Is there a way of getting Firefox to automaticly import the Explorer settings upon install?

Hi!
I'm trying to repack Firefox 3.6.3 into a MSI for a deployment install trough-out our organization. Since we're using Explorer as the default browser at the moment our users have all their bookmarks and such stored in Explorer. Now I'm wondering..
Is there a way of getting Firefox to automaticly import the Explorer settings upon install?
-Without having the wizard popup.
I also don't want Firefox to be the default browser since the users have to decide for them self. But atleast they have there bookmarks / defaultpage and proxy settings if they decide to go for Firefox.
Regards
//MSI-Packager
== This happened ==
Every time Firefox opened
== Firefox is installed ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5

I'm not sure if you have the capability, but did you try copying from your premiere sequence and then pasting into your after fx timeline? i was working with a MUCH shorter video with a mix of merged clips (interview footage) and video clips (b-roll). the video clips imported, but the merged clips did not. i put the timeline cursor to the right point in the after fx timeline, copied the premiere clip from the sequence, pasted it into after fx.

Similar Messages

  • Federal court website gives a .pl document which opens as garbage until we manually change it to .pdf, is there any way to get Firefox to do this automatically?

    I am using a Mac. When downloading a document from the federal court website using Firefox, we get a .pl document which opens as garbage (in TextEdit) until we manually change it to .pdf, which causes it to open just fine (in Preview). It used to work fine, giving a .pdf document every time, but apparently upgrades to Firefox have removed this functionality. As far as I can tell my computer, an iMac running Mac system OS X 10.10.1, does not recognize the .pl format. Is there any way to get Firefox to automatically convert a downloaded file from .pl format to .pdf format? My friend tells me that Google Chrome downloads these documents with no problem. I would prefer to stick with Firefox but I might have to change if every downloaded document is in an unreadable format.
    This is a typical example of what I get when I try to open a .pl document (the pdf version is a one page document using plain English):
    =====
    %PDF-1.5
    %‚„œ”
    2 0 obj
    <</Length1 15628/Length 10121/Filter/FlateDecode>>stream
    xúÌ{i`U∂9∑™∫;kWoYÈtuöK“ÑR@“ F!,Å$ñêÑÑd Ç䆆¢≤)
    ¢Ääƒet\FeûN࣌∆y3"ÈÔ‹Í|Ûæ˜˝˙˛LUNü{œ›Œ=€=∑i

    HI jlawrence1,
    Is it possible to associated the pl file mimetype with an application? [[Applications panel - Set how Firefox handles different types of files]]

  • Is there a way of putting firefox bookmarks folder on the dock

    Is there a way of putting firefox bookmarks folder on the dock. not just one bookmark. i have done that. but i want all of them in stack or something.. similar to how windows did it in the start menu. its annoying that you have to open firefox first to access your links.
    i got my first imac yesterday and loving it!!! albeit the text is a bit small but i have found the zoom!
    thanks in advance

    Perhaps you don't know how to bring icons into the Firefox  Toolbar. You can put many things up there, including Bookmarks. You can also remove an icon or rearrange the order of icons.
    From View>Toolbars>Customize
    Here is the Bookmarks icon (next to the History icon) from which you can open all your bookmarks directly. And if you can remember a keyword, it will find that one, or any others that come up with that keyword. It's really quite convenient to use and will stay updated with any new bookmarks that are added.
    This is showing the Bookmarks open, which can be closed by clickng on the small x.

  • Is there a way to get multiple email accounts on the front page of my Iphone?  Also I would like to have different sounds when I receive mail in the different accounts. Is this possible?

    Is there a way to get multiple email accounts on the front page of my iphone instead of just the generic mail icon?  Also is there a way to get a different alert sound for each email?

    No.
    You need to review this (WYSISWG):
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • Is there a way to get my iDVD Menu to the beginning of my movie on the DVD?

    Is there a way to get my iDVD Menu to the beginning of my movie on the DVD?

    Go into the Map mode and make sure there are no items in the far left hand bin.
    If there is something in that bin drag it out, save it as a disk image via the File ➙ Save as Disk Image menu option.  This will separate the encoding process from the burn process.  To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good and you can then burn to disk with Disk Utility at the slowest speed available to assure the best burn quality.  Always use top quality media:  Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Is there any way to get Mini Bridge to show the color labels that are set in Bridge and/or Lightroom

    Is there any way to get Mini Bridge to show the color labels that are set in Bridge and/or Lightroom?
    I am using Cloud InDesign CS6 on Windows 7.

    You will need to go via your computer's iTunes - to get music into the Music app you either need to download it directly on the iPad from the iTunes store app, or sync it from your computer's iTunes

  • HT201364 i have all the requirements except 8gb of available space. my mac only has 4gb capacity.is there any way to get a smaller version of the mavericks software?

    I have all the requirements except8gb of available space. my mac only has 4gb capacity.is there any way to get a smaller version of the mavericks software?

    That refers to free disk space, not RAM. If your computer has 4GB of RAM, that's enough. If it only has 4GB of free disk space, you need to delete content from the internal drive; for best results, free up at least 20GB.
    (97356)

  • Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

    Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker

    Thanks for the reply however this does not help.  When I check the cloud it shows that I have only 20 photos.  In reality I had a lot more than that.  All the photos on the cloud are those that I have taken since I was at the Apple store.  When I check cloud storage usage on my phone it says that I have 5.1 GB of photos.  This is a lot more than the 20 that I can see.  I am not sure what the Apple employee did to my phone.
    Still looking for answers.  It is really too bad that I can not talk to an Apple person to get help since they messed up my phone.

  • Is there a way to prevent iTunes from automatically starting the next playlist file on the iPad?

    Is there a way to prevent iTunes from automatically starting the next playlist file on the iPad?

    When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

  • Is there a way to get firefox to warn me when exiting with multiple windows open?

    When I click File > Exit in the menu, I want firefox to warn me if I have multiple windows open.
    I don't want it to warn me about multiple tabs though.
    Is there a way to get it to do that?
    I would prefer to just hit the red X in the top right corner, which would avoid this problem, However, if it is the only firefox window I have open, then the red X will often not properly shut down firefox exe, so next time I try to launch firefox it won't work and I have to end task on firefox exe! I was told to use File Exit to improve the chances that firefox will properly close, but doing so introduces this new issue.
    thanks

    That doesn't work.
    Once I set it to true, if I have one window open with multiple tabs, and try to exit, it comes up with a warning box, which I don't want.
    Then if I check it to say 'don't show this again', the next time I run firefox the showQuitwarning setting has been set back to false. So then when I have multiple windows open and I file exit, all firefox shuts down with no warning.
    The reason I want this is because I can *see* the tabs of the window I am in when I am clicking on file|exit, so visually, I'm not going to close anything that I didn't mean to close because it's right there visible to me at the top of the screen (the tabs are seen at the top of the screen) in the same area as where I am looking at and clicking File Exit.
    But other firefox windows are not visible up there so it is easy to forget that they are open, since a lot of times I don't have any other windows open (if I *always* had other windows open then I would not forget them and be in more of a practice of checking the taskbar for them)
    And this is all because I can't hit the red X in the top right corner without increasing the odds of hung firefox processes that don't truly exit (thus making me unable to start another session later without Ending Task which isn't good).
    The hanging is daily but random and not reproducible, so it's very difficult to troubleshoot or fix.

  • Is there a way to get Firefox to open a link on a webpage by hovering over it

    I often browse websites and find that I often spend time clicking on links to open and go to them
    Is there a way to configure Firefox to open by hovering over the link?

    I want it to open without having to click on the icon. I would like it to open by itself when the computer is turned on.

  • Is there a way to get ACR to appear in the "Open With" drop down menu?

    Hi,
    Is there a way to get Adobe Camera Raw to appear directly along with CS3 in the Mac's ( OS 10.4.11) "Open With" drop down menu?

    If you installed ACR it in the right place, and are targeting the kind of file that ACR can handle, it should be there.
    I have found that there are certain Tiff Scans that won't open in ACR but if you just Duplicate them in Bridge, and then target the Duplicate, they will then open in ACR.
    At least they do so for me.

  • I was burning an audio book and on the last of six CDs, the CD i entered had a problem. Itunes quit without burning the last CD. Is there any way to get it to burn just the last CD or do I have to re-burn all of them?

    I was burning an audo book to CD. It was six CDs long. After the fitth CD I inserted one that was defective and itunes just ended, as though
    the burning had been completed. Now I have five of the six CDs.
    1) Why did it do this instead of telling me I had a bad disk or something?
    2) Is there any way to get it to re-burn just the last disk instead of having to re-burn all of them?

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • Is there a way to get data to and from the hard drive of a Powerbook 180 without having to use the floppy drive?

    Howdy folks!
    I have an 20 year old Powerbook 180 with what I think is an unreliable floppy drive. Sometimes while accessing a diskette the screen flickers and usually power to the whole computer drops out.
    I'm not familiar with Mac connectivity. Is there a way to access the hard drive--to get data off of, and install files, etc onto, the hard drive? 3.5 inch drives are 20th century.
    But... I am happy because my old Powerbook still boots up just fine and I can look at my old files installed on the HD ok.
    Thanks,
    Hayward Matt

    Hi Hayward,
    This may be a power supply issue, not necessarily a problem with the floppy drive itself. Any change if you try removing the battery?
    Would it be correct to assume that it is a plain PowerBook 180 (not 180c)? Which power adapter are you using? It must have a 7.5 DC output, but is it capable of supplying at least 2.0 A?
    Unfortunately it is difficult to remove and connect the (2.5" SCSI) hard drive to a modern computer. Had it been 2.5" IDE, things would have been much easier.
    It is possible to set up a serial null-modem connection from a PowerBook 180 to another computer. See the following discussion for details:
    https://discussions.apple.com/thread/4974860
    If the PB 180 has an internal modem (or an external modem connected to the modem port), you could send files to another modem-equipped computer over the phone lines. With the proper software installed, the PB 180 can even use a dial-up Internet connection.
    Alternatively, another semi-old (pre-1998) Macintosh computer with built-in Ethernet could be used as an intermediary, You could use LocalTalk (or a plain Mac printer cable) for file sharing between the PB 180 and the semi-old Mac (the latter could then forward files over a local network or via the Internet). It is also possible to connect the PB 180 to the semi-old Mac in SCSI disk mode (see the user guide below for additional information).
    manuals.info.apple.com/en_US/0302674APB160180UG.pdf
    Jan

  • Hey guys I got a used iBook from a family friend who had it password protected and he doesn't remember the password.Is there a way to get around this without wiping the computer?I don't have any of software discs and can't update or delete anything.Thanx

    Hey guys I got a used iBook from a family friend that has it password protected.I can't update or delete programs or download anything without the passwords and he doesn't remember them.Is there any way for me to get around these without wiping the computer and starting from scratch?

    Hello,
    Sadly without the system disk you can't do a lot. I would suggest you enable root user, log in as root and reset your administrators password, however you can't without knowing the administrator password first.
    The only solution would be is to obtain the correct system disk or buy a retail copy of Mac OS X. But note, it depends on what version of the iBook you own depends, on what version of Mac OS X you will require.
    You can still obtain the system disk or retail disks from online vendors, but they come at a cost.
    System disk are grey in color, while retail disk have a big 'X' on it.
    Best of luck

Maybe you are looking for

  • How do you FORCE FCPx to re-render a clip?

    here's the problem. Final Cut Pro X FREQUENTLY screws up transition renders. Did I say FREQUENTLY? It CANNOT be stressed enough, that FCPx DOES SOMETHING BAD to its transition renders Quite Often. ok, until Apple fixes that nightmare, I want a workar

  • DB2 DIGIT  FUNCTION IN ORACLE

    What is the DB2 DIGIT FUNCTION equivalent in ORACLE database. We have done a migration from db2 to oracle and many programs just fails where I encounters digit function. Is there any workaroud or function present in oracle database which makes the pr

  • Adding network printers in Lion

    Is there such a thing on the Mac OS 10.x system as adding a local printer using a TCP/IP port, where you can specify the printer's IP address as you would in WIndows?  If so, is it explained somewhere how to do that? Marty

  • Changing alias with Bulk Admin Tool - Unity 9

    I have a Unity Connection 9 server that had been updated from Unity v5.  My users were all created with an arbitrary alias that does not match my active directory usernames. I would like to complete my AD integration by updating my existing users' al

  • Please be as specific as you can in the allotted space. For example, if you are giving feedback about slowness, please tell us about relevant websites, if you n

    I can't seem to get Firefox to remember my homepage. It starts where I left off every time i start Firefox. I have gone through every fix imaginable but no positive result. I have a new security system called "Total Defense Security". I've tried ever