Is there a way for Verizon to check the strength of the towers?

Over the past month, everyone in our office has experienced low to no reception, regardless of carrier. Nothing has changed in our building to cause this. It is happening to all phones, not one particular brand. If its not a tower problem, I don't know what else it could be. It causes batteries to drain more quickly also. Zip code is 28160.

The reception is better outdoors than indoors. There have not been any
changes to our building, which is only a one level building, or the
surrounding structures and areas. I use a Motorola Razr M. However,
others at my location use different phones, such as I-phone 4 and 5, Galaxy
S, etc. Some even have a different carrier like US Cellular. Which is why
I was wondering if it could be a tower issue. Thanks.
On Thu, Sep 4, 2014 at 1:15 PM, Verizon Wireless Customer Support <

Similar Messages

Is there a way for Itunes to compare your library to the music that is on the ipod?

I have recently moved all my music to my laptop as my ipod may break any day now because it is so old and I wanted to organise my library so I don't lose any thing. Over the past few years I have manually been adding music to my ipod because it meant i could have music on my desktop computer and my laptop, however on deciding to move it all to one place I have descovered I have more songs on my itunes than my ipod but I can't work out which ones they are. Is there any way Itunes can run a program to determine the differences between the music on the ipod and itunes? I would just sync the entire library however it would mean that if there are songs on my ipod that are not on my itunes they would be deleted. (I would go through my library manually to determine the differences however I have over 4500 songs so that would be a little difficult)

I have only synced a device on a single occasion in my life. Doesn't it say something about how many songs will transfer?
The laptop is supposed to be the master repository for everything on the iPod and they are designed to be in sync.
You can check the Dougscripts web site. There's all kinds of goodies there but I don't know if the extend to something like this. There's also third party software but again I don't know if it goes to that detail. People usually use it when they are trying to rescue content for a non-backed-up computer.

Is there any way for a basemap to be manipulated from the client side?

Hello,
Essentially, we have a basemap (+basemap A+) that contains boundary geography (i.e., county, tract, block boundaries) and we have a theme (+theme A+) that contains housing unit points.
The idea is that theme A will be a layer that the user will be able to switch on/off. We know how to do this, but the problem comes in where performance is concerned.
Previously, theme A was actually included in basemap A, and performance was not an issue, but the problem then was that the user was not able to turn that layer on/off.
Also I have done everything I know in terms of caching as well as using the mapviewer API
(e.g.,
test_theme.setClickable(false);
test_theme.enableInfoWindow(false);
test_theme.enableInfoTip(false);
test_theme.enableLabels(false);
test_theme.enableAutoWholeImage(true);
test_theme.setMinVisibleZoomLevel(5);),
but rendering the theme on the client side is still way too slow (even at zoom level 5).
So, my question boils down to this. Is there any way for a basemap to be manipulated by a user? I.e., Is there a way for a user to pass parameters to a basemap, essentially telling it which themes to turn on/off?
I know you can specify which zoom level the basemap's themes are visible, but again, we want the user to be able to have control of when a certain theme is shown or not.
Thank you for any help you can provide,
John
Edited by: user641525 on Mar 18, 2009 10:29 AM
Edited by: user641525 on Mar 18, 2009 10:30 AM

What you may try is to replicate your base map but take the point theme out of its definition. Then create a second tile layer for the new base map. You can add both tile layers to the client (but set only one of them to be visible). Then simply switch the tile layers' visibility on/off based on user turning on/off the point theme. The built-in Oracle Maps tutorial #22 (Multiple Base maps) has some sample code you might be able to re-use.
thanks
LJ

Is there a way to help Apple check rights clearances at the time of submission

I am in the final stages of producing three iBooks, have images, audio and video from various sources. I have the rights to reproduce them, signed contracts with all the copyright holders.
My question is, it would see that when the book is being vetted by Apple, they would see all of this conent from various souces and want to verify that I actually have the rights to the content. Is this something that could hold the approval process up? Is there a way to assist them in vetting the rights clerances, perhaps a form to submit that I am not aware of?
Is this something that happens during the upload preperation in producer?

CaptnKrunch wrote:
I was mostly wondering if checking for rights clerances was causing some of the delays people are talking about.
I think that's unlikely. If your book contains media for which you do not have rights, the copyright violation is made by you, not by Apple. The only requirement Apple places on you is to add an appropriate copyright notice to your book:
Publisher shall provide an appropriate copyright notice in the Content File, or as reasonably requested by Apple, which Apple shall display for each eBook.
So, there is no need for Apple to check the rights for each and every image in a book. (If they did that, it would take much longer for books to make it into the store than it does now, not to mention the cost of such an exercise.)
Michi.

Is there any way for play/stop to NOT apply to the metronome? [mainstage 2]

I have EXS24 samplers triggered by drum pads, but like to be able to set one pad to [Play/Stop] so I can stop the samples on the fly. (in case I make a mistake or something) Problem is, I want to send the metronome to my drummer (via a different output on my interface) but I DON'T want [Play/Stop] to stop the click. Is there any way to get better control of the metronome? Does anyone with mainstage 3 know if this is an option? Can I re-wire it with logic 9 and run a click out of logic? Can't seem to get mainstage and logic to work together... Just need my click to run independently.

What you may try is to replicate your base map but take the point theme out of its definition. Then create a second tile layer for the new base map. You can add both tile layers to the client (but set only one of them to be visible). Then simply switch the tile layers' visibility on/off based on user turning on/off the point theme. The built-in Oracle Maps tutorial #22 (Multiple Base maps) has some sample code you might be able to re-use.
thanks
LJ

Is there a way for Verizon to locate my iPhone5?

I can't find it anywhere and think that i may have been taken.

CajunRaven,
I'm sorry to here of the lose of your iPhone. You can log into icloud.com and locate via the find my iPhone application. I hope you're able to locate the device. If not, we would suggest that we suspend the line. We don't want anybody to use your services. Also, we can look into your insurance as well. Let us know if you still need any assistance!
TrevorC_VZW
Follow us on Twitter @VZWSupport

I live in Europe France can I only download movies from the French Itunes site or is there a way for me to get english movies from the USA

I live in Europe, France, I want to use apple TV, but people tell me that the english movies on the French Itunes are very limited, do I have a way to get more English movies downloaded from Itunes?

There have been three or four questions like this one today relating to the apple stores in various countries. You have to have an account, credit card and address in the country in which the store resides. So you need a US store account, credit card and address to use the US store.
Since I used to live in France, have been frustrated trying to buy books and music from the French app store.

Is there a way for me to open 2 emails at the same time?

I often want to refer to a previous email or work on more than one email at a time. Mail seems to only allow one email to be open on the desk top at a time. What am I over looking? Thanks for your help.

Thank you for your comment. I should have said email drafts, whether it be a response to an email I received or a new one I'm creating. If I've got one email draft open it doesn't seem like I can do anything else in mail but complete the draft. I'm not able to view other emails or have more than one draft open at a time. Thoughts?

Is there any way for my iphone 3g to detect again the BT device i previously opted to forget?

Could any one help me how can my iphone 3g detect again the BT device i previously opted to forget?

try the other option in wi-fi .. go to Settings >> Wi-fi >> under Choose a Network tap on "Other" .. type the name of your wi-fi router then tap on the "None" in Security... choose what type of encryption you're using (WPA/WEP etc) ..type in the security key ... then tap "Join""... let me know if its works for you...

I accidentally formatted my portable hard drive when setting it up for time machine. Is there any way for me to get back my lost files?

I have an external hard drive of the brand Western Digital.
Before I got my iMac I moved a lot of my important files from my PC to the hard drive and today I went on and connected it to my iMac to move my files over to it.
When it had connected a window popped up that asked if I wanted to use this hard drive with the program Time Machine and create backups. Without thinking it trough enough and reading the warning properly (I'm stupid I know) I clicked "yes". I then realised how stupid it was and cancelled the formatting of the hard drive. But somehow the program still managed to delete all my important files and can't find any way to get them back. Neither can I connect the hard drive to my PC anymore so I can't check if the files are still there (which I doubt they are since I can't see them on my iMac either).
And now I wonder: is there any way for me to get back my lost files or are they lost forever?
Thank you in advance!
//Gina

A data recovery specialist or some data recovery programs should be able to help. Most format simply rewrite the directory tree saying no files are on this disk. The bits that represent the files are still flipped appropreiately so they still exists, you just don't have the location info to get at them. Secure formats and erases rewrite each bit to a zero or 1 or random so the data is then truely gone. This type of format takes a long time to complete.
I'm not making a recomendation of a particular program but here is one company that does what you ask:
http://www.remosoftware.com/mac-recovery The cost is pretty high but I'm sure they don't sell many copies and need to cover their development costs.
Good luck and don't write anything on the freshly formatted disk until you decide what to do.

Is there a way for managers to approve a form in FormsCentral?

I want to create an online purchase order form. Our school board policy requires that a purchase order be approved by both the department manager and Director of Finance. Is there a way for managers to clear the form for approval through FormsCentral? If a PO is held up, I want to be able to tell if the manager or Finance Director has seen it yet. Thanks.

Hi,
Sorry, FormsCentral currently does not support form-approval workflow. Please check Adobe Acrobat product, or the Adobe LiveCycle product
Acrobat forum: http://forums.adobe.com/community/acrobat
LiveCycle forum: http://forums.adobe.com/community/livecycle
Thanks,
Lucia

I recently gave my old iPhone to my nephew, he switched it to his phone account, but somehow I now have his contacts on my new iPhone 5. When I look at my iCloud account, it lists his contacts. Is there any way for me to get my contacts back?

I recently gave my old iPhone to my nephew, I did not clear out my old phone before I gave it to him, when he transferred to his account, he had my iCloud info on the phone, and it updated the contacts on my new iPhone 5 to his contacts. Is there any way for me to get my contacts back?

This is caused by using the same iCloud account on both phones. When you do this any data you sync with the shared iCloud account such as contacts is merged and will appear on all devices connected to the account. To fix this you both need to have separate iCloud accounts (you can continue to share the same Apple ID for purchasing from the iTunes and app stores).
Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (i.e., deleting your nephew's data from your account, and vice versa).
As for recovering your lost contacts, if they aren't on icloud.com when you check from your computer, you will have to recover them from a backup source. You could try restoring to your last backup but this doesn't always work for contacts. (Chances are you nephew deleted your contacts from his phone, not realizing it would also delete them from yours.)

I have always heard that Macs are less likely to get infected with a virus. My computer has been running much slower since I installed Maverick. Just not sure what the problem might be. Is there a way for me to run a diagnosis?

I have always heard that Macs are less likely to get infected with a virus. My computer has been running much slower since I installed Maverick. Just not sure what the problem might be. Is there a way for me to run a diagnosis?

Some have found relief just by reinstalling, but it is more than likely incompatible third-party applications that slow it down.
You will have to investigate to see what it is.
Open Activity Monitor and see if anything is using a lot of CPU% or Memory. If they are, check to see if there is an update for them.
Another place to look is the Console. See if anything is logging repeating messages with throttling and/or respawn in the All Messages list.
Sometimes it is not that easy to root out the problems, but if you have anything that purported to clean, protect, optimize, maintain, or flush your system, then that is likely the cause.

Is there a way for my macbook air (running Lion) to access an external hard drive on my Imac (running snow leopard) specifically for Iphoto and itunes?

Is there a way for my macbook air (running Lion 10.7.2) to access an external hard drive on my Imac (running snow leopard 10.6.8) specifically for Iphoto and itunes?

Yes. For those two applications specifically there is sharing. This presumes both computers are on and connected to the same network.
In iPhoto, enable sharing by (on the iMac) going to the iPhoto menu > Preferences > Sharing > check Share my photos. You can either share the entire library or only selected albums. Now on your MacBook Air, in iPhoto, go to the same preference pane and select Look for shared photos.
iTunes has something similar. In the iTunes menu > Preferences > Sharing > check Share my library on my local network. On the other computer, look in the left column for SHARED and select the iMac. You can now play that music on the MacBook Air.
There are other ways to share files but for those two applications this is the simplest way.
Best of luck.

A friend gifted me a copy of The Amazing Spider-man, I redeemed the code, now it tells me I can't download it onto my Ipad (1st Gen) because it does not have a gyroscope. Is there a way for my friend to get his money back, or a way for me to download it?

A friend gifted me a copy of The Amazing Spider-man, I redeemed the code, now it tells me I can't download it onto my Ipad (1st Gen) because it does not have a gyroscope. Is there a way for my friend to get his money back, or a way for me to download it?
As a second option I can play on my 1st gen Ipod Touch. Does that have a gyroscope?

Contact iTunes Store support staff through the report a problem links in your account history or,
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store - Apple states all sales are final, but you can always ask nicely. Your friend should have checked the specifications of your ipad before making the gift.

Is there a way for Verizon to check the strength of the towers?

Similar Messages

Maybe you are looking for