Is there a way presenter remember where the user left off in the side?

Hello,
is there a way presenter remember when the user left off in the side?
Example: user watching the presenter and they didn't finish the whole presentation.
When they launch the presenter again, would the presenter remember where they left off.
I see this feature on articulate presenter.
Can some one advice on this?
Thanks,
s

Hello JR -
The following is a link to a thread about inactive vs active sessions.
Re: Active vs Inactive Sessions
While you are not interested in if the session is active or not, you are interested in if the session has ever been. You may be able to modify the queries in the above thread to detect if the user has ever logged in historically.
Austin

Similar Messages

HT1689 If i have an iPhone that was stolen and is not hooked up through a carrier is there a way to locate where the phone is?

If i have an iPhone that was stolen and is not hooked up through a carrier is there a way to locate where the phone is?

No.

IS THERE A WAY TO REARRANGE WHERE THE TOOLBARS ARE SHOWN?

i need for the bookmarks toolbar 2 be directly above the tabs then other tool-bars 2 be above them,, however i would like 2 be able 2 arrange the other bars where i want them.

Hi Mike,
I believe you are talking about the Metadata (data about data) that is part of files. While LabVIEW gives you access to some of the standard metadata (creation date, modified date, access rights, etc.) it does not provide access to the custom metadata that is part of a file. I am sure there is a Windows API function call that will give you access to the information. However, I do not know what that function call is.
From googling the subject, it seems that there are several programs out there to extract metadata for specific files (jpg, avi, flash etc.) So it is possible that each file type has a custom extraction routing. However, that doesn't explain how windows extracts it.
So your best option is to probably look for a Windows API call that can get you the information.
Regards,
Jack J.
Applications Engineer
NI

Creative Cloud Enterprise: Is there a way to choose where the package temp files are downloaded?

I am an Enterprise Admin and have to use a Windows computer to download and create different Creative Cloud packages. The temp package files first download to the C:\ (system drive) and then the actual package in the location you specified; usually on another drive/partition. I have to make the C:\ partition (by re-partitioning) much larger than normal size in order to make temp package files to fit if I don't the C:\ drive fills up and the package creation just stops/fails with no messages displayed. Could an option be made to direct where you want the the temp package files to be held such as selecting a different hard drive/partition to store them?
I create both 32 and 64 bit CC packages.

Hi JohnBNO,
You can change the CC cache location. Please refer the article: http://helpx.adobe.com/creative-cloud/packager/creating-packages.html.
Regards,
Romit Sinha

Is there a way to specify where an app starts on your screen

Is there a way to specify where the JFrame will appear on your screen at runtime by default? For me it always starts on the upper left hand corner, and I want it more in the middle.

Sorry, that should actually read:
    frame.setSize(800, 600);
    // center the frame
    Dimension size = frame.getSize();
    Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();
    frame.setLocation((screen.width - size.width) / 2, (screen.height - size.height) / 2);
    frame.setVisible(true);cheers,
Greg

Bookmark / return to where user left off tracker -- Flash 8?

Is there a template or plug in that anyone is aware of that is written in Flash 8 that keeps track ("bookmark of sort") of where a user left off on a .swf or .htm tutorial that includes:
The user must be able to leave a .swf or .htm tutorial and return to it later if necessary, “bookmark” their place – it does not have to be completed at one sitting.
For reference and viewing purposes, the user must be able to go back into the .swf or .htm tutorial once successfully completing it.
The .swf or .htm tutorials must have a mechanism for keeping track of user progress and completion. It must provide reports on user status and who has successfully completed the tutorial.
Cindy

you'll need to build that yourself. you can use the flash sharedobject unless you need to store user progress in a central (server-based) database.

HT201363 I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have

I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have?

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

There any way to know where my ipad, because it was stolen? and do not use iCloud? besides not remember if you have installed any applications to track it?

there any way to know where my ipad, because it was stolen? and do not use iCloud? besides not remember if you have installed any applications to track it?

If you did not set up Find My iPad, then there is no way to track it. Contact the police and change any passwords for any online accounts you may have used from your iPad (the iTunes Store, for instance).
Regards.

I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, I can't use outlook else where, is there any way I can reset the settings in order to be able to use outlook every where?

I have microsoft outlook installed on my Mac book pro, I can only use the outlook with the office server where it was setup, outlook won't work out of office, is there any way I can reset the settings in order to be able to use outlook every where?

I can see my folders by clicking the X next to my name on the Inbox Folder. So I have my folders now, just cannot see them in the left colum or see multiple windows on Outlook. At this point, I can use the folders, just with limited functionality. Thanks -Gina

Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

Is there any way (or app) where I can change the qwerty keypad to the telephone textpad?

Hi! You can't do it without jailbraek. And I offer you "don't try it"!

Is there a way to securely erase the drive during a fresh install

I'm selling my iMac G5 and Powerbook G4 so I can afford a brand new Intel iMac (the 2.8GHz one). I have Leopard running on both these machines at the moment, but on the iMac G5, I want to restore it to factory settings using the original Tiger install discs (I've lost the ones for the laptop).
I would like to ensure that these computers don't have any personal data on them before they leave... is there a way to completely scrub the drives before performing a reinstall? My only other option at present is to reinstall, then use Disk Utility to securely erase all free space... but I can't remember if that option was available in Tiger.
Perhaps there's some even better way I can prepare these machines for a new user that I haven't thought of?

Ok, I found the best way to ensure that all your personal data is gone before you sell your Mac is as follows:
1. Perform a reinstall of OS X (selecting erase and install)
2. When install has completed, create a quick test account so you can log in
3. Run Disk Utility and erase all free space to the required level (I chose 7 times overwrite)
4. Perform a reinstall of OS X (selecting erase and install) and power the machine off afterwards (when you get the first setup screen.
My reasoning is that after the first fresh install, you only have OS X's files on the filesystem. Any personal data that hasn't been overwritten is in the free disk space. Disk Utility then clears that up and the second fresh install allows you to get the machine to the state you normally get a brand new Mac in (i.e. prompts you for initial setup information).

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive w

How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.

If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files.

I have an external server that stores all my movies and music, is there a way to stream it to my apple tv? If not is there a way I can link the folders to itunes (without downloading files to computer) and will that make them view-able for the apple TV?

I have an external server that stores all my movies and music, is there a way to stream it to my apple tv?
If not is there a way I can link the folders to itunes (without downloading files to computer) that will make them view-able for the apple TV?
If none of that works is there a way to get it working alternativly?
Additional Information:
Everything is linked via ethernet cable.
I'm using a PC to set it up.
If you have any other questions feel free to ask and I'll help where I can.
Thank you for any help

(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.

HT201269 Is there a way to download/port the missing data/SMS to one iPhone without overwriting the new SMS on the newer iPhone?

SMS Transferring/downloading/backup : Is there a way to download/port the missing data/SMS to one iPhone without overwriting the new SMS on the newer iPhone? Here is my dilemma. My iPhone quit working and I couldn’t get it fixed as quickly as I needed to. I bought a used iPhone and started using it normally and downloaded the backup from itunes/icloud. There was a large gap in data where the first iPhone didn’t backup when I thought it had. I have SMS data on both phonesnow and I need them for a court hearing. I have since had the other iPhone repaired and working perfectly. Will downloading a backup wipe out the newer SMS data? I am nervous because I can’t lose the information or my case mey be compromised. Any “Real Help” including programs that work to accomplish this would be very helpful. Thank You in advance…

No, direct access to manipulating the phone's filesystem is not permitted for 3rd party apps in the iOS. It can't be done without hacking the phone, which you certainly don't want to do. The messages can be combined and viewed on your computer, but not on a single phone.

Is there a way to dynamically determine the number of out parameters for a server side procedure?

Hi,
Below is a helper method used for calling a server-side function which loops through the inbound bindVars parameter to populate the function's IN parameters. Is there a way to dynamically determine the IN/OUT parameters based on the procedure name in the stmt parameter? No members of the CallableStatement class seemed promising, but the getParameterMetaData() method in the PreparedStatement class seemed like it could be helpful lead. However, I have not found any detailed descriptions (yet) of how to use it.
protected Object callStoredFunction(int sqlReturnType, String stmt,
Object[] bindVars) {
CallableStatement st = null;
try {
// 1. Create a JDBC CallabledStatement
st = getDBTransaction().createCallableStatement(
"begin ? := "+stmt+";end;",0);
// 2. Register the first bind variable for the return value
st.registerOutParameter(1, sqlReturnType);
if (bindVars != null) {
// 3. Loop over values for the bind variables passed in, if any
for (int z = 0; z < bindVars.length; z++) {
// 4. Set the value of user-supplied bind vars in the stmt
st.setObject(z + 2, bindVars[z]);
// 5. Set the value of user-supplied bind vars in the stmt
st.executeUpdate();
// 6. Return the value of the first bind variable
return st.getObject(1);
catch (SQLException e) {
throw new JboException(e);
finally {
if (st != null) {
try {
// 7. Close the statement
st.close();
catch (SQLException e) {}
James

The PreparedStatement.getParameterMetaData() object is exactly what you need for this task.
Once you have the ParameterMetaData you can ask it how many parameters are present and which mode they are. The parameters are numbered from 1 to n and you can use ParameterMetaData.getParameterMode(1); to get the mode of the 1st parameter. The modes are defined as static values in the ParameterMetaData object. Check out the doc at http://docs.oracle.com/javase/7/docs/api/java/sql/ParameterMetaData.html
Timo

Is there a way presenter remember where the user left off in the side?

Similar Messages

Maybe you are looking for