Is there a Virtual keyboard for logging into online accounts securely?

Does OS X offer a Virtual keyboard for logging into online accounts safely and securely? (bank accounts and email accounts and other membership accounts)
If not, does anyone know of such a program designed for OS X?
Thank you.

That worked. Thank you.
System Prefs >
International button >
Input Menu Tab >
Choose "Show Input Menu in Menu Bar" checkbox >
Choose "Keyboard Viewer" checkbox >
Close System Prefs >
Chose "Show Keyboard Viewer" in Menu Bar of USA Flag

Similar Messages

TS2446 I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?

I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

I downloaded the latest update of firefox and now all I get is log into Xmarks. What is xmarks and there is no place to log into it?

I had a msg to update my foxfire, which I did, now when I go to open firefox a box pops up that says log into Xmarks. First there is no place to log into Xmarks and 2nd before I do I would like to know what it is. I can not get into Mozilla Firefox without doing this sp am now forced to use Internet explorer.

Hi,
[https://addons.mozilla.org/en-US/firefox/addon/xmarks-sync/?src=search Xmarks] is a bookmarks/history/tabs backup/sync utility. It is not a feature of Firefox. It is an extension which had to be manually added or perhaps could have come with another extension.
If you have registered with the service you have to enter the username and password to log in to the service. Otherwise try pressing the '''Esc''' key on the keyboard and after Firefox opens, go to '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click Extensions on the left and look for Xmarks and '''Disable''' to disable it or '''Remove''' to uninstall it. If that doesn't work, start Firefox in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] In the first screen choose '''Disable all add-ons''' and '''Make Changes and Restart''' and repeat the above procedure, but this time, re-enable all the needed extensions except Xmarks. You may also have to re-enable the plugins after clicking '''Plugins''' on the left).
[https://support.mozilla.org/en-US/kb/Uninstalling%20add-ons?s=add-ons+tab&r=3&e=sph&as=s Uninstalling Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

HT1727 my itunes account was on my home computer that me and my brother both used. The computer died and we will need to buy a new one. We thought that if we just logged into our account from my laptop all the music would be there, it is not. Can anyone h

My itunes aacount was on my home computer that me and my brother both used. The computer died and we will need to buy a new one. We thought that if we just logged into our account from my laptop all the music would be there, it's not. Can anyone help us?

Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

Setting privilege level for logging into ASA through ACS

Hi!,
In my environment i implemented AAA for logging into switches, routers, asa etc through ACS which is being configured TACACS+.
I have set different privilege levels like readonly, readwrite etc into ACS. There are working fine when i try to login into switch or router.
But in ASA i am unable to restrict the privilege levels of different users.
Can someone plz guide me with ASA & ACS setting to solve this issue!!!!!

Hi!!
I tried this option. It is working fine with routers & switches. But for ASA privilege access it is not functioning.
I created 3 profiles in "Shared Profiles" & added 1 of them in Group setting & added users to this group with mentioning group authentication. This way i am able to control access to the switches & routers with proper privilege. But the same way when i tried to impolement ASA it's not happening.
Can u plz check it out...

Well, I created a new Apple ID and I put money on it, I wanted to sign into ICloud and it wouldn't let me sign in due to the usage of too many Apple IDs created. The point for logging into the ICloud was to save my photos before I reset my phone.

Well, I created a new Apple ID and I put money on it, I wanted to sign into ICloud and it wouldn't let me sign in due to making too many Apple IDs created. The point for logging into the ICloud was to save my photos before I reset my phone. Is there any way I could fix this? I also want to transfer my money because I think it's a waste to just forget about the $13.75 on my account. Thanks.

I recently created a new apple ID
Bad idea.
Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content.

HT5312 I've seen where I can go to my id and click on password and security after logging into my account and should be able to reset my questions, but I do not see a button or section on this tab that says to reset my questions. What else is there to do?

I've seen an answer to the question of resetting the security questions is by logging into the account and click on security tab and there you should be able to reset the questions, but I don't see this option.what else can I do to reset my questions?

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact

My mac just turned off and wont turn on, i have another laptop, I was working on editing a photo shoot in lightroom. Is there a way I can log into my lightroom from another computer to access my catalog?

My macbook just turned off and will not turn back on. I have another laptop, I was editing a photoshoot, and I needed to access those photos. Is there anyway to log into my lightroom account from another laptop, so that I can access those?

Unfortunately, your Lr catalogue is stored on the original Mac, so just logging into your account would not work. As a Windows user in your situation, and if the need for speed was essential, I would remove the hard drive from the malfunctioning PCI and connect it to a working example and try to access the catalogue from an installation of Lr on that one. Is that at all possible with your Mac setup?
Edit: do you have separate backups of your catalogue, in the cloud for instance, but can the catalogue held there be installed on a different Mac? I 've no idea if this is possible, but if you're a professional facing a deadline etc, it might be worthwhile investigating this possibility if it's impossible to move the hard drive as I suggested above.

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

You can update your AppleID info here: Manage your Apple ID
Also check this page for more details about iTunes: Apple - Support - iTunes

Firefox Sync: I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

reading through that, it doesn't look like you were given up on Candice. you never replied to StarDeb's last set of questions in that thread. she was probably waiting to hear back from you.
why didn't you reply?

HT1918 when attempting to log into my account on itunes it ask for my password! I put my password in then I get the prompt again asking for my apple password! I put it in again and it still won't take!! What can be going on? I'm trying on my Mac pro !! Ev

when attempting to log into my account on itunes it ask for my password! I put my password in then I get the prompt again asking for my apple password! I put it in again and it still won't take!! What can be going on? I'm trying on my Mac pro !! Everything is up to date on the the latest Itunes version!!

Hello CarenzaRielle,
I know not being able to access your Apple ID can be frustrating. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Refer to the Apple ID Support page if you are unable to reset your password using the steps in this article. If you know your Apple ID password, you can also choose to change your Apple ID or change your password.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Structuring accounts for logging into servers (advice)

Hi All,
I have a domain with computers and users (standard setup). What I am wondering, how do you structure accounts that are for logging into the servers?
For example, I could create a group in AD with users and call this group "Local Admins", and add this group to all servers via GP.
Or I could use the Managed By attribute on AD?
What's the best approach?

Hi,
Based on my research, the “Manage by” tab is only informational, we still need to delegate control to the user/group so that it has appropriate access permissions on the object.
Here is related link below I suggest you refer to:
"Managed By"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/287526e4-c28c-4967-8a15-02b4d0f00807/managed-by?forum=winserverDS
Best Regards,
Amy Wang

Is there any way to reset the account or master passwords without logging into the account?

Dear All,
My desktop has locked me out.
It says that my account and master passwords are wrong.
Is there any way to reset these passowrds without logging into the account?
Thanks

Yes by booting the system from either the OS X install DVD or from the Recovery HD partition and using Terminal to bring up the Reset Password system.

What's the Default Password for Logging into huawei switches?

I was wondering if I bought the Huawei switches,
what’s the Default Password for Logging into them? so many people may have the same question that if bought a Huawei switch, what's the default password for logging into the switch? and maybe different kind of switches have different kind of passwords,
so maybe all of us wanna know them clearly.
Here, i'll tell you.
As for the bootrom default code:
Huawei S9300 V100R006 and the earlier version is 9300
Huawei S7700 V100R006 and the earlier version is huawei
And you can log into
http://www.huanetwork.com/blog/whats-the-default-password-for-logging-into-huawei-switches/ for more information, really useful.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Is there a Virtual keyboard for logging into online accounts securely?

Similar Messages

Maybe you are looking for