Is there a way of getting files created in iWeb09 from my iDisk into iWeb11 on my MacBook

When my MacBook was repaired Apple updated OS X and iLife. I had 2 web sites created in iWeb09 and published on my MobileMe account. They are still accessible on the net but are not visible in iWeb11. How can I download the files into iWeb11 for editing and publishing?

You didn't have a backup of your MacBook's hard drive when it had to be replaced? If you do look in your Home/Library/Application Support/iWeb folder to see if the Doman.sites2 file is there. If it is drag it to the same folder on your new hard drive and open with iWeb. That should give you your old sites back.
If you don't have a backup then you'll have to do what QTKirt pointed out. However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site.
OT

Similar Messages

My mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?

Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.

Is there any way to get all my stuff transfered from my old broken iphone to a new one

is there any way to get all my stuff transfered from my old broken iphone to a new one

Guess you have your answer. Maybe next time you'll read the User Guide and use the phone as recommended so this doesn't happen again.

I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)

I have an 11" MacBook Air. When I plug in my VGA adapter to my Thunderbolt port, the computer doesn't recognize it ... unless I reboot the computer. Is there another way to get the computer to recognize the adapter? (It works with my MacBook Pro)

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

Is there any way to get 720x576 (ie DV Pal) from iphoto slideshow?

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow? I want to export 200+ photos with random transitions and the ken burns effect. Imovie offers offers automatic ken burns effect via project properties but I can't find a way to add random transitions automaticcally. Is it possible? I want to add the exported file to a movie in Final Cut Studio. Normally I have to resort to using adobe photoshop elements 5 and premiere elements 3 on my bootcamp partition. I would love to do this all in Mac OSX - since leaving Windows, this is the only thing that forces me to use that lousy operating system!
Thanks in advance for any help.

I have tried the iphoto forum and have been directed here. Is there any way to get 720x576 (ie DV Pal) for an export from iphoto slideshow?
Not directly. But you can do it with a bit of external help. Create a slideshow project in iPhoto using the "Random" transitions and auto KBE you want. Then export the slideshow as a 640x480 MPEG4/AAC 30 fps full motion MOV file. Drop the file to MPEG Steamclip and select the "Export to DV" File menu option. The select the DV format, PAL standard, and aspect you want. (I would normally select the "Frame Blending" option in the main menu when going from 30 fps to 25 fps.)

Is there any way to download files on my computer from different websites i have created?

don´t know what happened but by any reason i cannot find my folders that contain all the files of different websites i have created, in my computers. So my question is if is there any way i can download those files from the business catalyst into my desk again

Thanks for replying my email. Well, I guess i was looking a way to get back all the files that I created to make different websites. Don´t know what happened but suddenly they disappeared from my desktop, i have been looking at them using different alternatives but I haven´t had any success, so that is why I thought maybe there was a chance to get them from BC. I am a designer, so I don´t know so much about technical issues. Thanks anyway.
Erbling

Is there any way to make files created from xml plugin (Incat) to ignore the plugin

I originally created my catalog files using CatalogStudio database which then created the files via xml. We had so many files become corrupt in the CatalogStudio database that we decided to quit using it and just create our files directly into Indesign. Unfortunately when we reset our system to operate on the original settings we deleted the old CatalogStudio software. Now when we open the Indesign files they look for the Incat plugin. We can still open them but now functions such as page numbering won't work. Does anyone know a way of getting around this problem?

I tried to mark your answer as correct because it worked. I hesitated to contact the company which had set up the xml application because we had ended our relationship but I, on your advice, I did anyway. They were very nice, sent me the plugins with instructions how to install and it fixed everything. Unfortunately, when I tried to mark your answer no selections were available to me.
Thanks though,
Danni

Is there a way to get files off my player without having the Creative Softwa

I'm on the work PC and I cant download the drivers i need but i really need some tracks from my player, is there a way to move them on to my PC HDD?
Thanks,
Dave

Which player do you have, and what is the Operating System on your (work) PC?
Cat

I am worried that someone has hacked my webcam on my iPad is that possible? And if so is there a way to get rid of it without having to go into the store?

IS there a way to hack into someone iPad webcamera? and if there is can you get rid of it by yourself and not have to go into the store? Thank you sooo much!

Unless you have jailbroken your iPad, no one has hacked into it. If that isn't enough to allay your fears, put a piece of masking tape over it. There is no way to get rid of the camera, even if you take it to the Apple Store.
Best of luck.

Is there any way to get games for iPod Nano from apple?

I got an iPod Nano fourth generation but I cant find games for it anymore, is there any way I can still get a game for it?

Clickwheel games (which worked on the 4G Nano) were removed from the iTunes Store last October and they will likely not be coming back. Sorry.
B-rock

Is there a way to get rid of Music Videos from playing in iPod?

I have over 51 music videos on my iPad, and I really wish they wouldn't play when I shuffle my music. Is there a way to make them stop shuffling - without getting rid of them?

By reading the iPad Users Guide there should be two ways. One is to, on your computer, move the Music Videos to the movies part of your library. The other way is to make a play list that excludes the Music Video and only shuffle that playlist. Regarding the latter, the USers Guide says:
Shuffle the tracks in any playlist, album, or other
list of songs
From the Now Playing screen, tap the album art
to show the song controls onscreen. Tap (this is an icon that looks like a black background with three horizontal black lines) at the
bottom of the screen, then tap Shuffle at the
top of the list of songs.
Whether or not iPad is set to shuffle, if you tap
Shuffle at the top of a list of songs, iPad plays the
songs from that list in random order.

Is there a way to get music onto my ipod from a CD that I lost after I put the songs onto iTunes, but then had to completely erase everyting on my computer?

Yeah, so this is what happened. I had an old iPod nano, and then my computer crashed and deleted eveything. Then, I got a new iPod, and I want to put songs that I had on a CD that I already had on iTunes before my computer crashed onto my new iPod, but I lost the CD. Is there a way for me to find those songs??? Kinda impossible, but is there genius out there that can help me out? Thanks.

The songs will only be where you put them.
It has always been very basic to always maintain a backup copy of your computer. Your music should be there.

Is there a way to get my bookmarks in Safari on my iPhone into Firefox Home?

i browse around in Safari on my iPhone, and bookmark things.
is there a way to export / sync / transfer these bookmarks i made in Safari on my iPhone into Firefox Home on my iPhone?
or into Firefox on my Mac (because then it would just sync with my iPhone Firefox Home)?

Hi teethandbones,
There may be a simpler way to do it, but I know you can set your iPhone/iPad to syncronize bookmarks with Safari on your Mac. You could do that first and then import the bookmarks from Safari into Firefox.
Just a thought!

HT4864 Is there any way to get my photos and videos from my old android phone to my iCloud? I'm going to but an iPhone in two weeks and desperately need to download all the info I already have... Please help!!

Is there any way that I would be able to download my pictures and videos from my old android to my iCloud?? I'm desperate to make this happen. It is the pics of my baby girl. I have just received the iPhone so I hope to never have this problem again but I need a solution currently.... Thanks!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

2004 eMac won't start in 10.3.9, is there a way to get 10.5 onto it from DL DVD-R?

Hi folks.
I'm trying to set up this ancient eMac for my mom. It had been running 10.3 or something, but I seem tyo recall it being wierd in that I couldn't get Safari (of all things) to run on it. So the other day, I put it in target disk mode and used a firewire cable and an old iBook to erase the HD and reinstall 10.3 onto it, as well as run the 10.3.9 updater.
It won't start up. It stalls at the apple logo.
So I figured that since it's RAM is maxed I'd put 10.5 onto it. I OWN 10.5 but I cannot for the life of me find it. My only copy of 10.5 is a DVD-R I bought on Craigslist from a guy who represented it as a genuine retail copy (I disputed the transaction through Paypal and was baffled that they decided in his favor). Anyway, this eMac cannot read DL DVDs. I have an external optical drive that can, but the eMac will not start up from it.
I tried to install it from my macbook pro with the emac in target disk mode but the installer won't let me because it assumes the volume 10.5 is going onto is attached to an intel processor.
I know there's some trick. Can anyone help?
Thanks!

I cannot find the eMac install disk, and I haven't been able to get it to start up from my 10.3 CDRm (holding down option or c), though I read something somewhere about these not being able to start up from system folders earlier than those they shipped with. I've dealt with this sort of thing several times before, and it always seemed to work to simply use target disk mode.
It definitely won't start up fromt the 10.5 DVD-R, and I'm pretty sure I tried putting the MBP into TM to use its optical drive as well, but it didn't work. But it's worth trying again, and I appreciate your input greatly.

Is there a way of getting files created in iWeb09 from my iDisk into iWeb11 on my MacBook

Similar Messages

Maybe you are looking for