Is there a way for people to sign into a forum with the same email they used elsewhere on the site?

Right now, our site has to have a separate login for the forum that was built using the forum module. This poses a problem since users who sign up through other web forms that do not have username or password fields may try to sign in to the forum and then try to reset a password that does not exist. It also poses a problem in that people who are already in the CRM because they signed up using other web forms cannot use the same email address they used to sign up to register for the forum.
We have also had the same problem with secure zones in that people who have already gone through a web form and have their name and email address in the CRM have issues signing in to the secure zone.
So, I'm wondering if there is any way to fix this so that people can sign up using the same email address.
Thank you for your assistance!

lost mode don't depend of the sim card. If you take your Iphone on Lost mode... anybody can use it with the original card sim or with an other one.
Did you try to localise it ?
But hope that thief don't make a restore of the Iphone... Call your Mobile Operator to try to block the IMEI Number.

Similar Messages

  • Is there a way for me to have two Macs work with the same iTunes library?

    Hey all,
    I am replacing a G5 tower I have with a MacBook and I am of course going down in HD size. This means I will be using an external HD connected to a AirportExtreme BaseStation so all of my Macs can utilize it.
    I plan on putting my iTunes library on this external drive (roughly 90GB in size), and I would like to be able to rate/edit music from either of my two laptops; is this possible?
    If so, how would I go about doing that? And what, if anything, should I be mindful of? I don't want to lose my ratings or other info.
    Thanks in advance.

    Sure. Hold down the Option key when you open iTunes, and iTunes will allow you to select the iTunes Library file of your choice. So, you can select the same library file from both computers. The iTunes Library file can be on either computer or on the ext HD, next to your music folder.
    An iTunes Library file can only be accessed by one user at a time. That's the only limitation, though it may not be relevant to your intended use.
    iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB   Mac OS X (10.3.9)  

  • I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!!

    I lost my iPhone a few days ago and I put it on the lost mode. I don't want to give up looking for it. If a person stole it, is there a way for them to get into it or is it locked? I don't want to give up!!! But if there is a way that they could get in and take over my phone with a new number without me deactivating the iPhone and activating a different phone with my number.

    lost mode don't depend of the sim card. If you take your Iphone on Lost mode... anybody can use it with the original card sim or with an other one.
    Did you try to localise it ?
    But hope that thief don't make a restore of the Iphone... Call your Mobile Operator to try to block the IMEI Number.

  • Why can't I sign into my iMessage with the correct username and password?, Why can't I sign into my iMessage with the correct username and password?

    Why can't I sign into my iMessage with the correct username and password?, Why can't I sign into my iMessage with the correct username and password?

    Are you trying to sign in with App Store Apple ID or, another ID that isn't associated with your device?
    Have you tried contacting Apple Support?
    http://www.apple.com/support/ipodtouch/contact/

  • Can no longer sign into any forum with Safari?

    Hello,
    I'm using Safari 5.1.7 and have Mac OS X Version 10.6.8 installed.
    This happened about a week ago that whenever I try to sign into this forum, Facebook, any forum for that matter I cannot sign in. I enter my email and password and the fields are not accepted but just go blank and don't allow me access into this forum. Tried clearing cache and resetting Safari. No problems on Firefox which I always used for years and recently switched back to Safari but now back to Firefox.
    Any ideas, I will go ahead and try repairing permissions which I always forget about.
    Michelle

    Simple solution, ran Disk Utility which didn't fix the problem but went to Safari Preferences and then selected Privacy and it was on Block Cookies always and I switched it to Never and now have it on from third parties and advertisers.  Now it seems to be fine.  Phew.

  • Is there a way for multiple users to sync to iCloud  with only one administrator?

    Is there a way to have multiple users sync to an iCloud account with single administrator so the files cannot be changed on the cloud?  This would be for sales people to have the latest product shots without the ability to delete or change the albums in iPhoto.

    I don't believe so.  Every device that is signed into a shared iCloud account has the same privileges.

  • Is there a way for converting WCF service into Azure Cloud Service without dealing with project files.

    Here is my situation.
    We provide Platform and SDK to other people where they can build WCF services and deploy that on site. We have a  many ISVs who has built wcf services, packaged them and ship them.
    Packaging consist of couple of manifest file and .dll file that make up wcf service. Now we want to go on cloud with our platform.
    Long story short - I have all the dlls for my wcf service but no project file.
    Is there a way to generate cloud service package from this dll files?

    Hi,
    You can't simply package your dlls and deploy it as a azure cloud service deployment package - you will need to have your project as well as service definition file which will define your role and instances.
    You can read more about packaging an Application by Using the CSPack Command-Line Tool here -http://msdn.microsoft.com/en-us/library/azure/gg433133.aspx
    another way to go to cloud platform is by making use of azure web sites, however you will still need your service files do deploy.
    If you have the dlls and the service files with you - then you can simply use the web site publish wizard and deploy to azure web site.
    Read more about it here - http://azure.microsoft.com/en-us/documentation/articles/web-sites-deploy/
    Bhushan | Blog |
    LinkedIn | Twitter

  • Is there a way for network mounts NOT to open up with windows at startup?

    I have dragged several network volumes in the startup pane of my account in system preferences - so that when my computer starts up it automatically connects to various computers on the network and they mount on my desktop.
    However, each network volume opens a window, so after they have all mounted, I end up with 5 windows on my desktop.
    For a while now I've just been closing each window, but I want to know if there is a way for the network volumes to mount without new windows opening.
    I've tried checking the "hide" option in the startup pane and that didn't work.

    Thanks Niel, I don't know how to use applescript - so I have a few clarifying questions.
    1) I'm not sure what to write to specify the network volume name. So instead of "close every window", should I type, "close network volume 1 window, network volume 2 window, network volume 3 window" (substituting "network volume..." for the actual name)?
    2) Also for the delay, I assume the number 3 represent seconds - so does this mean if I type "delay 30" it will close all or specified windows after 30 seconds after startup? Would I put "delay 30" after "close every window"?
    Thanks in advance.

  • Is there a way for Labview to take control of a file that is already in use

    Is there a way in LabView to programatically take control of a file in use by another process?  I wish to write data to files that may be opened by another process, this data is time sensitive and acquired continuously so having my process wait until the file is available is not feasible.
    There should not be any other software accessing these files but sometimes windows is looking at them for some reason and I'm not sure how to make windows let go of them.  This does not accur often but it is annoying.

    Axehandler wrote:
    Is there a way to find out which program/service might be opening these files?
    Yes, use handle or process explorer from sysinternals. (see also).
    How is your labVIEW program structured? Could it be that your LabVIEW program itself holds on to the file from e.g. a previous file IO operation? Make sure references don't become invalid (e.g. via a "use default if unwired output tunnel) which would prevent the file from getting closed properly for example. Your program should open the file once at the start of the program and keep it open for the duration of the run. This way you should not have any intermittent problems accessing it.
    LabVIEW Champion . Do more with less code and in less time .

  • On the back button is the little drop down arrow completely gone, or is there a way I can I get it back. With the new Firefox I have to keep hitting back over and over again?

    Is the back button drop down arrow replaced by the little arrow next to the star on the bar?
    Maybe it didn't install correctly, I have Windows XP if that makes a difference. I know from the tour when the new one loaded there is supposed to be a bookmarks thing next to the new location for home but it's not on there either. It's still on my toolbar so I don't care enough to fix it so there is no need for anyone to address it, I just put the info in case it tells you something about it not installing properly.
    Sorry, it's not easy for older people to keep up with all the daily website changes, adding browser changes adds to the confusion. I hope my head doesn't explode one day. Thank you for the help.

    You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
    If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

  • I there a way to send a video in a text with the new ios 5.0 from the video folder?

    I just upgraded to ios 5.0 on iphone 4s and videos are now in a new folder. Is there any way to text or email these videos from the folder?

    There is no "out of box" tool per se that does this type of task, but you could probably script it with an Action that uses JavaScript.  If you are not familiar with Acrobat JavaScript then you will need to find someone who is familiar with it to assist you in building it.

  • Is there a way for me to share my PDF's with others online?

    I'd like to be able to share a few of the PDF's I have uploaded to the Adobe cloud with my customers by sending them a link. Is that possible?

    Absolutely!
    Simply select the file(s) that you want to share, and click on Send.
    If you have a paid subscription to Adobe Send, you can send the links directly by selecting the Send Personalized Invitations option. Otherwise, select Create Anonymous Link and then click on the blue Create Link button.
    For more help, see: Acrobat.com Help | Using Adobe Send

  • TS4185 i signed into face time with an inactive email accidentally and i can't verify the email because I can't get into it. Is there anyway to restart the process with a different email address so that I can verify it and begin using it.

    I tried to start face time and it said that it would send an email to the address provided but i didn't realize that the email address there was an inactive one and now i cant use face time since i havent verified it yet. I was trying to see if there was a way to restart the process so that i can get  that email sent to the corrent email address that i actually use.

    If there is no other way around this, is there anyway to completely wipe the phone then??
    The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me).  But before I trade it in, I would like to make sure all my data is backed up on the device first.
    When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it.  Now since I can't use the screen I can't really do that.
    So how do I completely wipe the iPhone???
    Thanks!

  • Is there any way to compile FLA files into SWF files on the command line?

    I am using Adobe Flash CS4 Professional on Windows XP.  To facilitate automated nightly builds, I have been searching for a way to compile my SWF files from the FLA files under source control, but without luck.  The tools in the Flex SDK looked promising, but we do not use Flex.  Thanks!

    Seen these?

  • Someone stole my ipod is there a way i can find it or track it with the serial number

    my ipod touch got stolen, and i was wondering if there was a way to track it cause the police arnt doing any thing. i have the serial number.

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    Reporting a lost or stolen Apple product
    What-To-Do-When-Iphone-Is-Stolen
    Lost or Stolen iPhone? Here’s What to do.
    6 Ways to Track and Recover Your Lost/Stolen iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
    Find My iPhone
    Setup your iDevice on MobileMe
    OS X Lion- About Find My Mac
    How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Maybe you are looking for