Is there a way of knowing which external drive ejects?

Is there a way of knowing which external drive ejects?
I have several external drives and when one ejects on it's own it usually immediately restarts again and does not give me time to find which one was the problem drive.
Is there a way of figuring this out?
Thank you!

No unfortunately without restoring the library and running it there is no way to tell if it is good or not.
regards

Similar Messages

Lost my iphone dont know my IMEI number tried to get it from ituens about and clicking the Control key but there is one imei and i have 2 phones backed up on my ituens is there a way to know which one is the right one?

Lost my iphone dont know my IMEI number tried to get it from itunesby clicking about and the Control key but there is one imei and i have 2 phones backed up on my itunes is there a way to know which one is the right one? and is there another way to find my phone and its offline so i cant use find my phone! Help

Other ways? Check the box? Call your carrier?

On the 652X, is there a way to know which port/line caused the change detection w/o checking each individual line?

On the 652X, is there a way to know which port/line caused the change detection w/o checking each individual line? This question relates to creating an interrupt handler when there are many events that cause an interrupt.

No. Read the User Manual, CH4, Change Notification.

Is there any way to know which Apple ID was used to activat

My father activated my iPad mini about two years ago.
I recently restored it after updating it to iOS 8.0.2
After restoring, it is asking for the Apple ID that was used to activate the device.
Unfortunately my father can't remember the Apple ID he used to activate the iPad mini.
I was wondering if there was any way i can know which apple ID was used so i can access my iPad somehow.
Or if there is any other way possible to activate my device. PLEASE let me know.

Click here and use Apple's iForgot service, or if needed, contact their Account Security team.
If both methods fail and you or he is the original owner, take the device and its original purchase receipt to a physical Apple Store.
(114190)

Is there a way to know which Ethernet port will be used when running TCP Open?

Hello.
I have several Ethernet ports in my computer, and I am trying to write a VI that sends data from one port to the other (for debugging an issue). I was planning on using the TCP Open and other TCP VIs, but the TCP Open does not seem to have an input to tell it which local Ethernet port I want to use.
So, is it possible to specify which Ethernet port you want your TCP connection to be open on? How about UDP?
Thanks,
AlejandroZ

The TCP Open does have inputs for specifying both local and remote ports.
Message Edited by Dennis Knutson on 08-23-2007 09:52 AM
Attachments:
TCP Open.PNG ‏11 KB

Is there a way to connect an external drive to an iPad retina?

I'd like to connect my external hard drive straight to my iPad retina and just wondered if it can be done and if so how?

As James said, you can use something like the Seagate Wireless Plus. But underatand that the iPad does not have a user accessible file system like on a computer. To use this HDD, you must use Seagate's app and it is designed only for media like photos, videos, and music. It is not usable for documents and other files.

Fusion Drive: is there a way to know where data is?

I have just set a Fusion Drive in my iMac and I was wondering, out of curiosity: is there any way to know which drive data is stored on, at a given time? In other words, can I know if a file is stored on the SSD or on the HDD right now? Or can I know the current distribution of data on both drives?
Thanks for any reply!

No. In general, parts of a file might be distributed on both drives. This is not something you need to care about.

In I06, I have no way of knowing which songs are on my iphone 4s vs being stored in the cloud. There used to be a small cloud next to songs that were not downloaded. This was important to make sure I had the music I wanted when in an airplane.

In the new i06 that I just loaded into my 4s, I have no way of knowing which songs are on my iphone vs stored in the cloud. There used to be a small cloud next to songs that were not on the phone. This is an important piece of information if you are a frequent traveller, as most of the flights I am on don't have onboard wifi, so it becomes a crap shoot as to what I will have available to listen to.
Is there a way I can view what songs are actually stored locally?

Go to Settings > Music and set "show all music" to OFF.

I am thinking of buying a "new" iPad but I have a very large iPhoto library which I would like to keep intact and be able to view on my new iPad. Is there a way to use a external storage device to store the iPhoto library and view it on the iPad?

I am thinking of buying a "new" iPad but I have a very large iPhoto library which I would like to keep intact and be able to view on my new iPad. Is there a way to use a external storage device to store the iPhoto library and view it on the iPad?

You can't use an external hard drive like you would with a computer.
You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
When you first connect the USB flash drive, you will only see thumbnails of the pics on the iPad; you have to import the pic file to see the full size. With your large library of pics, you will have to do this repeateably and then delete pics so you don't exceed your memory capacity.
 Cheers, Tom

Bookmarks - Hate the firefox version. Double click on the site to bookmark and the book it too small. And when in the bookmark window on the right side of the screen there is no way to know which folder you are actually in. Help.

Bookmarks - Hate the firefox version. Double click on star in the address window to bookmark the site and the pop-up window is too small and user unfriendly. And when in the bookmark window and have bookmarks on the right side of the screen there is no way to know which folder on the left you are actually in. Is there any way to upgrade the bookmarks feature. So frustrating I might actually go back to IE because of this. Thanks.

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

My MacBook Air does not have an optical drive. I have a program (Megastar V) which is installed using a CD. Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
Otto

Thank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto

Is there a way to update an external dictionary for services without migrating the services

Is there a way to update an external dictionary for services without migrating the services
Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary. I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Is there a way to connect an external speaker (for another room) through the headphone port

Is there a way to connect an external speaker (for another room) through the headphone port & still hear sound through the internal speakers? System Preferences/Sound/Output or Sound Effects allows you to use one or the other -- headphones or internal speakers. I would like to have the option of hearing music through the internal speakers in one room, & through an external speaker in another room at the same time. I also do not want to frequently disconnect/reconnect the external speaker from/to the headphone port as I know over time the connection could become loose. (10.7.4 Lion)

dont think so but I could be wrong
as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers but there
are times when I use headset so I bought this one
or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

Is there a way to set which keychain item is used by default for a site/application?

This question applies primarily to the keychain in Mavericks, but also the iCloud keychain and its use in iOS.
There are several sites and services for which I have multiple logins that serve different purposes. Whether it's because they are business/personal accounts, or accounts that pertain to different functions, I have multiple logins for many sites/services I use daily, however, there is usually one primary account for each that I use for most purposes.
What I would like to be able to do is set which of these logins appears by default. An example scenario might be if I have an "admin" account on a site, and a "dev" account that is used for testing purposes to Q/A the site from the perspective of a user who doesn't have administrative access. Most of my work happens under "admin" but whenever I go to the login page, the "dev" account prepopulates in the login form and I have to start typing admin and select that. It also does this on my iPhone, which is where this issue becomes very cumbersome, because there is no dropdown for me to select which credentials to use to autofill from. It appears to only allow autofill from whatever it sees as the first account to come up, and I can't seem to change that without deleting all the other keychain items that come up ahead of the one that I want. This kind of thing also poses a significant risk of accidents if, say, I have multiple payment methods saved and the one that comes up by default isn't my personal payment method, but a business account that's only meant to be used for business purchases. If that comes up first, if I don't replace it with my personal details, I might accidentally place a personal charge on a business account.
So I really have 2 questions:
1) Is there a way to set the priority order of which account populates a form by default from the keychain?
2) When filling out credentials on iOS, an "autofill" button appears at the top of my keyboard, and I can begin typing in a field and it will show the autocomplete of the username that I am typing, but if I click autofill, it replaces it with the original credentials and not those of whatever I began typing in. If I click on the username it's autocompleting, it just clears the autocomplete. Is there some way to choose which username I'm autocompleting a form with?
Thanks to anyone who has any ideas about a solution to this, and if there isn't, and if anyone at Apple is listening, in an ideal world, it would be like setting the priority order of known wifi networks, where you can drag your first choice to the top of the list.

This sounds like the age old problem with keychain & Safari. I don't know of a way to solve it without using something like 1Password.
The iOS app has it's own built in browser, so it has more control over what gets autofilled. Safari on OS X has an 1Password extension that handles account selection & autofill etc.
Keychain is great in principle, but it quickly falls down when you need tight integration with many ID's & different use cases (work, home etc).
I'd suggest you submit feedback to Apple about your thoughts. I did so years ago about this issue & this is how far we have come (back to the point where me.com synced passwords) :^)
http://apple.com/feedback/macosx.html
Other tools like lastpass or keypassx may also help if you want to truly segregate password storage, but that doesn't fix autofill, the way around that issue is to dedicate one browser for work.

Is there a way of knowing which external drive ejects?

Similar Messages

Maybe you are looking for