Is there a way on how to create different Synch settings for iPhone / iPad

Okay,
My first time in this forum. I have an iPad and an iPhone. Everytime I sync my iPad and my iPhone with iTunes the sync settings are the same in both devices. So everytime I sync devices Apps that I have in my iPad show up in iPhone and vice versa. Is there a way to create different sync settings for my iphone and iPad?. Basically I do not want Apps from my iPads to be synched with iPhone and Apps that I have in my iPhone to be synched with my iPad. It is kind of annoying that everytime I synch I have to remove apps from my iPhone.
Can I also do the same for playlists?

Each device has its own set of sync preferences. What you may be seeing is the result of the Automatically sync new Apps option listed underneath the list of apps on the Apps tab. Untick this for each device next time you sync and then purchases made on one device won't automatically turn up on the other. You shoud also make sure automatic downloads are disabled in Settings > iTunes & App Stores.
tt2

Similar Messages

I created an album on the iPhone but when sync'ed to the mac, the album disappears. Is there a way to share albums created in iphoto on the iphone with the iphoto on the mac?

I created an album on the iPhone but when sync'ed to the mac, the album disappears. Is there a way to share albums created in iphoto on the iphone with the iphoto on the mac?

Is there a way to share albums created in iphoto on the iphone with the iphoto on the mac?
No, there is not yet a way to do that. Albums created on the iPhone cannot be synced back to the mac.
You might try other ways to send photos back to the mac in a structured way, depending on your IOS version:
You could use Journals instead of albums. If you share a Journal, you can see it on your Mac. http://support.apple.com/kb/PH3152
Or create shared photo streams. iCloud: Using and troubleshooting Shared Photo Streams
Regards
Léonie

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create different log files for different users in log4j

I want to create different logs for different users, using different appenders for each user so that logs are created in his file only.
Confusion:How to direct them to different files in my logger class

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to create different users in the same iPad 4?

I would like to share my new iPad with other person. How can I create two users.?

The iPad does not support multiple user accounts.

TS1702 Is there a way to lock out or restore original settings on an iPad used in a school lab setting. We need something like the program cornerstone, which will allow the iPad to revert back to its original setup.

We setup iPads for a mobile lab and students change the settings or set up a pass code on the iPad. Is there a way to lock the settings folder or an app to revert any changes back to the original set up like the program cornerstone (for a pc)?

you might need to post this question on iPad in the Enterprice community
check these posts, it might help:
https://discussions.apple.com/message/18419745#18419745
https://discussions.apple.com/message/11401701#11401701

Going to hotel with wired broadband internet service. how do i convert to wifi for iphone ,ipad

Going to hotel with wired broadband internet service in room. What is easiest way to coinvert broadband to wifi for my iphone , Ipad and ipoi ?

Connect the ethernet cable to an Airport Express to provide Wi-Fi for your iDevices.
http://www.apple.com/airport-express/

How to create different log files for different levels

Hi,
Can some one please help me with my problem I have here?
I want to send log data to two diffrent files depending on the logging level such as DEBUG and WARN using the same logger instance.
How can you configure this in log4j.properties.
Please post sample code for log4j.properties to achieve this.
Thanks in advance.
Anurag SIngh

Hi,
I have tried your code. the issue is other log file for error is blank. its not writting log to that file.
following is the code of my log4j.properties
Please read the code first
# Set root logger level to DEBUG and its only appender to A1.
log4j.rootCategory=DEBUG,A1
#Appender and its layout for A1
log4j.appender.A1=org.apache.log4j.FileAppender
log4j.appender.A1.layout=org.apache.log4j.PatternLayout
log4j.appender.A1.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %log4j.appender.A1.Threshold=DEBUG
log4j.appender.A1.File=./LogonApplication_Debug.log
log4j.appender.A1.Append=true
#Appender and its layout for A2
log4j.appender.A2=org.apache.log4j.FileAppender
log4j.appender.A2.layout=org.apache.log4j.PatternLayout
log4j.appender.A2.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %
log4j.appender.A2.Threshold=ERROR
log4j.appender.A2.File=./LogonApplication_Error.log
log4j.appender.A2.Append=true
In my logger class i have written something like this:
public static Logger myLogger = Logger.getLogger (LoggerTest.class.getName());
     public static void main(String args[]){
          myLogger.debug("I have logged a debug message");
          myLogger.error("I have logged an error message");
Issue:
Now the problem is that it is creating two files specified in the configuration but it is logging messages both the messages debug and error in only ./LogonApplication_Debug.log file.
Though it is creating the ./LogonApplication_Error.log file, but it is only blank.
Can you please trace whats missing/wrong.
Thanks a lot.
Shanu

Is there a way to auto-configure the optimal screen settings for a macbook pro running windows 7? When running Lion the screen looks 10x better.

Just like the title reads. 2011 MBP Quad Core 15". Used boot camp to instal Windows 7 Home premium but screen resolution is bad. Thank you

No. Reopen Boot Camp Assistant and click on the Continue button. You'll see in that screen a checkbox to download drivers. Check that box and uncheck the other boxes. Have a freshly formatted USB flash drive or hard drive connected. Must be partitioned MBR and formatted FAT32. You can format it while in Windows. Have it connected when you use Boot Camp Assistant. Once you click on the Continue button again BCA will attempt to download the drivers.
Once you have the drivers boot Windows. It should autorun the installer you downloaded after Windows gets itself settled in.

How to use differing 'My Info' on iPhone/iPad

Hi everyone,
I am using an iPhone and my wife an iPad. Both devices are set up using the same Apple ID in order to easily share App Store purchases and for iCloud as well. In Settings.app under Mail, Contacts, Calendars you can tell the device who you are by selecting your contact info under My Info. So I did select mine on the iPhone and my wife’s contact on the iPad. So far so good. But sometimes, and I haven’t quite found out how and why, this Info automatically changes!
It is always the last edited setting which propagates to the other device. So for example, if I set my info on the iPhone and afterwards my wife’s on the iPad I well end up with her info on my iPhone as well. It happens the other way around, too. I haven’t yet figured out how this happens. So it could be over the air or while syncing via USB which I sometimes do for faster device backups. It could also happen when using a specific app or service.
Maybe someone can shed some light on this? I’m sure that I could just use separate Apple IDs on both devices, but I’d rather not. Everything works and is easier to handle. Even FaceTime and iMessage support different Caller IDs when using the same Apple ID. So it’s only this little thing that’s left…
Thanks and hoping for a solution
Björn

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

Is there a way to link or create a widget that links back to the iTunes U app on your iPad from your iBook?

Is there a way to link or create a widget that links back to the iTunes U app on your iPad from your iBook?
I have already found the Apple Widget Builder (http://widgets.itunes.apple.com/builder/) and that works fine if you want to link to the "App Store", but I want to know if there is a way to "open an app" that is already installed on the iPad instead of double tapping the home button to switch between apps. (I know using the home button is very simple, but I am trying to find an even easier way to just "tap a widget" or "link" that will open iTunes U right up) I am only asking if this is possible for people who may have a hard time running an iPad at the beginning.
I appreciate any help, thanks!

I appreciate your help, but I had already looked at LinkMaker and I thought that was my answer, but as far as I could tell that still only links to an app in the app store. Yes it will link to iTunes U in the app store and you can then hit Open, but that is too drawn out of a process. We would like to know a way to just open the app directly.
Thank you!

Is there a way on CONVERSION to create a sales order with a scheduled ship date in the past?

Is there a way on CONVERSION to create a sales order with a scheduled ship date in the past?
Customer wants to maintain the original scheduled ship date on converted ordered, but the scheduled dates is defaulting to sysdate for past due shipments on converted orders.

Hi Friend,
As of now there is no functionality to display SSD,RD,PD backdated, max it can be sys date, not lower then that.
Regards
Shyam
Please see following Metalink Note ID for all in One solutions
Oracle E-Business : All In One Metalink Note ID's
If you are happy with the Document, please mark as Helpful by doing so this will provide assistance for other people looking for answers to their queries.

Is there a way to re set Lightroom to original settings, I have been playing around with it and got somewhere that I don't know how to get out of...not particularly computer savvu

Is there a way to re set Lightroom to original settings, I have been playing around with it and got to a place I don't know how to get out of. Not very computer savvy

To begin, quit Lightroom
On Windows do the following
Click the Windows start button and in the search box type:-
%appdata%\adobe\lightroom
Then press the Return\Enter key
That will take you to the Lightroom folder (see image below)
Select the Preferences folder and hit delete to send it to the recycle bin.
Close the Lightroom folder and re-start the Lightroom program.

How can I creat my own app for iPhone by simple way?

Hi
can you help me please
I need to make an app for my charity company
but I don't know how can I do app for iPhone
I hope to hear from u
thanx

How about creating the ringtone on your iPhone? You may want to check this out:
http://www.macworld.com/article/2010514/how-to-create-a-ringtone-on-your-iphone- with-garageband.html
You need GarageBand 1.3 for iOS - is your iPhone compatible with that?

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Is there a way on how to create different Synch settings for iPhone / iPad

Similar Messages

Maybe you are looking for