Is there a utility to list the new T Codes in ECC 6.0 compared with 4.7

Hello:
I am aware of  using SCMP and comparing the TSTC table for new Transactions.  Is there any OTHER utility provided ?
Thanks

Hi,
You would need to perform the steps from 2a to 2d in transaction SU25.
When you run these steps one by one, you will be getting the list of new and old transactions listed.
You can adjust them accordingly.
Regards,
Imran

Similar Messages

  • Does anyone know if there is an adapter for the new nano iPod to connect to a FS-2 iPort?

    Does anyone know if there is an adapter for the new nano iPod to connect to a FS-2 iPort?

    IIRC the very original Bose Dock had the old 30 pin wiring and was designed initially for the iPod
    If you have that version then you will need a converter to the later wiring ( sans firewire) as in Scosche .
    and then the 30 pin to lightning Apple adapter
    In theory it should work but who knows.
    If you have a later one which already works with current devices then just the lightning adapter
    It is important to get the genuine Apple adapter I have several and all work fine in several scenarios
    Avoid the eBay knock offs most only charge

  • I recently updated to version 5.0, however, when I open up a link in a new window, there is no address in the new window's address bar, just a blank box.

    I recently updated to version 5.0, however, when I open up a link in a new window, there is no address in the new window's address bar, just a blank box.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Can any one guide me in this. I would like to start my certifications in VM Ware. Especially in cloud. I saw there is an exam for the new starters .(VCA). it is enough or should I go for any other Training in MCSA (Server).

    Can any one guide me in this. I would like to start my certifications in VM Ware. Especially in cloud. I saw there is an exam for the new starters .(VCA). it is enough or should I go for any other Training in MCSA (Server).

    VCA is to make sure that you have a understanding of the general concepts before you go to do a full VCP course.
    I have taken the VCA datacenter and it was very much a case of: What product does what?
    You wouldnt get a job on merit of having a VCA where as you would with the VCP.

  • After you increase the page size with Ctrl/plus, is there a way to keep the new setting?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/845611]''
    My new laptop has great features but a smaller screen. Changing the resolution makes everything look awful. Using Ctrl/plus to increase the page size in Firefox solves the problem, but you lose the new setting when you go to a different page. Is there a way to keep the new setting until you reverse it with Ctrl/minus ?

    There are some add-ons that can be used to change the zoom level on all sites, for example:
    * NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

  • Is there a way to list the next 5 appointments on my calendar in the notification area?

    is there a way to list the next 5 appointments on my calendar in the notification area?

    I had that on but it doesn't show anything the reminder only shows up if the event has a reminder set for a specific time. I want to straight up see the next 1,5,... Events in list form. This may not be possible but it would be great. Just like when you are in calendar and display by list.

  • Is there any way to update the new pricing automatically?

    Hi,
    with reference to the below link i have some queries
    Re: is there any way to update the new pricing automatically?
    i din understand the below point mentioned in the thread
    You see this option is changes sales order(VA02), item pricing, update tab at the bottom.
    can u pls explain ?
    Thanks in advance.

    Hi,
    First of all it is not at all possible that you have added something to user exit for sales order and that is affecting billing.
    While billing try
    USEREXIT_PRICING_PREPARE_TKOMP
    instead of USEREXIT_PRICING_PREPARE_TKOMK.
    Also, you need to sit with the SD functional person to check and decide upon what config is to be adopted in copy controls for pricing type. In case you wish to do everything through the user exit then std controls need to be set in a way that whatever is in sales order should come up in billing, inclusive of manual conditions unchanged.
    In case of short dump issues, the code is not written at the right place. Before your code write
    break-point
    which will give you an idea of what is happening at runtime while creating billing document in debugging mode.
    Hope this helps.
    Regards,
    Amit

  • My macbook is 4 years old, i havent bought any upgrades but now i cant download the new itunes. Can i buy one upgrade and will it work or is there a way to get the new itunes?

    My macbook is 4 years old, i havent bought any upgrades but now i cant download the new itunes. Can i buy one upgrade and will it work or is there a way to get the new itunes?

    Even a four-year-old MacBook should have come with Mac OS X 10.5 Leopard. Leopard can run the latest version of iTunes; it will download and install pretty much automatically if you run Software Update.
    You might first have to be sure that you are running the latest version of Leopard, which is 10.5.8. This, too, will download and install for you if you run Software Update. Just keep running Software Update until there is nothing left to download and install (you might have to run it more than once because some updates require previous updates to be installed first).
    If you have a version of Mac OS X earlier than 10.5, then you can't run the latest version of iTunes. You will need to buy a more recent version of Mac OS X. You must be running at least 10.4 Tiger, and you can upgrade directly to Snow Leopard from Tiger. Apple still sells Snow Leopard for about $30 and you might find it slightly less at a retailer or on eBay. After upgrading to Snow Leopard, you will be able to upgrade to Lion using the Mac App Store for another $30 or so if your MacBook meets the minimum system requirements.

  • I wish to know whether the new NVidia Quadro K2200 graphic card is compatible with the Mercury Playback Engine.  Thanks

    Hi.  I wish to know whether the new NVidia Quadro K2200 and K4200 are compatible with the Mercury Playback Engine in Adobe Premiere Pro CS6.  My old graphic card NVidia Quadro FX580 is not listed and not effective apparently because Mercury Playback Engine is effective as from 1Gb RAM. I use a HP workstation and AVCHD (AVCCAM) and DSLR full HD.  Thanks.
    Message was edited by: Brittany Mauriss
    Deleted private user information (email address)

    It is compatible, but why anyone would want such a weak and slow card at a premium price is beyond me. See Tweakers Page - What video card to use? and GeForce GTX980 vs Quadro k4200 (2200) #2.

  • I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard.

    I use an external hard drive as a Time Machine back up, but I want to use another external hard drive to save movies, photos on it, but it won't give me the option to save anything on the new external hard drive. Nothing is wrong with the external hard. 

    Hi Clarkett99,
    To use an external hard drive for your iTunes library, see the steps in this article -
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/HT1751
    iPhoto can be used in a similar way, follow the steps in this previous discussion -
    how do I save photos and their albums...: Apple Support Communities
    https://discussions.apple.com/thread/3744259
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    ok, my former computer crashed and i have a new one. i would like to sync my ipod with the new one, but it wont allow me to with out removing all of the data on it. How can i fix this?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Not able to post depreciation in the new co code

    Hi
    I am trying to post the Depreciation using AFAB into a newly created Co Code for the first time. But the system throws the below error asking me to post to the last month of the previous year.
    You can only post in new year after closing the previous year.
    Message no. AA687
    Diagnosis
    You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
    Procedure
    Post to the last period in the previous year first.
    But this is a new co code which goes life in the middle of the current year. Then why is it asking to post the depreciation for the last month of the previous year.
    Also, I have closed the last year in asset accounting without any issues using AJAB. But still why is it showing this error. Please help me how to overcome this error and post the depreciation for the first time in the new co code.
    Thanks
    Gemini

    Hello All,
    My Fiscal Year is from November to October. My transfer date is 31 Oct 2013. Oct is my last period (Period 12) for FY 2013.
    I have uploaded legacy Asset values in the month of Febraury (Period 4 of FY 2014) and now trying to run the depreciation run in the new co code for the first time. But I am facing the error and system is not allowing me to post the depreciation.
    When I opended the Asset year 2013 and the FI Period for 2013 also and tried to post the depreciation but it says no values exist for posting depreciation in that period. Then I closed the Asset Year for 2013 using AJAB and also did the asset value transfers to the new year 2014 using AJRW.
    Again tried to post depreciation using AFAB in period 1 of 2014 but no use. It gives the same error :
    You can only post in new year after closing the previous year.
    Message no. AA687
    Diagnosis
    You want to post in a new fiscal year. However, a posting must have been made in the last period in the previous fiscal year before you can do this.
    Procedure
    Post to the last period in the previous year first.
    But the previous FY 2013 is already closed. Looks peculiar.
    Please suggest since this is very crucial for us to go live.
    Thanks

  • HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

    I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

    If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

  • When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?

    Hello Adobe,
    When will come the new raw version update for Adobe Lightroom 4 with Nikon D750 support?
    Best regards
    Frank

    There won't be an update for Lightroom 4. The only way you can work with your D750 raw files is to use the free standalone DNG converter to create DNG copies. If you want to be able to work on the NEF files then you will have to upgrade to Lightroom 5. Lightroom does not use the Camera Raw plug-in. Everything is part of the Lightroom program. If you want to stay current with Lightroom then you need to follow the update/upgrade path. That means purchasing each new major version of Lightroom or subscribing to the creative cloud plan.

  • Hello! The new version of Firefox I have a problem with opening the site VKontakte. The browser displays the following error: "Firefox has determined that the s

    Hello!
    The new version of Firefox I have a problem with opening the site VKontakte. The browser displays the following error: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
    Sincerely, Vsevolod.

    You're welcome

Maybe you are looking for