Is there a vi to manipulate a 2530 switch?

I'm working on a new PXI system that has a PXI-2530 and a PXI-4070 DMM. We have signals coming in to our 2630 block and want to know how to switch them so we can read the signals in the DMM one at a time.
Are there VIs to do this? If so, how can I get them?
We are using Windows XP and Labview 8.0.

Refer to the NI Switches help under Start>>All Programs>>National Instruments>>NI-Switch>>Documentation.
You will find information about programming NI switches.
Guy Ferraro
Switch Product Support Engineer
NI - USA

Similar Messages

Is there a way to identify manual log switches?

Hi!
A while ago I upgraded a 10g database to 11.2.0.2 64 Bit Windows.
During the Upgrade we realized that redo logs were configured really small (~10MB) what resulted in a lot of log switches (a few hundred per day). So we adjusted redo log size to 100MB and set archive_lag_target to 1800.
The amount of log switches went down a little but less far than we expected it. After further analysing the situation we recognized that Oracle is switching logs far before reaching the 100MB log size (and also far before reaching 1800s). All the archived logs have a size of about 15MB. I know that 11g invented something like "preemptive log switching" that switches logs round about 20% before reaching the maximum value (if I remember it correctly..). But switching already at 15% of the maximum size seems strange to me...
I couldn't find any helpful stuff on Google or Metalink about that topic but today I had a different idea: what if it's the application software that's doing manual log switches?
(I have no idea why it should do that but I can remember that the application user does require the sysdba privilege - don't ask me why, I didn't write it, I won't defend it...)
So I checked the alert log but unfortunately I had to realize that there is no difference between an automatic switch and a manual one (only alter system archive log... does get an extra line).
So my questions are:
1) Does anybody know a way of distinguishing between an automatic log switch and a manual one? Is there a table or another logfile where this information is recorded?
2) Has anybody experienced a similar situation where Oracle is switching the logs way before reaching the maximum size?
Best regards,
Marcus

lebigmac wrote:
1) Does anybody know a way of distinguishing between an automatic log switch and a manual one? Is there a table or another logfile where this information is recorded?
Off the top of my head - I think the only way to do a manual log switch is to issue "alter system switch log file", and I think that any "alter system" command is written to the alter log in you version of Oracle. (I really ought to check both statements before posting this, but I've been up since 2:30 am).
2) Has anybody experienced a similar situation where Oracle is switching the logs way before reaching the maximum size?
It's very common with recent versions of Oracle when private redo threads come into play; but your example seems a little exaggerated. The log file switch has to start when there is enough space left in the log file for all the public and all (or maybe it's the previously used - i'll have to check my book) private redo threads. You could check x$kcrfstrand to see what this sizes look like: http://jonathanlewis.wordpress.com/?s=private+thread
Regards
Jonathan Lewis

Is there any event that triggers when you switch between components?

is there any event that triggers when you switch between components?
like for example... when i switch between components, i need a function to fire everytime i switch...
ive tried show, hide, and initialize... and none of them work...
any ideas or help is greately appretiated!!

Depends on what you are trying to do,
you have mouseover and mouseout and mouseclick events which you can use on the component and write code to deal with what you want to happen when you change focus. You have keypress event which would allow you to monitor tabbing between components, remember that in most events the currentTarget and target values will give you the information you need to handle component interaction.
so
[Bindable] private var CurrentObject: Object; <------- use this as a pointer to what ever object you are currently focused on or just to indicate things have changed
addeventListener(MouseEvent.CLICK,myCompponentSwap);
protected function myComponentSwap(e:event): void
    if (CurrentObject !=e.currentTarget && CurrentObject != null)
         do what you want becuase a component switch just happened
    CurrentObject = e.currentTarget;
Hope this gets you started.
David

Is there a way to disable automatic bluetooth switching?

im sure the topic title is a little confusing. so let me elaborate. i have this jvc bluetooth device that has a 3.5 input to basically make your device comout of the speaker or media center that is connected to the bluetooth device. i can either connect the 3.5 cable to my itouch, or the bluetooth device. when connected to the device directly, the sound quality suffers since its bluetooth. but you can also control the music by connecting the 3.5 to the itouch directly and crol the music with the device. the problem is that everytime i push the button to pause or skip, he ipod things im using the bluetooth device and goes back into bluetooth mode everytime i press a button. is there a way to disable this auto switch. the ipod thinks it knows better, by thinking i want to use bluetooth sound, and keeps switching the source everytime i skip a song. then i have to use that little source switcher on the bottom right corner to switch it back.

No way that I know of

Is there a way to recover contacts after switching from Samsung S3 to I-phone 4s

is there a way to recover contacts after switching this weekend from Samsung s3 to i-phone 4s

where they google contacts? or phone contacts?
google contacts can be exported and then imported into ios, search the net
if they were phone contacts you had to use vze method

I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.

Post in the iMovie forum.

Why is there an $50-80 upgrade fee to switch to quantium?

Why is there an $50-80 upgrade fee to switch to quantium? Why there even be any fee to upgrade if im intalling it myself? I want to get the better DVR but i dont know if its worth paying the ugrade fee ontop of paying like $11 more a month on top of my current DVR change.

I beleive that some cell phone providers are charging upgrade fees as well when you upgrade your phone.
So unless you want to keep jumping providers or not get new functionality, you are stucking paying upgrade fees.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Is there any way to manipulate PDF documents in Adobe Reader?

I need to manipulate a scanned document that is automatically saved as a PDF from our scanner. Is there any way? I have adober reader * becuase I havent updated yet. Do I need to do so? Thanks for any help!

Again, not with "Reader".
You could find an OCR application if you want to convert it to text or you could get ADobe Acrobat and convert it to many different formats.
eknz99 wrote:
Is there any way to convert a scanned PDF file?

Is there any way to manipulate groups????

Or can I only view information for the logged-in user?
I need to display all the information for all users belonging to a group in one shot. It appears from what Ive read so far that I'd have to reconnect/login for each user to collect this info. I think that would be bad. Am I missing something?
Thanks!

Hi Srinath,
Thanks for your response.
I am interested in modifying only few entries in credential map.in order to achieve this should i get entire credential map value as string,do the string parsing and update the values and map the entire value again on the credential map? or Can we update only interested entries directly?
Let us consider below example i just want to remove second line pro-grammatically from 'RIDCTest' without mapping entire values once again. is this possible?
abc, admin
xyz, sysmanager
|#all|, %%
\@|#all|, \@%%
deployer, contributor
Can you please share Service reference guide or anything which will have more details about editing credential map using RIDC?
Thanks,
Suresh K

Is there a method or app to quickly switch between staff networks in the same building?

We have a pretty standard network at my job, we have 5 staff networks, Staff A, Staff B, etc. Obviously some networks work better in different parts of the building, but I find that my macbook air tends to hold onto a weaker network and I have click on the wifi icon in the menu bar, wait for it to look for networks then click on the appropiate network. I was just wondering if anyone knew of a method or an app that makes it a little quicker for me to switch between these network. Maybe something similar to having network locations set. Thanks in advance.

You might almost achieve your goal simply by requiring password on wake from sleep. the password prompt will have an option there to switch users.
If you truly want to make it automatic,
it's possible but a bit tricky.
first download and install [Apple fast user switching applet|http://www.apple.com/applescript/accountswitcher/index.html]. install it on account of user 2 and set it up to switch to user 1 when you run it. call it, say, userswitcher.app and save it for example in user2 documents folder.
next, copy and paste the following into text editor. format it as plain text and save it as userswitcher.sh in Documents folder as well.
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
#!/bin/bash
idl=$"`ioreg -c IOHIDSystem | awk '/HIDIdleTime/ {print int($NF/1000000000); exit}'`"
wt=$3600
if [ $idl -gt $wt ]; then
open /users/$USER/documents/userswitcher.app
fi</pre>
in the above wt is the wait time before switching and it's currently set to 3600 seconds (1 hour). adjust that as needed.
next make the script unix executable by running the following terminal command
chmod 755 ~/Documents/userswitcher.sh
Finally, download and install [Lingon|http://tuppis.com/lingon> and make a launch daemon to run the above script every minute.
Message was edited by: V.K.

Is Extension Builder 2.1 using Flash compatible with Photoshop CC also in the future? (There are speculations, that it will be switched off, what will destroy my investment in that code)

I have codes a lot of stuff using Extension Builder 2.1 using Flash technology to be compatible with Photoshop CS6 and Photoshop CC.
There are speculations, that the support for this would be removed in Photoshop CC. This would destroy my investment in this code and my customers would not be able to use my products anymore, when they are using Photoshop CC.
Is there any workaround planed for customers using Photoshop CC to be able to run extension build with Extension Builder 2.1 and Flashbuilder 2.6 also in the future?

Can you supply a link?

There should be a way to easly switch between wifi and cellular data

I think apple should put wifi icon and cellular data icon on the notification bar so we can change between them easily or even closing them both. So other smart phone like Samsung did it from a long time and its really easier way so Apple as the greatest company in the smart phones field should do something for this ..

Read http://www.apple.com/ios/ios7/features/ and in particular the section on control centre. Maybe that does it for you but you will have to wait until Sep/Oct for the public release

IOS 7.0.3 in Apple note app there are not any next option to switch one note to other! Why?please solve this problem.

Please solve it with new update

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

Manipulate y-axis of built-in tooltip?

Hi all,
     Quick question...is there a way to manipulate the y-axis position of a tooltip without using a custom tooltip? For example, I have an image that has uses the builtin tooltip and I need to have it display above the image.
     I have a series of images, side by side, in the bottom right of my screen...when a user hovers over one of the images, because they are already grounded in the bottom right, the tooltip shows up and covers the images so the user has to really pay attention to the text to realize which image they are clicking.
<mx:Image id="cascadePic" source="{cascadeBtn}" buttonMode="true" click="cascadeWindows()" verticalCenter="0" right="70" toolTip="Click to rearrange your widgets staggered one on another." />
     I'm trying to see if there is an easy way to deal with this without having to dig into custom tooltips.
Appreciate the help!
Adrian

Nope. If you want to move the tooltip, tou need to use ToolTipManager:
http://livedocs.adobe.com/flex/3/html/help.html?content=tooltips_4.html
If this post answers your question or helps, please mark it as such.

LT12: how to manipulate the handling unit

Dear all,
This is my first message on this forum and I've seen many bright lights on this forum so I have high hopes of your response to my question : )
When I want to confirm a transfer order with trx LT12, 2 Handling Units (HU) are assigned (which can be seen in the lower part of the screen). I have 2 items in my active worklist (different storage units) and can modify some fields, including the HU. For some reason both items have the same HU (the upper one of the assigned HU). I would like the first item to have the first HU and the second item to have the second HU.
My question is simple (and I had thought this would be possible but I've tried a LOT and did not succeed, hence my cry for help here): is there a possibility to manipulate the Handling Unit before it is shown on the screen? I did not seem to find a suitable BADI/user exit.
Any help would be greatly appreciated. Thanks in advance for your efforts!
With kind regards,
Roel van den Berge

Dear Roel van den Berge
if iam not wrong you can achieve the same by TO split
Transfer Order Split
Use
To optimize processes in the warehouse, it often makes sense to split up putaways and stock removals into smaller packets according to certain criteria. In doing so, it is important, for example, to:
     Distribute the workload equally amongst the warehouse workers
     Optimize stock movements in the warehouse according to certain criteria.
The transfer order (TO) represents a work package and determines the actual workload for a putaway or stock removal. It can therefore make sense to split a single, extensive transfer order into several smaller transfer orders. During the TO split, the system creates several smaller packets from one large one.
During the TO split, the TO items are divided up between one or more TOs. A TO split does not however mean that the system divides individual items of a TO into smaller TO items.
Prerequisites
1.     You define the criteria according to which the TO split is to occur in the Customizing for Warehouse Management under Activities  Transfers  Processing Performance Data/TO Split  Define Profiles.
a.     To define a TO sort profile, choose Sort profile for TO splitting.
In the sort profile for the TO, you define the criteria according to which you want to sort the items in a transfer order before the actual split.
For each of these sort criteria, you define whether the system is to sort the transfer order items in ascending or descending order.
Before the actual dynamic TO split, you must sort the corresponding TO according to certain criteria. By sorting the TO items, you ensure that the TO split is sensibly executed and that no nonsensical TO splits occur.
b.     To define a TO split profile, choose Profile for Transfer Order Splitting.
c.     You assign your sort profile to the TO split profile by entering it in the field Sort profile.
2.     You determine when the TO split should take place in the Customizing for warehouse management under Activities  Transfers  Processing Performance Data/TO Split  Control for Performance Data Processing/Define TO Split.
You also assign a key to the TO split profile, consisting of a warehouse number, movement type, source storage type and destination storage type.
Features
Standard Sorting of TO Items
Control of the TO split occurs on the basis of the sort. The system defines the sequence of the items in the transfer order before the actual TO split via the sort, so that the sequence of the TO items corresponds to an optimal sort sequence for later processing.
Since the system always executes the forced split of the transfer order items according to the forced split criteria, the system always sorts the TO items in the standard sort in accordance with the forced split criteria in the order that the forced split criteria are processed.
Forced Split
Even if you have not set any user-defined criteria for the TO split, the system always executes a TO split according to the following forced split criteria:
     Planned data is required
The TO split first divides the TO items for which planned data creation is required, from the TO items for which planned data creation is not required.
The TO split also causes a further division for all TO items with planned data creation, according to the source storage type and destination storage area criteria.
     Per split profile
As soon as TO items differ from one another in the split profile to which they are assigned, a TO split occurs according to the split profile criterion.
     Per performance data profile
As soon as TO items differ from one another in the performance data profile to which they are assigned, a TO split occurs according to the performance data profile criterion.
     Per staging area
The TO split divides the TO items according to the staging zone to which they are assigned.
     According to mixed pallets
The TO split then separates the TO items containing mixed pallets from those containing no mixed pallets.
The TO split also creates a further division of all TO items with mixed pallets according to the storage unit that is to be moved.
     According to queue
The TO split divides the TO items according to the queue that these TO items are assigned to.
If you work with queues, you can assign each work area to its own printer. That way, all materials that are to be processed in a specific area can be combined in one list and printed on the assigned printer.
     According to handling unit items
The TO split then separates the TO items containing handling units from those containing no handling units.
     Separate confirmation of the withdrawal step and the transfer step is necessary
The TO split divides the TO items with split confirmation from TO items for which split confirmation is not planned.
The system transfers the information on the forced split to the header via the transfer orders, which are created as a result of the TO split.
The forced split criteria are obligatory. You cannot influence the forced split via the user exit. The system does not adopt any changes to the forced split criteria.
Dynamic Sorting
Before you can execute a dynamic TO split controlled via the Customizing settings, the TO items should be sorted according to the split criteria. In doing so, you ensure that the TO split is sensibly executed and that no nonsensical TO splits occur.
You can define the sequence of all the storage bins in the warehouse based on a specific sequence and sort the TO items according to this sequence. The system sorts according to the Sequence indicator in the warehouse master data.
Dynamic Split
You can define several criteria for the TO split in the Customizing for Warehouse Management.
     Split according to movement unit
On the basis of this split criterion, you create a new TO for each movement unit. In doing so, you create TOs with one item for exactly one movement unit.
You use this split, for example, during goods receipt when a whole pallet is moved from the GR area into the warehouse.
You define the split according to movement unit in the Customizing for Warehouse Management under Activities  Transfers  Processing Performance Data/TO Split  Define Profiles  Profile for performance data with the indicator Split single TO.
     Split according to picking area
You divide up the items to be picked according to the areas of responsibility of the picker.
     Split according to target times in the TO
You determine, for example, how long the picking for a transfer order is allowed to take.
     Split according to scope (weight or volume)
You determine the total weight or volume that a transfer order can cover for putaway or stock removal.
Note that the volume is calculated based on the alternative unit of measure. A box with 10 bottles, for example, can have a different volume than 10 times the volume of one bottle. If the volume for the alternative unit of measure has not been defined in the material master record, the system uses the volume from the base unit of measure for its calculation.
Activities
Note that you have no influence over the TO split according to forced split criteria.
You can, however, define your own criteria for a dynamic TO split via user exit MWMTO012. For more information, see the system documentation on this user exit

Is there a vi to manipulate a 2530 switch?

Similar Messages

Maybe you are looking for