Is there a tutorial on using doPOSTs or doGETs with JSC ?

I am trying to retrieve parameter from the URL (e.g www.myhost.com/checkprice.jsp?stockcode=123) for further processing.
In the checkprice.jsp, I already have a dropdown that allows user to select the stockcode, i am trying to pass the stockcode parameter from the URL to the dropdown for further processing.
TIA !!

Actually, I also do not understand how i can missed it, in fact, I think i refer to it twice (*gasp*) perhaps i was tired and not paying enuff attention.
JSC is a great tool for beginners like me, i have tried many and I liked JSC best. I am working on a small project and hope to deploy it soon on a commercial hosting outfit. praying hard that i can overcome any problems that come....
cheers

Similar Messages

  • Is there any tutorial for using ARM cortex-A processors of Zynq for digital signal processing ?

    Hello, everyone.
    Is there any tutorial for using ARM cortex-A processors(such as A9 and A53) of Zynq to deal with digital signal processing  problems?
    Please tell me , thanks.

    Hi
    Check below links
    http://www.xilinx.com/training/zynq/software-acceleration-for-dsp-functions-with-zynq.htm
    https://www.youtube.com/watch?v=ErEG7ZREcJQ
    http://www.xilinx.com/support/documentation/application_notes/xapp1170-zynq-hls.pdf
    http://www.xilinx.com/support/documentation/application_notes/xapp890-zynq-sobel-vivado-hls.pdf
    http://www.xilinx.com/support/documentation/application_notes/xapp1167.pdf

  • Just upgraded to Mavericks and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Is there a way to use my HP6100 Printer with Mavericks?

    Just upgraded my 2009 iMac (3.06 Ghz, core 2 duo $GB 1067 Mhz DDR3) to Mavericks OSX 10.9.5 and my HP6100 printer no longer works, when I try to reload the software it says PowerPC apps no longer supported.  Printer says the software was improperly installed. Is there a way to use my HP6100 Printer with Mavericks or do I need to go back to Mountain Lion or Snow Leopard? 

    It's not clear whether your printer is included in the Apple list - there is an Officejet 6100 and a couple of other types. Go to the page linked to above and use the browser search for 6100.
    I'm afraid HP are notorious for not supporting older printers - I had the same problem. Probably they hope you will buy another printer (I did, but it was a Canon). I did look on HP's site and couldn't see a driver - you could give it a try (make sure you have the exactly correct printer name):
    http://www8.hp.com/uk/en/support-search.html?tab=1#/qryterm=HP6100&search_search type=s-002
    Alternatively ou could try Gutenprint (open source software):
    http://gimp-print.sourceforge.net/MacOSX.php
    I found it would indeed drive the printer, but the colour dithering wasn't very satisfactory and the duplex printing bolt-on wouldn't work. However as Gutenprint is free it's worth trying to see if it's any good for you.

  • HT3131 Is there a way to use 2 external monitors with the MacBook Pro in closed clamshell mode?

    My internal display on my MBP is having issues and occasionally displays white lines all over the screen. The current external monitor displays properly. Is there a way to use two extrernal monitors intead of one external + the internal display?
    ==========
    Model Name:          MacBook Pro (17-inch, Early 2009)
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.93 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          6 MB
      Memory:          8 GB
      Bus Speed:          1.07 GHz
    NVIDIA GeForce 9400M:
      Chipset Model:          NVIDIA GeForce 9400M
      Type:          GPU
      Bus:          PCI
      VRAM (Total):          256 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0863
      Revision ID:          0x00b1
      ROM Revision:          3436
      gMux Version:          1.7.10
    NVIDIA GeForce 9600M GT:
      Chipset Model:          NVIDIA GeForce 9600M GT
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0647
      Revision ID:          0x00a1
      ROM Revision:          3436
      gMux Version:          1.7.10
      Displays:
    Color LCD:
      Display Type:          LCD
      Resolution:          1920 x 1200
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    Cinema HD:
      Display Type:          LCD
      Resolution:          1920 x 1200
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          *************
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported

    Hi Mike, this isn't the first such problem report I've seen, perhaps another option...
    http://eshop.macsales.com/item/Newer%20Technology/VIDU2DVIA/

  • Is there the way to use "Highlight File Format" with Acrobat Reader 9.0 or later?

    hi
    Do anyone know the way to use "Highlight File Format" with Acrobat Reader 9.0 later or substitutional way to highlight a PDF file as well as highlight file?
    I want to highlight some words by indicating character's location(from n to m) using Acrobat Reader 6, 7, 8, and 9.
    I use highlight xml file to highlight words in Acrobat 6, 7, and 8.
    http://www.adobe.com/devnet/pdf/pdfs/HighlightFileFormat.pdf
    According to this documents, "External Window Handler Plugin" is required to use highlight file.
    But I cannot find this plugin in Acrobat Reader 9.
    So Acrobat Reader doesn't recognize highlight file.
    Well, I know that there is another way to highlight pdf file. It is called "PDF Open Parameters".
    However this parameters cannot indicate location of characters but words which is to be searched.
    This parameter does not work perfectly to substitute a highlight xml file.
    To satisfy what i want to do, the best solution is that Acrobat Reader 9.0 recognizes highlight xml file.
    But I think it is impossible because of lack of plugin.
    Do anyone know the way to recognize a highlight xml file to 9.0 or another way to highlight some words?
    thanks,
    Asatamax

    The feature is disabled by default in reader 9
    (1) Open Adobe Reader
    (2) Click Edit > Preferences > Search, and
    (3) check the box labelled Enable search highlights from external highlight server.
    (response found here: http://support.dtsearch.com/dts0117.htm)
    I can't imagine why Adobe choose to disable it. It's a bad joke for us at UNESCO (http://unesdoc.unesco.org)

  • With the original ATV is there a way to use the usb port with external hard drive?

    Is there a way to use the usb with ATV1 and external hard drive?

    I have the same question and refuse to beleive that Apple would put the USB port there for a HD and not be able to use it for that purpose.

  • Is there a way to use the Maintenance Wizard with a .profile file...

    Good afternoon all...
    In my environment we have the same applmgr account for multiple databases. The .profile delivers a menu that allows the user to pick which database they wish to work with, and then a script runs which changes the environment specific variables for the desired database.
    In many environments I have worked in the .profile is used to setup environmental variables for the applmgr account.
    In looking at the instructions for setting up Maintenance Wizard it says to ensure ssh or rsh access to each of the applications servers using the applmgr account, and removing any .profile or .login scripts. This is not viable in my environment.
    In asking on metalink I was told 1) just ignore the ssh setup stuff; and 2)the ssh setup is essential for maintenance wizard to work. Clearly conflicting advice.
    How can I install/implement maintenance wizard without the loss of my current .profile configuration?
    Please advise,
    Adam

    Oracle support's assessment was that that there is no way around the requirement to use ssh/remsh, I did a bit of further research into the issue. I developed a resolution for hpux as follows...
    I used ssh rather than remsh for my shell and created a conditional statement in my .profile to handle the issue...
    # Set environment script if not secure shell -- 100311 MAC
    if [ -n "$SSH_CLIENT" ]
    then
    #Set up the shell environment
    set -u
    trap "echo 'logout'" 0
    umask 012
    else
    #Set up the shell environment
    set -u
    trap "echo 'logout'" 0
    umask 012
    # Set up Oracle environment
    . /usr/local/bin/envch
    fi
    The conditional uses -n for not null, or in other words it is True if the variable is defined but false if it is not.
    The variable $SSH_CLIENT is defined when logging in through ssh, but undefined when using another terminal method.
    If it is an ssh shell I still setup other environment variables, but I have to move the "set -u" line to a result of the conditional as placing it before the conditional will make the -n test condition invalid. (It will cause references to an undefined variable to return an error rather than null). If it is not an ssh shell I again setup the variables but also call the interactive component of the login as it's own script.
    I have tested this successfully and will now move on with the rest of the maintenance wizard installation.
    Thank you,
    Adam

  • Is there a way to use multiple canvas tags with the ToolKit for CreateJS for Flash in one HTML5 doc?

    Hey everyone, I was wondering if someone could help point me in the right direction for solving this. I have created 5 short animations using Flash and when I published each ".fla " (with Toolkit for CreateJS extension) I get 5 different html5 files with their own respective javascripts. Is there a way to get all those canvas tags in one html5 file and still have it work. I'd love a hint on where to begin so I can begin researching the solution.
    Thanks!
    -DJ

    Why do you think that one will be over written?
    You can sync as many ipods/iphones/ipads as you like to one computer.  Each is different and will only sync what you select.

  • Is there ANY way to use another email address with iCloud?

    Apple let you use any email address as an Apple ID, but I really want to be able to use a non-Apple email address with my iCloud mail. Just about every email service (Gmail, Hotmail, etc) allows you to send from a third-party address (once you've done a security verification) so that you don't have to change your email address when switching services. iCloud seems to have no such option. Is there any way round this, or any way to put pressure on Apple to add this basic feature???

    rdepom wrote:
    Is there any way round this
    I'm afraid not
    or any way to put pressure on Apple to add this basic feature???
    http://www.apple.com/feedback/icloud.html - but I don't think it's very likely they'll change it.

  • Is there a way to use the iCloud framework with keeping my data local?

    Even before the coming to light of the NSA scandal and Apple's involvement in it, I wasn't really comfortable with uploading my data into the iCloud. After all, there's an american saying that "possession is 80% of ownership". Frankly, I don't want to give Apple de facto ownership of my data.
    What I was hence hoping for was to buy a mac mini server edition and maybe change some preferences in order to switch my data storage and syncing location from North Carolina to my cupboard, maybe additionally providing that service to my entire family.
    Some Aplle "genius" told me that wasn't possible, the iCloud-Servers being "hardwired" into the software.
    Is that the case, or is there some way around this, maybe? I already am using Dropbox to sync photos with my devices and some family, but I really would like to have the option to change the server adress of my iCloud installation, as it would make stuff really a lot simpler and more integrated.
    Thanks for any reply and advice.

    In this case - Dear Apple MacOS X engineers. Pretty pleeeeeeeease incorporate such a feature in the next version of OSX (Server). That probably wouldn't go well with your buddies at Fort Meade, but might open a big chunk of the retail market for server products.

  • Is there a way to use Internal Mac Speakers with something stuck in the headphone jack?

    A while ago, I broke a pair of headphones in the jack of my Macbook Pro. This means I can't use the external speakers either, and it's very annoying. It's now been a year, and I have been getting by with a combination of using Wifi2Hifi, a USB audio adaptor, and switching to Windows to use my speakers. Is there any way I can override the Mac software to make my speakers available to use like they are in Windows? I lost my USB adaptor a couple days ago, and I really don't want to wait for a new one to come in the mail if I can just get my internal speakers to work. I would prefer to use Mac because I have 12,000 songs in my itunes and my external Hard Drive is formatted to Mac, so when I want to watch the movies I have stored on it, I can't do it in Windows.
    Also, I'm aware of the "Use Audio port for:" option, but I can't select this. I see the text, but there's no dropdown menu.

    If you have Office 2004, it won't run on Lion. You have three options:
    1. Upgrade to Office 2008 or 2011 for Mac
    2. Download the free Office suite Libreoffice
    3. Buy Apple's 'Numbers' (for spreadsheets), 'Pages' (for word processing) programs and/or 'Keynote' (for powerpoint) from the App store. Combined cost is still a lot cheaper than Office and they will read and export is all Office formats.
    A fourth option, if you can't live without 2004 for some reason, would be to revert to Snow Leopard.

  • Is there a way to use gmail via pop3 with nokia 60...

    is there a way to add ssl support to nokia 6070 becase i cannot manage to use gmail via pop3 because there is no ssl support service in this phone

    If the support isn't there, you can't add it yourself.
    However, you could try the Gmail Java app to read email:
    http://www.google.com/press/pressrel/mail_mobileclient.html

  • HT2864 Hi! is there a way of using my iPod nano with different Nike+ accounts?

    Hi!
    I no longer use my iPod for running since i now have my iPhone 4. I'd like to give it to my girlfriend who is just starting to run. But whenever i open iTunes (even with her account) it automatically connects to my NIke+ account and I can't find the way of linking it with my girlfriend's account.
    Is there any way of doing so? Could anybody please help me?
    Thxxxx

    No.  You can sync content directly from an iPod to another iPod or iPad.  The content you wish to transfer needs to be in your iTunes library first.
    B-rock

  • Is there any way to use Adobe Extension Builder with After Effects?

    I have been using Script UI and Javascript within the ExtendScript Toolkit to build panels for After Effects CC, but I like the way the Adobe Extension Builder works with Eclipse, and the power of including external libraries like JQuery. Is there any route to build extensions for After Effects with this or some similar solution?

    Hi Hallgrimur,
    I was checking the documentation for CC14 Extension SDK and found that the HTML5 extension development is available now for After Effects too. I could not find any update of Extension Builder though which would support the After Effects extension development. While searching I came across this thread, so was wondering if you might have any update on how to go about with the HTML5 extension development for After Effects. Thanks a lot in advance.

  • Are there any drivers to use NI PCI-1411 with programs other than Labview?

    I'd like to use my NI PCI-1411 capture card to capture images and/or videos outside Labview. Are there drivers available somewhere? E.g. TWAIN drivers?

    I am not aware of any drivers other than IMAQ, but the IMAQ drivers do include a C library along with the LabVIEW version. I would take a good look at what is available in the IMAQ drivers. They may have what you need.
    Bruce
    Bruce Ammons
    Ammons Engineering

Maybe you are looking for

  • I updated to 5.0 beta and the page on the screed is smaller than the previous version and I cant get the zoom to work to increase the text and pictures.

    the text and pictures is very small or at leat much smaller than in the prior version and the zoom will not make it bigger.

  • Miro line item

    Dear Forum, I would like to seek clarification on miro line item. Below are few scenario which I need help. 1) when PO number is entered, why item lines are still grey out? 2) when PO number is entered, item lines not grey out but quantity and amount

  • Background image instead of color for each sliding panel

    I'm working with sliding panels and trying to add some style to the page.  I have figured out how to put a different background color on each slide and even how to put a background image on the whole thing, but  I cannot figure out how to use multipl

  • X axis in Chart

    I have created a line chart where the y-axis is money amounts and the x-axis is years. My query used in this chart results with 3 different years and four money amounts for each year. My chart will only pick up the first money amount for each year. I

  • Year-to-date summarization

    Hi, I have to get the Year-to-date amount on an ALV output for a GL account. Is there any FM to do it?... Currently Iam just getting the output for the period that I put in selection screen. Thank you, SB.