Is there a way to access only my files from my favorites on finder to files on a microsoft based server?

I have all my favorites currently set up as folders on the drive and accessible all the time when my MBPR is connected via ethernet to a TB display.
The reason I pose this question is because I want all the perks of being able to access my server files remotely but without actually accessing the whole server or computer.
Ideally this would be the ultimate solution.

Thanks Dr. Chris...I thought my messages were safe on the memory card while my phone was sent for repair, but the phone was not fixed and I think they did a software upgrade and I can't access my messages on my original phone. I bought a new c510 thinking that it could read the messages from the memory card, but it doesn't. I'm really confused how the messages are saved on the memory card, but there is no way to access them...very weird. Someone should invent something that can do this...I think they would make alot of money.
In future, what is the best way to save important text messages other than saving them to the sim card?

Similar Messages

  • Is there a way to access ABAP OO instances from a batch job report

    Hello,
    I am looking for a way to access ABAP OO instances from a batch job report. My circumstances are the following:
    I have got some ABAP OO coding that identifies other objects (class instances) that have to be processed (they have a DoIt method that does some calculation). As this processing is time consuming and performace relevant I have to parallelize this in batch jobs. This batch jobs however can only be "simple" ABAP reports according to SM36. The problem is now that I dont really know how to tell the batch job report what objects to process. Somehow I have to access theses instances from  that batch job report.
    Does anybody have an idea?
    Greetings
    Matthias

    Hi David,
    thanks a lot for your help. After a lot of searching on the net this seems to be the only way to cope with it. However I am not sure about the locking mechanisms and if its suitable for mass data processing. In the help page you suggested the following is stated which I do not fully understand::
    "The current lock logic does not enable you to set specific locks for the following requirements:
    ·        Many parallel read and write accesses
    ·        Frequent write accesses
    ·        Division into changeable and non-changeable areas
    Although the lock logic makes the first two points technically possible, they are not practical because most accesses would be rejected."
    Does this mean
    a) if I dont want to set "specific locks" for frequent write accessess I am fine
    or
    b) I am discouraged from use shared memory technics for frequent write accessess?
    In the latter case I will have a problem...
    What do you think?
    Greets
    Matthias

  • Is there a way to access saved sms/mms from memory card on pc or new phone?

    I saved my text messages to the memory card and was able to view them in c510 phone. The screen on that phone wrecked and I got a new c510, but the text messages, etc. that are saved on the memory card are not detected on the new c510.
    Is there a way to access the saved text messages on the memory card either on the new c510 or on my pc?
    Please help...these are very important text messages.

    Thanks Dr. Chris...I thought my messages were safe on the memory card while my phone was sent for repair, but the phone was not fixed and I think they did a software upgrade and I can't access my messages on my original phone. I bought a new c510 thinking that it could read the messages from the memory card, but it doesn't. I'm really confused how the messages are saved on the memory card, but there is no way to access them...very weird. Someone should invent something that can do this...I think they would make alot of money.
    In future, what is the best way to save important text messages other than saving them to the sim card?

  • Is there a way to sync only my music from my iphone to my ipad and NOT anything else like apps?

    I have an iPhone 3 and a brand new iPad 2. I was wondering if there was a way I can sync my music, but not everything else such as apps. I don't want my apps from my phone on my ipad, only the music. How do I go about this?
    Please&Thankyou!!

    iTunes will only give you the option to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    Purchased applications can be downloaded over again, see this article for details: How to redownload purchased applications from the App Store
    For everything else (music from CDs etc.) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod Touch or iPhone. You'll find that they have varying degrees of functionality and some will transfer data (such as playcounts and ratings), movies, videos, photos, podcasts and games as well.
    A selection of iPod/iPhone to iTunes utilities:
    Senuti Mac Only (iPod Touch & iPhone compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

  • Is there a way to import only starred images from camera?

    Now that the Canon 7d can be starred in camera, sometimes for the sake of speed, I would only like to import those.  Any way to do this without manually looking through them and individually selecting them?
    Or is there another program where it is available?  I read up on Lightroom, but it seems it is not possible there.
    Thank you.

    Or is there another program where it is available?
    Bridge PhotoDownloader does not recognize the stars, nor can you filter them. I tried for experiment to rate a file on my 1Dx but to be honest it was quite an effort in finding the right menu and much action needed.
    Also tried (again experimental) to use Canon Image browser and Canon Digital Photo Professional using a card reader.
    Let's put it mildly, Canon is very good in manufacturing camera's but I really believe they should outsource the software department. It is again clear to me why I don't use their software, its just very unproductive and dead slow
    A workaround could be that you forget about rating in camera, load the files in Photodownloader and use the advance option to provide thumbnails. Wait a little for them to build, use the button uncheck all and the browse through the thumbs and select the ones you think you need fast, then hit 'Get Media' (but don't forget to import the rest of the files when you have a bit more time left)

  • HT204370 is there a way to move only SD video from my mac to my iPad?

    SO I need to save some iPad space.  I have SD/HD versions of movies and I thought the best way to open up some real-estate is to just move the SD versions to the pad.  Every time I try, The HD version winds up in there, taking up 4GB of space.
    Little help?

    See these 2 Links...
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991

  • Is there a way to access my old Notes only? I still have my old back up but I cant sync to my phone or it will corrupt it.

    I am using an iphone 5. Recently it malfunctioned and I was told by apple that my old back up had a corruption with it an caused my phone to malfunction. Apple had to redownload the operating system. I was also told that I can not use my old back on my phone I need to delete it and manually download everything. I DID NOT USE ICLOUD. However I do have my old back up still on my mac in itunes. Question below....
    Is there a way to access my old Notes only so I can rewrite them in my phone? I still have my old back up but I cant sync to my phone or it will corrupt it. I just want to access my notes so I can type them back into my notes on my fixed phone.

    you can restore from your backup again just to get the notes. once you've restored from the backup, copy your notes into your icloud notes group or email them to yourself - basically, get them somewhere else so they're not just locally stored on the device. once you've moved your notes elsewhere, restore the device as new again like apple had you do. this will again put a fresh version of the operating system on your phone like it has right now
    there's no other way to access the notes that are in your backup

  • Is there a way to access more of my codecs to render with in AE 4.1 ?

    Hi all,
    I'm a new user using an old version of AE 4.1 on Windows 7.
    Is there a way to access more of my available codecs to render with in AE 4.1 ?
    When I go to export as an AVI file in AE 4.1 I only have the CINEPAK, DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs available as choices, and then NONE for uncompressed output.
    Yet when I render to AVI in Adobe Premiere I have the CAMSTUDIO LOSSLESS, CINEPAK, HUFFYUV, INTEL IYUV, LAGARITH LOSSLESS, MICROSOFT RLE, MICROSOFT VIDEO 1, MSU SCREEN CAPTURE LOSSLESS, x264VFW-H.264/MPEG-4 AVC and the XVID MPEG-4 codecs all available to render with.  I usually use the XVID MPEG-4 codec to render with for best quality for file size, or the LAGARITH LOSSLESS codec to render with if I need to plug a file back in to Premiere since Premiere has limited AVI file codec import capabilities.
    Why aren't the rest of my codecs available to render with in AE 4.1 ?
    The problems are (as seen in the screenshots below)...
    1) The CINEPAK codec renders the correct file format size and aspect-ratio that my project is (1280x720) but outputs an AVI file that can not be imported in to Premiere and can not be converted by two different converters.
    2) The NONE-UNCOMPRESSED option renders the correct size format file but outputs an AVI file so large (over 6 gigs) that it can not be use practically in Premiere and it will not even play in a video player.
    3) The DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs render in incorrect aspect ratio and format sizes (770x576) regardless of which aspect ratio is selected (as seen at the bottom of the screenshot below), resizing my project size and they will not import in to Premiere... these can be converted to an H.264 AVI file in one of my converters  that Premeire will then import, but they are still the wrong size and they loose sharpness if they are resized (stretched) during conversion.
    Please see the screenshots below for clarification.
    Thanks for any input,
    digi

    Wow, thanks again Andrew.  That works.
    All my codecs showing up via Composition/Make Movie.  Its weird, when I tried using the H.264 codec (Premiere likes H.264 and Lagarith Lossless), the H.264 rendered a strange 800 and something by 720 size instead of the selected and displayed 1280x720 format that the project is in and speced in the Render interface.
    But when I used the Lagarith Lossless codec, I get the right size and everything looks good at 1280x720.
    Before you wrote back, I was able to convert one of the 770x576 size DV-PAL files to H.264 via the Freemake converter, and then that imported in to my Premiere file... but that is a moot point now that I can get the correct size file with the Lagarith codec.
    I would have been able to use the converted 770x576 (properties says 720x576, but it measures out at 770x576) DV-PAL files for this project with the digital clock and get it to import in to Premiere correctly... since I could just place the clock face when blackscreened in my 1280x720 Premiere project, but now I can use the full size Lagarith rendered file for this and other projects from AE that require the full frame of composition.
    Thanks so much... your the most efficient forum guy I've ever had answer a question... no restating or misunderstanding... just pure useful answers.
    Thanks a trillion,
    digi

  • Is there any way to access a PDF in iCloud on an iOS device?

    After a PDF has been saved in iCloud, is there any way to access it from an iOS device (iPad)?

    No, you can only view it from a Mac that is signed into your account.

  • Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?

    Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
    In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”.  Is there a way to get around this?
    Any advice would be greatly appreciated, thanks so much!

    You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all.  It also won't be easy when the time comes to relocate it all to different drives.
    You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library.  Next read about how to selectively consolidate items to the external drive.
    Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
    "...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
    Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links.  If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
    If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences.  Changing media folder preferences only applies to new files added, not old ones.
    Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391

  • Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad

    Is there a way to password protect certain apps from being used? Example I don't want my child to access my apps while he's using his on the iPad. I don't want to lock him out of the iPad. Let him use Angry birds, but not Sims or Games not appropriate for him that I play.

    Sorry, but it is not possible to restrict use of specific apps other that the few restrictions provided in the Restrictions settings, not unless the app itself provides some sort of lock. If you don't want your child playing certain games, the only answer is to not load them on the iPad he uses.
    Regards.

  • Is there a way to access purchase history of my itunes account  on I phone

    there a way to access purchase history of my itunes account  on I phone I need to pay outstanding  monies and have no money in my bank account till after the weekend. I purchased a itunes card. But I need to access purchase history from my itunes account  to press pay to pay  outstanding monies from I tunes card instead of my bank account which won't work due to lack of funds in it

    No. The only way to see it is to restore the backup to an iOS device.

  • Is there a way to access Warp Stabilizer's internal data?

    Hello,
    I have some footages where I pass through a relatively narrow gate with the camera. My footages are typically quite shaky and so far I have been using Warp Stabilizer with great satisfaction. It really works well. However, in these scenes it messes up: it seems to introduce a perturbation in the scale at the instant of passing through the gate (it quickly zooms out for a short instant), which messes up the background (which contains interesting stuff). Is there a way to access the internal data it produces during the analysis to cross-check my assumption, and try to manually correct it?
    Thank you very much
    Daniel

    Hello,
    Thank you for your response. I think the 'Preserve scale' option would do the job (if my suspicion is indeed correct). However, it does not exist for me. Do I miss something, or is it another version of PP? I am using Premiere Pro CC, and downloaded the app about a month ago (and I have only this 1 month of experience), so it should be pretty recent.
    (It would be nice to have some graphs showing the corrections PremierePro calculated during the analysis, like scale, rotation etc of the camera - but this is for mere curiosity if the 'Preserve scale' did the job I need).
    Thank you
    Daniel

  • Is there a way to access my voicemail without having to enter my password every time?

    Is there a way to access my voicemail without having to enter my password every time?  Or is the only way to check emails is to click on the voicemail icon and enter password?

    For that, you would probably have to create a contact and place it on your homescreen. I don't know if there are any settings where you can have the voicemail icon automatically call, although there may be. You can name the contact you place on your homescreen "call voicemail" or "voicemail", though.
    Edit: keep in mind by setting up your voicemail number like I had previously described, anyone with access to your phone will now have access to your voicemails. If you are like me, though, that won't bother you.

  • Is there any way to access the pages templates that were there six months ago. The one I used for my recipes is not there.

    Is there any way to access the Pages app templetes that were there six months ago? The one I used for my recipes is no longer there.

    What was the name of the recipe template?
    Or was it one you created yourself.
    It helps when you tell us that you upgraded both your OS and Pages, which it appears you have done.
    Possibly even changing your Mac or iOS device. Which is it btw?
    Probably you have a new Pages which has only a fraction of the templates, because it has a fraction of the features.
    Peter

Maybe you are looking for