Is there a utility that'll show Vdimm on a neo2

I'm sick of core centre lying to me and would also like a monitoring program that can actually read Vdimm. Is there such a utility out there?
Thanks.

You'll probably need to use a multimeter.
Even if CoreCenter wasn't bug-ridden, no one should really trust software to report these numbers, since they're at the mercy of how sensitive the voltage measurement chip is on the motherboard.
Given motherboard pricing wars, they use cheap parts for such non-essential things.
So, if you want it done right...you get the idea.

Similar Messages

Is there a utility that will show the actual ram voltage in Windows?

Sorry for the newbie question. ASUS had this utility that showed the actual ram voltage in windows. I don't think it'd work with an MSI motherboard. And I don't think any of the overclocking utilities show the actual ram voltage. The reason I asked was because the ASUS P5N-D overvolted my ram by .1 volts. If I set 2.2v in the BIOS, it would overvolt the ram to 2.3v. That's not exactly the greatest thing. I just wanted to check if my brand spanking new P7N Diamond is doing the ram voltage accurately. It should be right? Oh and I have cheapo Patriot memory ram. It's rated at 2.2 volts. Seems like all PC2 6400 ram is rated at 2.2 volts these days though. Maybe a 2.1v somewhere but that's becoming more and more rare. Thanks.

yeah... LOL. Everest shows what you've set it to. I can just look in the BIOS or just like remember 2 seconds into the past. :-P I guess there isn't something for that. Just as I thought. I wonder if I can trick the ASUS utility into thinking that I'm running an ASUS board. :-P Probably wouldn't work right anyway though.

Is there an app that will show a photo's metadata for the iPad?

It is said that "A picture is worth a thousand words" but without context it is only a picture. With context a photo can become a slice of life. Is there an app that will show the viewer the metadata that belongs to that picture?

Have a look in the App Store for "EXIF viewer".
There are quite a few free ones.

HT201541 Our Mac-Mini has gotten slower and slower. Is there a utility that would help speed it up?

Our 4 plus year old Mac-Mini has gotten slower and slower. Is there a utility that would help speed it up or is there another?

Hello! I’ve offered the steps below to similar posts in the past and they helped out getting to the solution (or at least find the cause). I suggest them to you too in this case. It will take you about 30 minutes or less to do these, depending on how bad the problem on your Mac is.
The goal here is to boot your Mac to the so-called Recovery partition where you’ll have a chance to repair the disk and the disk permissions using the Disk Utility and Password Utility. This might solve your issue and even if it doesn’t- it’s still a decent maintenance step to perform. These steps won’t erase your data or reinstall your Mac in any way if you follow instructions carefully.
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [cmd] + [r] Keep these keys on your keyboard pressed until you either see an Apple Logo with a loading bar or a spinning gear.
After a few minutes, you’ll be presented with a Utilities screen. This is the Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue]
Disk Utility will display your computer’s harddrive in the left column. The default name for it is “Macintosh HD” and is usually the second one from the top. Click on it and click on the [verify disk] button. This will check your “Macintosh HD” harddrive partition for errors. If found, click [repair disk] unless you have a Fusion drive in your Mac and it says [fix] instead of [repair disk] please tell us before you continue! For a screenshot of what I mean, check this article from Apple: http://support.apple.com/en-us/HT202574
4/ Once done with the verifying or repairing of your “Macintosh HD” click [repair disk permissions]
This will check your partition for permissions errors. A common myth about this feature is that it will fix all permissions issues on your Mac, which is not true, but it will fix most systemwide issues. Also, here is a list of error messages that you can safely ignore if they pop up:
http://support.apple.com/en-us/HT203172
5/ Lastly we shall do a permissions/Access Control List repair on specifically your user’s home folder with a somewhat hidden tool in the Recovery partition. Close Disk Utility and find the menu called “utilities” in the top left corner of your computer’s display. It’s in between the menus “edit” and “window” Don’t be confused with the menu called “os x utilities”
Choose Terminal. A somewhat old-fashioned looking window will pop up, waiting for a text command from you. This is the Terminal.
After the # type: resetpassword and press return. Note that there is no space between ‘reset’ and ‘password’
What you’ll see next is an rectangular window that gives you the option to reset passwords. We are not going to that, however. Instead, click on “Macintosh HD” at the top. In the pull-down menu below that, choose your user's accountname. Skip all the rest and at the very bottom click the [reset]-button.
A spinning gear will appear and may stay on for a second or several minutes. It’s hard to predict exactly how long.
If you have multiple users on your Mac, I advise you to repeat this step for all your users.
We’re ready to reboot your Mac now. Click on the Apple Menu and choose “startup disk” Choose to boot from “Macintosh HD” Please let us know if this solved your issue, or if the steps above did not work, or could not be performed for some reason.
If they worked I suggest you do these steps everytime your Mac becomes slow.

Is there a button that can show your deleted messages

Is there a button that can show your deleted messages

Add-ons are contained in Firefox; they don't have any access to programs running on your computer. The following add-ons can monitor your bandwidth usage in Firefox.
* https://addons.mozilla.org/firefox/addon/datafox/
* https://addons.mozilla.org/firefox/addon/minimeter/
Any good software firewall lets you control which programs connect to the Internet.
* https://en.wikipedia.org/wiki/Comparison_of_firewalls
If you need to see how much bandwidth various programs use up, look for a bandwidth monitoring tool.
* http://www.softpedia.com/get/Network-Tools/Bandwidth-Tools/

Is there a utility that cleans up itunes?

Is there a utility program available that automatically cleans up things like band names... The Hollies to Hollies... makes all the genre uniform for a group/performer, corrects spelling... etc???
Thanks

I am not aware of anything like that but you can do a lot of that in bulk in iTunes. When you select a bunch of tracks at the same time, do a Get Info on the batch, you can now change tags that will be applied to all the selected tracks.
So for example, you could select all the tracks by a band, get info on the whole batch then assign a single Genre to the whole batch. Or you could type in "Hollies" for the search term, get all the tracks that show up as The Hollies and just Hollies, select them all, then retype the band name ONCE to be applied evenly to all of them.
Patrick

Is there an app that will show your GPS history?

Are there any Mac apps that will show your iPhone's GPS history? I've tried iPhone Tracker but it crashes when loading.

Use an app that tracks your GPS movement and pull the data points accordingly.
That app would be...?

Is there a utility that can do this?

I have a few videos I watch every day for training purposes. What I'd love to be able to do is find some way where I black out everything else on my screen except the movie, so I can't see any other windows, can't see the desktop, nothing. I want to eliminate visual distractions.
now some will say "just go full screen", but I don't want to go full screen. The resolution doesn't support it and that's just too big and fuzzy. I want to keep it at about a half to a third of the screen, but I want that size displayed and then nothing else.
I seem to vaguely remember some utility that would do something like this but now I can't find it, and maybe I just dreamt it up. Anybody have any suggestions?

I'm using QuickTime Player 10.0.
Try the key sequence "Command-F" followed by "Command-1" to play the file at its "normal" size on a black screen.

Is there an app that will show show how many characters one uses in an SMS?

Apple are still not showing how many characters are used when one send an SMS, does anyone know why? and if there is an APP that will take care of this? Thanks

I'm not sure if it will work for international texting, but I use AIM to text my friends all the time.
Just put +1 followed by the phone number, including area code, without any punctuation, and it works for within the US. And when your contact replies, it goes directly to your AIM account.
There is also a way to send texts using your email client, and the replies get sent directly to your email inbox. There is a service called teleflip that will do it. Again, I don't know how well it works internationally.
The best thing to do would be to try both solutions out.

Is there an utility that allow "Apps" menu in menu bar?

Lo, all these many years and I still think the dock is inferior to the pre-X option of having all the apps in a pull-down menu under the apple. (Accomplished through third-pary utility, if I'm not mistaken.)
Is there a utlity today that puts the contents of the Applications folder in the menu bar?

And lo, all these years later there is still AppleScript and you should be able do that by writing a script and activating scripts in your menubar.
As I recall it looks/works exactly like that screenshot of Xmenu. Except I don't see Utilities on the Xmenu. Is it hierarchal, because AppleScript is?

Is there some utility that could wake a computer more than once in a day

I need to be able to bring my computer out of sleep when I'm not around to run some automator routines. The built in software in Energy Saver is great but it only lets you set your computer to wake once in a day. I probably need mine to work a couple of times in a 24 hour period.
Thanks
Kerry

Hi,
There is no limit to the number of times Sysprep can run on a computer. However, the clock for Windows Product Activation begins its countdown the first time Windows starts.
If you anticipate running Sysprep multiple times on a single computer, you must use the SkipRearm setting in the Microsoft-Windows-Security-Licensing-SLC component to postpone resetting the activation clock. Because you can reset the activation clock only
three times, if you run Sysprep multiple times on a computer, you might run out of activation clock resets. Microsoft recommends that you use the SkipRearm setting if you plan on running Sysprep multiple times on a computer.
Alex Zhao
TechNet Community Support

Is there a utility that documents our worksheet settings?

i.e. conditions, calcuations, sorting, worksheets used etc.
Same with Admin. Joins, hierarchies etc.
Thanks,
Dominique

Hi,
For workbooks you will have to use the d51wkdmp.exe utility supplied with Discoverer Administrator.
For documenting the EUL you can import and use 'The Discoverer V5 EUL' business area held in the EUL5.eex export file also supplied with Discoverer Administrator.
Hope that helps,
Rod West

Is there any report that can show tax rates per tax code per state

Hello Gurus,
I checked all standard SAP reports and they only list taxes based on the documents created. I am trying to develop a list of tax rates that are based on each tax code per state. Can some one suggest me how I can go about this.

Hi,
Are you using SAP to derive tax rates at Jurisdiction level or a third party like Vertex or taxware? I haven't come accross a situation where we configure SAP to maintain tax rates per state. It is connected to third party via RFC and the rate is derived based on the jurisdiction code however, we configure the jurisdiction code numbering and levels in SAP.
Thanks
Manoj

Is there any Enterprise Manager Utility that can help update the Hostname

I have installed An Oracle Database 12c and further planning to install Enterprise Manager 12c CC on top of this,
Since occassionally my system IP changes due to dhcp configuration, hence i prefer using hostnames instead of IP address and further update hosts.properties file iwthin C:\Windows\System32\drivers\etc\
further in case if i have to change the hostname of my machine, is there any utility that will help to update the hostname across properties files of all the Enterprise Manager components ?
Also when installing 12c EMCC, i understand there is a pre-requisite to deconfig dbcontrol.
In my case when i run from on Oracle 12c Database home, - emca -deconfig dbcontrol db -repos drop,
I get unkown command error.
C:\app\Oracle\product\12.1.0\dbhome_1\BIN>emca -deconfig dbcontrol db -repos drop
'emca' is not recognized as an internal or external command,
operable program or batch file.
C:\app\Oracle\product\12.1.0\dbhome_1\BIN>
kindly guide from where do i run the deconfig command or whether is it really required or not

Hi,
Just an update further.
The 12 EMCC installation of all components completed except for Agent Configuration Assistant.
View Log of Agent Configuration Assistant :
~~~~
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = E:\EnterpriseMgr\agent\core\12.1.0.3.0\oui\jlib\srvm.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\jlib\agentConfig.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\jlib\emConfigInstall.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\sysman\jlib\emagentSDK.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\modules\oracle.http_client_11.1.1.jar;E:\EnterpriseMgr\agent\core\12.1.0.3.0\sysman\jlib\log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=E:\EnterpriseMgr\agent\core\12.1.0.3.0
2.AGENT_PORT=
3.ORACLE_HOSTNAME=NTEJANI-VBOX1.in.oracle.com
4.b_doDiscovery=true
5.AGENT_BASE_DIR=E:\EnterpriseMgr\agent
6.AGENT_INSTANCE_HOME=null
7.s_hostname=NTEJANI-VBOX1.in.oracle.com
8.OMS_HOST=NTEJANI-VBOX1.in.oracle.com
9.b_startAgent=true
10.b_secureAgent=true
11.b_chainedInstall=true
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4899
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : NTEJANI-VBOX1/127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:Trying for host : NTEJANI-VBOX1/10.180.63.214 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent: The agent port is 3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=E:\EnterpriseMgr\agent\agent_inst
2. agentBaseDir=E:\EnterpriseMgr\agent
3. oraHome=E:\EnterpriseMgr\agent\core\12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:E:\EnterpriseMgr\agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for E:\EnterpriseMgr\agent\core\12.1.0.3.0 and hosts=NTEJANI-VBOX1.in.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with E:\EnterpriseMgr\agent\agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into E:\EnterpriseMgr\agent\core\12.1.0.3.0\install\oragchomelist
INFO: oracle.sysman.top.agent:E:\EnterpriseMgr\agent\core\12.1.0.3.0:E:\EnterpriseMgr\agent\agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: cmd /c set NEED_EXIT_CODE=1&&E:\EnterpriseMgr\agent\core\12.1.0.3.0\bin\emctl.bat deploy agent -L -o NTEJANI-VBOX1.in.oracle.com:4899 -N E:\EnterpriseMgr\agent\agent_inst NTEJANI-VBOX1.in.oracle.com:3872 NTEJANI-VBOX1.in.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: E:\EnterpriseMgr\agent\core\12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : E:\EnterpriseMgr\agent\agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from E:\EnterpriseMgr\agent\agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'Asia/Calcutta' is installed in E:\EnterpriseMgr\agent\agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: cmd /c set NEED_EXIT_CODE=1&&E:\EnterpriseMgr\agent\core\12.1.0.3.0\bin\emctl.bat deploy agent -L -o NTEJANI-VBOX1.in.oracle.com:4899 -N E:\EnterpriseMgr\agent\agent_inst NTEJANI-VBOX1.in.oracle.com:3872 NTEJANI-VBOX1.in.oracle.com completed with status=0
INFO: oracle.sysman.top.agent:Exit value -1
INFO: oracle.sysman.top.agent:AgentUpgradeMain CreateService FAILED: The specified service already exists.
INFO: oracle.sysman.top.agent:Failed in creating service Oracleagent12c1Agent
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
~~~
I tried Starting the agent and it started successfully. But pingOMS failed and also in agent status,, it shows OMS unreachable
below is the commands i executed
~~~~
E:\EnterpriseMgr\agent\agent_inst\bin>emctl start agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
The Oracleagent12c1Agent service is starting..................
The Oracleagent12c1Agent service was started successfully.
E:\EnterpriseMgr\agent\agent_inst\bin>emctl pingOMS
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
EMD pingOMS error: An internal error has occurred at the agent: "unable to send response". Check the agent's error logs for details.
E:\EnterpriseMgr\agent\agent_inst\bin>emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.3.0
OMS Version       : (unknown)
Protocol Version : 12.1.0.1.0
Agent Home        : E:/EnterpriseMgr/agent/agent_inst
Agent Binaries    : E:\EnterpriseMgr\agent\core\12.1.0.3.0
Agent Process ID : 3884
Parent Process ID : 6060
Agent URL         : http://NTEJANI-VBOX1.in.oracle.com:3872/emd/main/
Repository URL    : https://NTEJANI-VBOX1.in.oracle.com:4899/empbs/upload/
Started at        : 2013-09-06 11:23:37
Started by user   : NTEJANI-VBOX1$
Last Reload       : (none)
Last successful upload                       : (none)
Last attempted upload                        : (none)
Total Megabytes of XML files uploaded so far : 0
Number of XML files pending upload           : 0
Size of XML files pending upload(MB)         : 0
Available disk space on upload filesystem    : 82.39%
Collection Status                            : Collections enabled
Heartbeat Status                             : OMS is unreachable
Last attempted heartbeat to OMS              : 2013-09-06 11:25:36
Last successful heartbeat to OMS             : (none)
Next scheduled heartbeat to OMS              : 2013-09-06 11:26:06
Agent is Running and Ready
E:\EnterpriseMgr\agent\agent_inst\bin>
~~~
Kindly guide.
Regards,
Nayan

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?
I need to see who is consuming the most bandwidth and limit that user/device. A very simple and dare I say it, legal, moral, and normal wish.

They are not overloading the Airport. They are overwhelming the capacity of your Internet connection.
No. It's not "shared equally". That's not how packet switched networks function.
Most consumer grade routers do not have the ability to restrict bandwidth use on a per machine basis. You need relatively expensive (but readily available) equipment to do that.
How many people are on the network? It can't be that hard to hunt them down.

Is there a utility that'll show Vdimm on a neo2

Similar Messages

Maybe you are looking for