Thank you so much in advance...
http://i31.tinypic.com/2eefwcn.jpg

Thank you javaci. That was helpful - I did not know this link. The test said I have the right software. I guess that means, that I can't benefit from an update. I find that a bit surprising - after all these years. I never updated any of the Java installed in my PC.
Now I only need help with the other question: should I un-install the Java download I made yesterday and if so: how? It is the last one on the list in the screenshot above - this one:
[Screenshot of all Java installed|http://i31.tinypic.com/2eefwcn.jpg]

How do I migrate my old iMovie video files into the new iMovie software version?

When my computer recently updated to the most recent software version, specifically the new iMovie software, all of my past iMovie files filmed and saved under the previous software became 'unplayable' in the new iMovie version. How do I import and update the old files to make them playable and part of my iMovie library?

You have to upgrade your iMovie 9 projects from iMovie 10 before you can use them. See:
http://help.apple.com/imovie/mac/10.0/#mov902ad0c31
Geoff.

Is there a tutorial on how to achieve Black/White photos with color details?

I am newbie with learning photoshop, Is there a tutorial on how to achieve Black/White photos with color details? similiar to this photo?
thanks

Type exactly that "black white photos with colour details with Photoshop" when searching online and you will find many examples on how to achieve this effect.
Examples:
Photoshop combining color with black and white - A non-destructive method - YouTube
How to Create Color Splash Effect | Adobe Photoshop cs5 - YouTube

[svn:bz-trunk] 18814: Add manual test for BLZ-594 with instructions on how to run the test.

Revision: 18814
Revision: 18814
Author:   [email protected]
Date:     2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txt

You do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted.

How to run the query in screen painter

i am using the patch 36 in business one so pls give information about
how to run the query in screen painter
regard
sandip adhav

Hope u have reached Screen painter interface,
1. Click 'Add Grid' from tool bar.
2. Go to 'Collections' tab in 'Properties' window.
3. Choose 'Data Tables' from the Drop down list.
4. Click 'New' found at the bottom of the Properties Window(same window)
5. U'll find the place to insert ur query.
6. U can rename the table name from 'DT_0'
7. Choose type as 'Query'
8. Clear content from box 'Query'
9. Enter ur query there. Dont forget to Click 'SET'
10. Go to Preview option from tool bar.
now ur query will be displayed as table format.
Note: First try with simple query b4 going for linking option.
Regards,
Dhana.

How to run the Macro in RTF

Hi Tim,
Do you know how to run the WORD macro in RTF?
Suppose I want to run the macro for Section Break, Is there any way we can call it using WORD Macro.
Any help is appriciated.
Thanks,
Ambadas

Hi Ambadas
Now, Im not entirely sure what you mena by:
'Do you know how to run the WORD macro in RTF?'
Are you looking to run a macro to create a section break for you during the design of the template? - you can do this.
Or do you want to embed a macro in the RTF output - you can not do this - RTF does not support macros.
Please explain further.
Regards, Tim

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

How to run the batch files

Hi Experts,
I am trying to implement automatic cache purging every day at specified time and i created txt file with SApurge All cache() and created bat file with nqcmd -q Analyticsweb -u username -p password -s (txt file location).
Now i want to run this bat file daily at specified time with out executing manually may i know how to run the batch file at specified time .
Thanks,

There is task type as command in workflow manager if you want you can go for that during the load
nqcmd -d "AnalyticsWeb" -u Administrator -p Administrator -s "D:\PowerCenter8.1.1\server\infa_shared\SrcFiles\1_BIPurgeCache.txt"
Check these urls
http://docs.oracle.com/cd/E12103_01/books/AnySched/AnySched_Scripts3.html
http://deliverbi.blogspot.com/2011/12/purge-all-cache-from-dashboard.html

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

How to run the VC application which is deployed

Hi All,
I am new to the VC. I created one model, and i have added some data service and view. and i compiled and deployed. I am not able to find , how to run that deployed application.
Can any body tell me how to run the deployed VC application.
Regards
Vijay

Hi Vijay,
go after you have deployed to Deploy on the right side of the VC. There you have to see "see source code" and "Run name of your application". Put your mouse at run and the application will start.
Another way ist to put the Button "Deploy Model " (it is the picture with the running man) in the 2second menu line. If you do this, the modell will start automatically, if it has no errors.
Regards
Thomas

Is there a tutorial on how to run the new IMovie version 10?

Similar Messages

Maybe you are looking for