Is there a way of printing the file name from within the Preview application?

If I'm printing a file within Apple's Preview application, I sometimes want to be able to print the file name at the edge of the document. Does anyone know of way of doing this?

Thanks for replying, that goes some way to answering the question, but I'm also looking to see how much space each app and its associated documents are using, i.e. Pages comes in at 112Mb for the app alone, but I'd like to know how much space is being used by the documents as well.
Once again thanks,
SG

Similar Messages

Is there any way to delete duplicate files en mas within the new itunes program?

I've just installed the new itunes program on my laptop. I used the scan for media option to find music. Problem is almost every entry and there's several hundred of them is duplicated and in some cases triplicated within the itunes media library.
Question ... Is there any way to delete duplicated files en mas withing the itunes library folder?
Please don't tell me that I'm going to have to do it individually as that may take days.
Thanks

Apple's official advice on duplicates is here... HT2905: How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning
to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
tt2

Getting the class name from within the compiled class file

hey!
I was wondering (i know its possible) how to read a .class and get the name of the class. ok that made not much sense^^ so, You have a file: c:\f.class but it wont run because the file name has to be the same as the classes name, right? so how can you read the class file i guess in binary mode to receive the correct class name.
I saw inside my f.class i have "realname.java" so i know now that the name of the class file should be realname.class, i tried ways to extract it from the class file but never had any success.
i think i need to study english^^
ps: i need this because i have some class files sent to me and the file names have been changed so they wont work, they only work when i open the class file in notepad and find out what its real name should be and then rename the file.
Edited by: forgotmydamnpass on May 7, 2009 11:23 AM

ah looks interesting, problem is i cant use it.. im prone to errors!
import java.net.URLClassLoader;
public class NewMain {
     * @param args the command line arguments
    public static void main(String[] args) {
        FileClassLoader loader = new FileClassLoader();
        Class clazz = loader.createclass("c:\\f.class");
        Method method = clazz.getName();
}apparently "createclass" doesnt exist :/
FileClassLoader = cannot find symbol
Method = cannot find symbol

Can I access the file name from within an action?

Hiya Y'all;
I have an action written that batch opens a bunch of files, resizes the canvas of the frontmost, pastes the rest in, &etc., resulting in a montage. I would love to be able to access the names of the files used to create the montage, paste them in from the clipboard using the text tool, and thus label each pic. I can access the same general functionality through the File>Automate>Contact Sheet II command, but I then have little control over how PS resizes the images, and since my file names are often >32 characters, Contact Sheet II truncates the names in a silly way.
I really would prefer not to have to use Applescript or Javascript, but I'm getting the feeling that I may have to. Is it possible to use AS to put the name in the clipboard, call the action from the script, and do that each time I paste in a new image? I can't do it once, since I will have six file names that each need to be pasted in . . .
Hope y'all have some advice,
R

Thanks everyone . . . I use Chris's solution, setting it up in an action that is called by Applescript. It works great, though it takes noticeably more time to run the script (I think it has to load and be interpreted each time).
I haven't tried Michael's suggestion, but, bottom line, you guys ROCK! It's amazing to have an obscure technical question answered in a day or so, and continuing interest from other good folk.
Thanks to you all!
Richard

Is there a way to control Adobe PDF plugin from within a Web Application? For Example, Can we highlight text in the PDF/A document programatically?

Hi,
I am trying to open a PDF document in browser using Adobe PDF plug-in for IE 9. The plugin version is 10.x
I need to highlight certain text in the PDF document ( which is searchable) programmatically. For example, when a user selects certain text on the web-page, we want to automatically highlight that in the PDF document.

I don't think this is a question one can answer by simply downloading the SDK. And even if one reads all the documentation (it rarely happens for obvious reasons), it is not easy to reach an answer because its explanation is not trivial at all.
In my own opinion, this is right the type of question to be put and (hopefully) answered in a Forum.
Now, I am not sure about the correct answer but I will give one hint.
If I am not wrong, the Internet Explorer, IE, PDF viewer by Adobe is actually a .dll file which is put under IE once Adobe Reader is installed. A custom plug-in for Reader or Acrobat is also a .dll file (Windows) but its extension is .api and it needs to be copied under Reader or Acrobat (or both). Therefore, I don't see how we can merge the IE viewer .dll with a custom plug-in .api. Though maybe technically possible, I don't think it is something we can do.
If above reasoning is correct, the answer to the question is No.

HT4407 Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

Is there any way to download these files manually from another source? The download from boot camp keeps stopping at around 25% and then produces the error "Can't download Windows Support Software because of a network problem". Thx!

No. This issue is dicussed here frequently. The only option is to be patient and try often. Search this forum for other posts about this issue.

HT4356 Is there a way to print a contact list from an iPhone?

Is there a way to print a contact list from an iPhone?

Another way to do this is to use Contact Sheet (https://itunes.apple.com/app/id894488957?mt=8) which can print your contacts and pictures or it can export them into an Excel file. You can print all of your contacts or just a select group that you choose. You can even share contacts and only include the fields you want, so, for example, if you want to share email addresses with a new mom's group but you don't want to share home addresses, you can create a contact share file (VCF) that only includes the names and email addresses of the members of your new mom's group!

Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

There are "container" apps emerging for the iPad. Enough searching & I suspect there would be one for your needs.
All in one Application that emphasize security
Good Collaboration Suite Secure mobile app-to-app collaboration.
The Good Collaboration Suite includes Good for Enterprise, Good Share and Good Connect secure mobile apps, simplifying access to email, calendar, contacts, tasks, instant messaging, browsing and document sharing. These apps are built using Good’s next-gen containerization that includes secure data sharing between any Good secured app as well as app-level encryption independent of the device used."
http://www1.good.com/applications/

When bates numbering a .pdf in XI, how can I change the file name to include the bates number AND its name? I know under file output, there is an option for either/or. I want both. Thank you.

when bates numbering a .pdf in XI, how can I change the file name to include the bates number and the file name? I know under "file output: it's either/or. I need both. Thanks!

Long ago I wrote a little demo using the touch command. Check out the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=25128#M25128
LabVIEW Champion . Do more with less code and in less time .

Retreiving the file names from directory inside another directory from application server

Hi,
I had a problem in retreiving the file names from a directory inside another directory.
I tried using the FM's SUBST_GET_FILE_LIST, RZL_READ_DIR_LOCAL and EPS_GET_DIRECTORY_LISTING
But here I am getting only one directory details.
Actually my file is located a directory inside one more directory and one more directory and inside the files are located.
i.e total 3 directories inside the 3rd one my files are there.
I need to read the latest file name in the directory.
So that i can do some manipulation after getting the file name.
Is there option like OPEN DATASET , READ DATASET and CLOSE DATASET?
Can anyone please let me know How can i acheive this one.
Regards
Ram

Hi Ram,
Following thread can be helpful for you, were it shows in the tables structure rsfillst a field RSFILLST-TYPE whether its a directory or file..........
http://scn.sap.com/thread/865272
thanks and regards,
narayan

How to fetch the Date column(or Month column) from the file name from the specified path in ODI 11g

Hi ALL,
Can any one help us regarding How to fecth the Date column(or month column) from the file name specified in the path in a generalized way .
For example :
file name is :subscribers (Cost) Sep13.csv is specified in the below path
E:\Accounting\documents\subscribers (Cost) Sep13.csv
here I need to fetch the "Sep13" as a Date column in the ODI 11g in the generalized way.
Can any one help us in this case as early as possible.

I would suggest using a piece of Jython code for this. Something like this...
import os
import os.path
filelist = os.listdir(E:\Accounting\documents\)
for file in filelist:
datestr = file[19:-4]
You'd need to work out what to do with datestr next... perhaps write it to a table or update an ODI variable with it.
Hope this is of some help.

Error Occurred While Converting the file"name of song" The file name.......

I get this message when I try to import some CD's to my library.
A window pops up and says
Error occurred while converting the file "name of song"
The file name was invalid or to long.
Anyone else ever get this message, and how can you import CD's???????

I have had this exact same problem. I'm not sure how to fix it...

How to get the file name from Oracle B2B 10g

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

How to get the Country name from where the user access the website ?????

          Hi ,
          i have a requiremtn in which i want to display the country name from where
          the user browse our webpages . for example if he is browsing from us , then i
          should display US and if he is browsing from UK , then i should dispaly "uk" etc...
          can anyone guide me how to proceed .
          thanks in advance
          Regards
          Subu


          Hi Laura Taylor ,
          Thanks for your Reply and Thanks for ur Guidelines.
          Thanks & Regards
          Subu.
          "Laura Taylor" <[email protected]> wrote:
          >
          >Unfortunately, there is no way to determine the country unless the client
          >indicates
          >that to you directly(i.e. via a form input value). However, there are
          >two request
          >headers that can help you determine the language preference(s) of the
          >client:
          >
          >Accept-Language -- Specifies the language preference(s) the client prefers
          >to
          >receive.
          >Accept-Charset -- Identifies the charset(s) the client understands.
          >
          >Laura
          >Developer Relations Engineer
          >BEA Support
          >
          >
          >"Subu" <[email protected]> wrote:
          >>
          >>Hi ,
          >> i have a requiremtn in which i want to display the country name
          >from
          >>where
          >>the user browse our webpages . for example if he is browsing from us
          >>, then i
          >>should display US and if he is browsing from UK , then i should dispaly
          >>"uk" etc...
          >>can anyone guide me how to proceed .
          >>
          >>thanks in advance
          >>
          >>Regards
          >>Subu
          >

Is there a way to alter the file name given to the attachments in an email button?

When ever I click the standard email button, I get an attachement with random alfa and numeric characters for the file name. Is there any way to change the files names to match a data field in the form or start with something I choose?
Thanks,
Judy

Hi RudyLou36,
While viewing the form in Preview TAB of LC Designer you will always get the junk characters as the name of the file. Save the file and open it in Acrobat or Reader.
You won't be able to change the filename unless you save the file first. Here (http://forums.adobe.com/thread/462681) is an example of a number of ways to deal with parts of the email programatically.
Regards,
ratnesh

Is there a way of printing the file name from within the Preview application?

Similar Messages

Maybe you are looking for