Is there a way to access ABAP OO instances from a batch job report

Hello,
I am looking for a way to access ABAP OO instances from a batch job report. My circumstances are the following:
I have got some ABAP OO coding that identifies other objects (class instances) that have to be processed (they have a DoIt method that does some calculation). As this processing is time consuming and performace relevant I have to parallelize this in batch jobs. This batch jobs however can only be "simple" ABAP reports according to SM36. The problem is now that I dont really know how to tell the batch job report what objects to process. Somehow I have to access theses instances from that batch job report.
Does anybody have an idea?
Greetings
Matthias

Hi David,
thanks a lot for your help. After a lot of searching on the net this seems to be the only way to cope with it. However I am not sure about the locking mechanisms and if its suitable for mass data processing. In the help page you suggested the following is stated which I do not fully understand::
"The current lock logic does not enable you to set specific locks for the following requirements:
·        Many parallel read and write accesses
·        Frequent write accesses
·        Division into changeable and non-changeable areas
Although the lock logic makes the first two points technically possible, they are not practical because most accesses would be rejected."
Does this mean
a) if I dont want to set "specific locks" for frequent write accessess I am fine
or
b) I am discouraged from use shared memory technics for frequent write accessess?
In the latter case I will have a problem...
What do you think?
Greets
Matthias

Similar Messages

Is there a way to access saved sms/mms from memory card on pc or new phone?

I saved my text messages to the memory card and was able to view them in c510 phone. The screen on that phone wrecked and I got a new c510, but the text messages, etc. that are saved on the memory card are not detected on the new c510.
Is there a way to access the saved text messages on the memory card either on the new c510 or on my pc?
Please help...these are very important text messages.

Thanks Dr. Chris...I thought my messages were safe on the memory card while my phone was sent for repair, but the phone was not fixed and I think they did a software upgrade and I can't access my messages on my original phone. I bought a new c510 thinking that it could read the messages from the memory card, but it doesn't. I'm really confused how the messages are saved on the memory card, but there is no way to access them...very weird. Someone should invent something that can do this...I think they would make alot of money.
In future, what is the best way to save important text messages other than saving them to the sim card?

Is there a way to access only my files from my favorites on finder to files on a microsoft based server?

I have all my favorites currently set up as folders on the drive and accessible all the time when my MBPR is connected via ethernet to a TB display.
The reason I pose this question is because I want all the perks of being able to access my server files remotely but without actually accessing the whole server or computer.
Ideally this would be the ultimate solution.

Thanks Dr. Chris...I thought my messages were safe on the memory card while my phone was sent for repair, but the phone was not fixed and I think they did a software upgrade and I can't access my messages on my original phone. I bought a new c510 thinking that it could read the messages from the memory card, but it doesn't. I'm really confused how the messages are saved on the memory card, but there is no way to access them...very weird. Someone should invent something that can do this...I think they would make alot of money.
In future, what is the best way to save important text messages other than saving them to the sim card?

Is there a way to access more of my codecs to render with in AE 4.1 ?

Hi all,
I'm a new user using an old version of AE 4.1 on Windows 7.
Is there a way to access more of my available codecs to render with in AE 4.1 ?
When I go to export as an AVI file in AE 4.1 I only have the CINEPAK, DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs available as choices, and then NONE for uncompressed output.
Yet when I render to AVI in Adobe Premiere I have the CAMSTUDIO LOSSLESS, CINEPAK, HUFFYUV, INTEL IYUV, LAGARITH LOSSLESS, MICROSOFT RLE, MICROSOFT VIDEO 1, MSU SCREEN CAPTURE LOSSLESS, x264VFW-H.264/MPEG-4 AVC and the XVID MPEG-4 codecs all available to render with. I usually use the XVID MPEG-4 codec to render with for best quality for file size, or the LAGARITH LOSSLESS codec to render with if I need to plug a file back in to Premiere since Premiere has limited AVI file codec import capabilities.
Why aren't the rest of my codecs available to render with in AE 4.1 ?
The problems are (as seen in the screenshots below)...
1) The CINEPAK codec renders the correct file format size and aspect-ratio that my project is (1280x720) but outputs an AVI file that can not be imported in to Premiere and can not be converted by two different converters.
2) The NONE-UNCOMPRESSED option renders the correct size format file but outputs an AVI file so large (over 6 gigs) that it can not be use practically in Premiere and it will not even play in a video player.
3) The DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs render in incorrect aspect ratio and format sizes (770x576) regardless of which aspect ratio is selected (as seen at the bottom of the screenshot below), resizing my project size and they will not import in to Premiere... these can be converted to an H.264 AVI file in one of my converters that Premeire will then import, but they are still the wrong size and they loose sharpness if they are resized (stretched) during conversion.
Please see the screenshots below for clarification.
Thanks for any input,
digi

Wow, thanks again Andrew. That works.
All my codecs showing up via Composition/Make Movie. Its weird, when I tried using the H.264 codec (Premiere likes H.264 and Lagarith Lossless), the H.264 rendered a strange 800 and something by 720 size instead of the selected and displayed 1280x720 format that the project is in and speced in the Render interface.
But when I used the Lagarith Lossless codec, I get the right size and everything looks good at 1280x720.
Before you wrote back, I was able to convert one of the 770x576 size DV-PAL files to H.264 via the Freemake converter, and then that imported in to my Premiere file... but that is a moot point now that I can get the correct size file with the Lagarith codec.
I would have been able to use the converted 770x576 (properties says 720x576, but it measures out at 770x576) DV-PAL files for this project with the digital clock and get it to import in to Premiere correctly... since I could just place the clock face when blackscreened in my 1280x720 Premiere project, but now I can use the full size Lagarith rendered file for this and other projects from AE that require the full frame of composition.
Thanks so much... your the most efficient forum guy I've ever had answer a question... no restating or misunderstanding... just pure useful answers.
Thanks a trillion,
digi

Is there a way to access the "Creative Cloud Clipboard" repository outside Adobe Line/Sketch Apps?

Is there a way to access the "Creative Cloud Clipboard" repository outside Adobe Line/Sketch Apps?
For instance via (macbookpro) web, local directory (CC desktop), or mobile web? As opposed to Utilizing the feature purely in Adobe line/sketch?
I mean... I know i could just take screen shots... via the iPad's protocol. However, that would defeat the purpose of creative cloud.
The point of accessing the creative cloud clipboard, is so that I can create Time-Lapse .GIF's of my drawings, Using the "timeline" feature (undo)....which is amazing feature btw.
Honestly the solution for me... would be to have an option to export a .GIF (animated), .tiff sequence, or video file (m4a mov). I would say export options would be 1. File Size & Type (Context...) 2. Detail, # of Slides (How long is your timeline, what do you want to show, what level of detail?) 3. Share (Behance, Creative Cloud Files, MMS, iMessage, etc... 4. Open in... Photoshop, Aftereffects etc...
I think this would be great for..tutorials, multi-media, prototyping (wireframes, character design, etc). So, i'm not saying this should be a heavy set...focal point of the application, after all an animation app all itself would be nice. However, I think a feature like an "interactive timeline" would push users to be even more creative, by hacking, creating ghetto rigged *** backwards ways of prototyping that...actually might be more convenient. This is the story Adobe is trying to tell, the story of process, whats in your head... in the moment. Thats why behance is integrated, because process & feedback + exposure are essential to developing as a creative, so Adobe has put together a great platform...for its users. So, yeah...Adobe.. here's your chance to gain a greater insight into creative process, and integrate it directly into the creative cloud platform. I think it would be huge for Ink & Slide , Behance, and Student-Teacher / Designer- Company relationship.
"Share | Project Timeline " "Intervals | # of images" "Crop | Length (time)" "Crop | Project Area (artboard?)"
Yeah this question took a left turn...but hey.... either or.
EDITS............
***You can copy images to creative cloud files....via the share function in ADOBE SKETCH... thats how I made the .gifs im going to attach.***
***However, in ADOBE LINE, if you try to copy multiple images of the same project, they do not receive unique filenames, thus replacing all images in the saved sequence****

First, to answer your initial question - no there is no way to access the clipboard content outside of the apps at this time.
The idea of exporting a timelapse is very interesting, and something we have been thinking about, but there are already some decent ways to do this. Check out this video of a drawing in Line created by Brian Yap Adobe Ink and Adobe Line Illustration - YouTube
You can create this kind of video using several of the available apps that let you display your iPad screen on your computer using Airple. Some examples are Reflector http://www.airsquirrels.com/reflector/ and AirServer http://www.airserver.com/

Is there a way to access purchased apps from the app store on windows computer? For USB boot drive

Having a problem with my Macbook (13", Late 2009 I believe) after attemption to update iOS to OS Mavericks. Have run into the grey screen of death, and have almost exhausted all options, including reseting pram, accessing fsck, and even using disk utility to reinstall the iOS. I believe that during the initial update (which is the root of the problem), there was some corruption within the directories which I believe can be contributing to my problem.
I was hoping to find a way to access my purchased apps from the app store on a windows computer so that I can make a USB boot drive in order to rule out the hardware problem that I am currently speculating.
Please advise, thanks in advance!

Yes if you have the iPod and iTunes set up to sync via wifi. However, you have to do it from your one syncing computer and the iPod and computer have to be on the same network.

Is there a way to access my old Notes only? I still have my old back up but I cant sync to my phone or it will corrupt it.

I am using an iphone 5. Recently it malfunctioned and I was told by apple that my old back up had a corruption with it an caused my phone to malfunction. Apple had to redownload the operating system. I was also told that I can not use my old back on my phone I need to delete it and manually download everything. I DID NOT USE ICLOUD. However I do have my old back up still on my mac in itunes. Question below....
Is there a way to access my old Notes only so I can rewrite them in my phone? I still have my old back up but I cant sync to my phone or it will corrupt it. I just want to access my notes so I can type them back into my notes on my fixed phone.

you can restore from your backup again just to get the notes. once you've restored from the backup, copy your notes into your icloud notes group or email them to yourself - basically, get them somewhere else so they're not just locally stored on the device. once you've moved your notes elsewhere, restore the device as new again like apple had you do. this will again put a fresh version of the operating system on your phone like it has right now
there's no other way to access the notes that are in your backup

Is there any way to access files from the Classic environment to my iMac running on Leopard (10.5.8)?

Is there any way to access files from the Classic environment to my iMac running on Leopard (10.5.8)?

Sorry, no.

Is there a way to access 11i from outside other than Self service?

Is there a way to access 11i from outside other than Self service?
I could connect any application from inside the firewall (basically router) and can not access screens from outside. Eventhough port forwarding 80 allows us upto initial screen, it does not go further.
Any workaround/suggestions
Jiltin

Hi Jiltin,
If you can migrate your forms server into Forms Listener Servlet.This will allow you to use forms outside firewall provided atleast one port(assuming yours 80) is open.
Ref to the M.Link Note 201340.1 for how to setup forms listener servlet.
Magesh

Is there any way to access a PDF in iCloud on an iOS device?

After a PDF has been saved in iCloud, is there any way to access it from an iOS device (iPad)?

No, you can only view it from a Mac that is signed into your account.

I had my iphone stolen which had quite a lot of music on that I had downloaded from itunes but not synced with itunes on my computer.Is there any way to access the music now or is it lost?

Hi,
I had my iphone stolen a few weeks ago which had quite a lot of music on that I had downloaded from itunes via my phone but had not synced with itunes on my computer.
Is there any way to access the music now or is it lost? Thanks x

By any chance, did you have the Find My iPhone app installed prior to it being stolen?
Reporting a lost or stolen Apple product
Hopefully you had your iTunes purchases backed up to an external source such as an external drive or CD's?

Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?

Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”. Is there a way to get around this?
Any advice would be greatly appreciated, thanks so much!

You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all. It also won't be easy when the time comes to relocate it all to different drives.
You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library. Next read about how to selectively consolidate items to the external drive.
Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
"...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links. If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences. Changing media folder preferences only applies to new files added, not old ones.
Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

Is there a way to access my wish list in iTunes from my iPad

Is there a way to access my wish list in iTunes from my iPad

I'm asking the same sort of question in another thread. I had access to my wish list on my ipad2 but now I can't seem to find it. Dammed frustrating.

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad

Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad. I don't want to lock him out of the iPad. Let him use Angry birds, but not Sims or Games not appropriate for him that I play.

Sorry, but it is not possible to restrict use of specific apps other that the few restrictions provided in the Restrictions settings, not unless the app itself provides some sort of lock. If you don't want your child playing certain games, the only answer is to not load them on the iPad he uses.
Regards.

Is there any way to run abap program in dialog process with process chain?

Hi.
I just want to run custom abap program in every 30min.
so I made process chain and connect abap program.
but it returns NOTHING when background running.
the program has ABSOLUETLY no problem when it's running DIALOG process.
custom program is modified from sap standard program for my use.
so complicated and hard to read that I cann't figure out what's problem in backgound job and even hard to debug in background process.
is there any way to run abap program in dialog process in every 30 min.?
or call BSP page or call function.
any solution will be helpful that excuting PROGRAM or FUNCTION or BSP PAGE in schedule job and should running dialog process.
thanks.
Lee.

Hi,
did you try using sm36 transaction?
1Give these values in Gereral data
Create one sample job "SAMPLE JOB"
Priority "A"
Execu target - Your application server
2Click start conditon
schedule according to ur requirements.
3.Click Step button
Give your ABAP program name.
fill variants if it has any variants.
if it is useful assign points
Regard,
Senthil Kumar.P

Is there a way to access ABAP OO instances from a batch job report

Similar Messages

Maybe you are looking for