Is there a version of PS that can adjust a batch by a Historgram setting?

Is there a version of PS that can adjust mass numbers of high res images for Contrast and Brightness but at the same time constrained by a Histogram setting?
I have thousands of hi res .sid or .png images that are all of various degrees of brightness and need to be brightened to different degrees along with contrast changes. Although it can obviously be done individually, I am seeking a batch command that can do this without over correcting. Is there any PS version that can analyze each photo and make brightness and contrast corrections but constrained by a histogram setting? Because some photos need twice the brightness or contrast than others, using that batch same command will result in many of the photos being over corrected. Thus, I am looking to adjust via an auto Histogram analysis of each photo to avoid over correction. Is there any software that does this?

Yes, it can be installed on a network. I teach Dreamweaver at a university in London, so I know that it definitely works. But I'm not a systems admin, so I don't know the details of how it's done. However, the following should be a starting point for your sysadmin: http://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.

Similar Messages

How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

How do I update the browser on the MacBookPro? I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

Hi kwalker08865,
It would appear that the most recent version of Safari that is compatible with OS X 10.5.8 would be Safari 5.0.6. If this would meet your needs, you can find more information and a download link on the following page:
Safari 5.0.6 for Leopard
Regards,
- Brenden

Is there a version of iMovie that will import ProRes files?

Is there a version of iMovie that will import ProRes files?
Final Cut Pro does, but does iMovie HD? And which version?

Luca, I'm not sure acceptable life in iMovie at 60p is possible, and not sure about YouTube at this point either.
(I have a 2.66GHz Core i5 iMac with 8GB ram running Snow Leopard OSX 10.6.8)
My first export using QT x264 1080 59.94, auto key, +CABAC, crashed iMovie, but later times worked ok.
The non-QT export 1080 HD computer - puts out a 29.97 fps movie with lots of motion artifacts.
I checked plist - videoframerate and newProjectFrameRate were 30, so changed to 60 and redid the import, title, finalize, exports, and share to YouTube.
The non-QT export 1080 HD computer - still put out 29.97 fps.
QT Export x264 1080 framerate 59.94 fixed, auto key, +CABAC put out a 43 Mpbs 59.94 H.264 QuickTime movie which occasionally stutters, but it appears to have the same quality as the original 1080p60 footage.
Moving to a 1080p60 camera has been frought with disappointments. The latest VLC can play my raw video but it often stutters (from no times to lots of times).
Repackaging as MP4 using ffmpeg -i in.MTS -vcodec copy -acodec copy out.mp4 doesn't get rid of the stuttering.
Toast Video Player also has occassional stutters.
Converting using Handbrake does not eliminate the occasional stutter.
QT playing the prores transcoded source footage claims 255 Mbps data rate 59.94 fps, and it also stutters sometimes, sometimes not.
The Share... YouTube video: http://www.youtube.com/watch?v=mByr3Y3wfz4 which appears to only be 30 fps (the mp4 download is 30p).
The 60pQT export uploaded is at: http://youtu.be/Hv1TgcoaxfM also downloads as a 30p MP4 so I have no idea what is going on.
"(i)Life" in 60p seems a bit complicated.

HT4168 Is there a version of Pages that allows you to paste a webpage?

Is there a version of Pages that allows you to paste a webpage into Pages and retain the text that's on the webpage? Pages-09 drops about 90% of the web-page text, when a webpage is pasted into Pages.

1. You can print webpages to pdf in Safari and retain all the links
2. Pages does retain most of the formatting your problem is probably the way you selected it and insufficient width in the page to fit the layout
3. There are some objects and code that won't translate to DTP document, Pages is not a browser
4. If all you want is the text use command option shift v
Peter

Is there any iPhone midi controller that can control logic just by USB?

is there any iPhone midi controller that can control logic just by one usb insert to the mac?
Free ones would be the best!
Thanks!

Although not USB, there are a couple of iPhone/Touch apps that can control the Mac using a wireless network. MobileMouse (free & paid versions) do a great job, as well as Logitech's TouchMouse. Both will allow you to use the touch screen to control the mouse, which essentially gives you the ability to do many things in Logic. I've used them, for example, to begin a recording, which frees me from being near the computer.

HT4990 is there a version of cards that works with ios5.1.1

is there a version of cards that works with ios 5.1.1

http://www.stuffit.com/mac/expander/
I'm pretty certain that I got my version of stuffit, which has worked excellently on my Intel MBP, from that site. I downloaded it around the time when I first got the laptop, so I'm pretty sure that's the site.
If it's not let me know and I can give you links to a different site, or I can just e-mail you the installer file directly.
If it doesn't work for any other reason, or does the encrypted thing that you stated, let me know I'll look into it.
Peace
Bweb

Is there a version of Pages that actually *does* something?

My biggest needs are to be able to compare documents and find/replace with wildcards. Is there a version of Pages that does this, or is Pages just an expensive version of Bean? I'm thinking of just tossing iWork into the trash and, despite a few concerns, just buying MS Word:Mac. I was hoping to give my support to Apple, though, but I need word software that actually doesn't stop me in my tracks every three seconds.
Any advice before I follow through would be fantastic. Thanks!

Pages does't do wild card searches, and that's pretty much that.
But you knew that already.
What folks tend to forget is that just below the visible surface of their interface, most OS X applications are full participants in the AppleScript underworld. Whenever you find yourself cursing the engineer who failed to include an incredibly useful feature in the app you're using, remember that a DIY solution might be a lot closer than you think.
Pages, for example, has a fairly comprehensive AppleScript dictionary, and can take advantage of the usual scripts menu interface as well as any application. This makes it possible to extend the program to do just about anything, including (especially) activities involving other applications. And note that to AppleScript, the entire Unix subsystem is just one more application available to do whatever it can do for any purpose you can imagine. Pages has access to GREP, SED, and all the rest, just waiting for you to tell it what to do.
If you're a complete stranger to AppleScript and in an "I want what I want and I want it now" mood, this may not be a good time to invest in learning new tricks. On the other hand, if you love the application except for the way it leaves the cap off the Find & Replace toothpaste, it might be worth it to you to pursue therapy for that one little quirk rather than go find a new girl/boy friend.
Keep in mind, too, that AppleScript is enormously seductive for anyone who wants it his/her way, and there are vast numbers of geeks out there willing to code just about anything for no more than the chance to do some good, show off their smarts, and maybe have a case of preferred microbrew.
While the site seems to be Having Technical Difficulties of late, macscripter.net is still a great resource. Not least of all because if something has annoyed you enough to go looking for a solution, it's likely annoyed someone else enough to have already created one.
-Bryan

I only use Windows XP, is there a version of Lightroom that will work with XP

I only use Windows XP, is there a version of Lightroom that will work with XP

Yes if you want to run Version 1....you can still download version 1.4.1 (the last update to Version 1), and your serial number would be good for that.
But if you want to run Version 2 or Version 3 you'll need to buy a new license (i.e. a new serial number), but if you have a valid serial number from any prior version you only have to pay for the upgrade license for the later version, not the full license.

Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?

There are many a thousands of people who are producingvideos on completed DVDs. As an amateur videographer using iMovie first nowusing Final Cut pro to produce completed ready to distribute DVDs, I find ithard to believe at the meeting you mentioned anyone with common sense wouldhave explained the scenario above. On an amateur level so many folks have beencreating videos of Weddings, Home Movies, and many different Special Events. Onin particular are sports events. I shoot a sports event like Mix Martial ArtsEvents utilizing several video cameras. Then editing with Final cut Pro andsometimes iMovie. All of my completed videos that have been edited in either ofthese two programs are shared (like hand in glove) with iDVD. Short of steppinginto the commercial world Apple has deleted many people from producing a semiprofessional looking product.
I do not know if the can be answered here in the format buthere it goes!!
Simple question. Since apple has extinguished iDVD Are thereany other Software programs that can produce the end product iDVD did? Googlesearches with years of outdated info does not give good references. Withoutlooking to go commercial, the Apple Macintosh Computers built internal Softwareprogram like iDVD is the only program I know of that can help folks on mylevel!!
It doesn't seem there are any programs that takes off fromwhere iDVD left off. My end products (complete videography from start tofinished printed and burned DVD) needs to have the mapping and control usingthe semi professional look iDVD gave!
Have any ssuggestions?

Thank you Klaus 1
I have 4 latest Macs All have iDVD. The question was not where to get iDVD.
The question for anyone who knows is: Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did?
I appreciate your input but it realy does not answer the question. iDVD will soon not be able to work with newer versions of Macs as it has been left behind by Apple!
Once again:
It doesn't seem there are any programs that takes off from where iDVD left off.
My end products needs to have the mapping and control using the semi professional look iDVD gave me.
Imovie cannot do this. More importantly imovie cannot save the project to Video_TS folders like iDVD did.
Anyone have suggestions?
My full post is just below:
There are many a thousands of people who are producing videos on completed DVDs. As an amateur videographer using iMovie first now using Final Cut pro to produce completed ready to distribute DVDs,
On an amateur level so many folks have been creating videos of Weddings, Home Movies, and many different Special Events. One in particular are sports events. I shoot sports event like Mix Martial Arts Events utilizing several video cameras. Then editing with Final cut Pro and sometimes iMovie. All of my completed videos that have been edited in either of these two programs are shared (like hand in glove) with iDVD. Short of stepping into the commercial world Apple has deleted many people from producing a semi professional looking product.
I do not know if anyone can this question but here it goes!!
Simple question. Since apple has extinguished iDVD Are there any other Software programs that can produce the end product iDVD did? Google searches with years of outdated info does not give good references. Without looking to go commercial, the Apple Macintosh Computers built internal Software program like iDVD is the only program I know of that can help folks on my level!!
It doesn't seem there are any programs that takes off from where iDVD left off. My end products (complete videography from start to finished with printed and burned DVD) needs to have the mapping and the control by using the semi professional look iDVD gave!
More importantly imovie cannot save the project to Video_TS folders like iDVD did. Something for folks like myself who need this to burn to our multi burning DVD all in one printers!!
Anyone have suggestions?

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Is there any fuction or bapi that can print the report automatic?

Dear All
I want to print the report( generated by command write ) automatic.
Is there any function or bapi that can do it?
Thank you in advance.

Hi,
Please try this.
report ztest_auto_print.
DATA:L_PARAMS TYPE PRI_PARAMS,
       L_VALID TYPE C.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
         IMMEDIATELY                  = 'X'
         LINE_SIZE                    = 220
         RELEASE                      = 'X'
         MODE                         = 'CURRENT'
         NO_DIALOG                    = 'X'
       IMPORTING
*     OUT_ARCHIVE_PARAMETERS       =
         OUT_PARAMETERS               = L_PARAMS
         VALID                        = L_VALID
       EXCEPTIONS
         ARCHIVE_INFO_NOT_FOUND       = 1
         INVALID_PRINT_PARAMS         = 2
         INVALID_ARCHIVE_PARAMS       = 3
         OTHERS                       = 4.
      IF SY-SUBRC <> 0.
      ENDIF.
"But it will take default printer from user settings
      NEW-PAGE PRINT ON   PARAMETERS L_PARAMS NO DIALOG.
       write : 'print is on'.
      NEW-PAGE PRINT OFF.
Regards,
Ferry Lianto

Is there a version of iTunes that is compatible with Windows 8.1?

Is there a version of iTunes that is compatible with Windows 8.1?

Thanks! The procedure worked great for me (using iTunes 10), however there was one caveat. I also had to edit “AppleMobileDeviceSupport64.msi” with Orca and change the entry in “LaunchCondition” from
VersionNT64>=600
to
VersionNT64>=501
in order for the Device Manager driver update procedure to work, and iTunes to recognize my iPhone4. Prior to doing this, only “digital still camera” was displayed in the “imaging” entry in Device Manger. Once I did the above, “Apple Mobile Device USB Driver” was listed, and the procedure worked as written.

Is there a version of Pages I can download for ios5.1.1?

Is there a version of Pages I can download for ios5.1.1?

You can check.
App Store: Downloading Older Versions of Apps
http://tinyurl.com/meqxplg
App Store: Install the latest compatible version of an app
http://support.apple.com/kb/ht5919
Apple’s iOS App Store now offers ‘last compatible’ versions of apps for older devices
http://appleinsider.com/articles/13/09/17/apples-ios-app-store-now-offers-last-c ompatible-versions-of-apps-for-older-devices
There may be an alternate word processor you can use.
Look at the Rccharles answer on this post.
https://discussions.apple.com/thread/6033082?tstart=0
 Cheers, Tom

Is ther a BAPI or RFC that can read any table ?

I want to read 35 tables in SAP database. Is ther a BAPI or RFC that can read any table ?
If I use RFC to read these tables, I will write a lot of codes. It may be a large work.

Check these FM
RFC_READ_TABLE
RFC_GET_TABLE_ENTRIES

Latest version of OSX that can be loaded into a MBAir with 1.6Ghz Intel Core 2 Duo.

what is the latest version of OSX that can be loaded into a MBAir with 1.6Ghz Intel Core 2 Duo. Currently have 10.7.5

To use Mountain Lion or Mavericks you must have at least a MacBook Air2,1 which you can check by clicking the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware and what does it show for the Model Identifier?

Is there a version of PS that can adjust a batch by a Historgram setting?

Similar Messages

Maybe you are looking for