Is there a way to access photo information when viewing on iPhone?

Using iPhone 5S/ IOS 7.1.1. In iPhoto I have edited my pictures with information (i.e., name of photo, description). I would like to access (at least) the name of photo/file on my iPhone. Any way to see the photo file name on phone?

I cannot believe this problem hasn't been rectified yet!
If I use the pre installed ringtone as an alarm and set it low so I don't jump out of my skin, then my call volume is too low the next day, so have to change it.
If I use a song as an alarm, I have the same problem, but its when I watch a video. I set it quiet, then jump out of my skin the next morning if I've left it tuned up after watching YouTube. Also works the other way if I've watched a video with the sound down, and forget to turn it back up, then I don't hear my alarm, which makes me late!
It could also do with an ascending volume option, so it starts nice and quiet to wake you gradually. My old phones from pre iPhone days had these features and they worked great.
Surely this isn't that much of an issue to sort out. Yet I've seen posts back as far as 2006 complaining about it.
Come on apple pull your finger out!

Similar Messages

HT4236 Is there a way to recover photos lost when phone is accidently restored?

I recently restored my Iphone by mistake. Is there a way to recover my lost photos?

If the photos were not imported by your computer and your iPhone's backup was not updated to include the photos prior to restoring the iPhone, the photos are gone unless you had Photo Stream enabled with your iCloud account settings on the iPhone and all photos in the Camera Roll were copied to your Photo Stream prior to the restore.
iTunes does not handle the import of photos/videos on the Camera Roll.
http://support.apple.com/kb/ht4083

Is there a way to sync photos from macbook air to iPhone wirelessly.

I want my images from macbook to synch with iPad, iPhone automatically once I put it on my laptop. Is this possible. I don't want to have to connect my iPad or iPhone to my macbook air once i have pictures to upload.
thanks.

Yes. See iCloud: My Photo Stream FAQ
There are also 3rd party apps such as: http://www.photosync-app.com

Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

Can't remember my security questions and can't access my back up email address is there a way of getting the information sent to another email?

No. You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103501)

In photos (iphoto) in 10.10.3 on macbook Air I lost the adjustment graph option. Am left with nearly useless choices w no fine tuning. Is there a way to access better adjustment?

In photos (iphoto) in 10.10.3 on macbook Air I lost the adjustment graph option. I'm left with nearly useless choices w no fine tuning. Is there a way to access better adjustment as in iPhoto?

In photos (iphoto) in 10.10.3 on macbook Air I lost the adjustment graph option. I'm left with nearly useless choices w no fine tuning. Is there a way to access better adjustment as in iPhoto?

Is there any way to transfer photos from ipod touch (2nd generation

Is there any way to transfer photos from ipod touch (2nd generation & OS is 4.2.1) to PC? I am struggling a lot. The OS cannot be upgradable beyond 4.2.1
I am wondering if there could be many other ways to transfer the photos like:
1. with the help of any android app
2. ipod touch to iphone/ipod latest version
3. any 3rd party free softwares (there are paid 3rd party softwares but I dont want to invest)
I did try some of the options:
1. I could emailed only 6 photos in one email (I have almost 800 photos and would be time consuming.
2. I'm trying to access my google account on my ipod but it keeps coming up with "oops! your browser seems to have cookies disabled..." My cookies are not disabled. Safari is the only browser for ipod touch and could not be able to installed not only any new browser but also any iphone apps. Updates for the existing apps not possible at all. So this option of uploading the photos on google drive is ruled out.
Anybody is there to help me out? Sorry for such a long inventory.
Thank you!

If they are in the iPod' Saved Photos album then:
iOS: Importing personal photos and videos from iOS devices to your computer
If they were synced to the iPod you need a third-party program like TouchCopy or PhoneView

Is there a way to get photo from a blocked "Photoshop Album 3.0" with Ps?

Is there a way to get photos from a blocked "Photoshop Album 3.0" with Ps?

If you are on a Mac, you can use File Juicer to extract image files from just about anything.
Next time you post, please give more specific details.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, including total VRAM installed, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

I recently saved a draft email using mail, but now whenever I try to reopen it, it says loading but will not load. All my other drafts load fine except for this one. Is there a way to access the draft outside of mail?

Create a new profile as a test to check if your current profile is causing the problems. <br>
See '''Creating a profile''':
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem <br>
'''Profile Backup and Restore'''
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Is there a way to access more of my codecs to render with in AE 4.1 ?

Hi all,
I'm a new user using an old version of AE 4.1 on Windows 7.
Is there a way to access more of my available codecs to render with in AE 4.1 ?
When I go to export as an AVI file in AE 4.1 I only have the CINEPAK, DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs available as choices, and then NONE for uncompressed output.
Yet when I render to AVI in Adobe Premiere I have the CAMSTUDIO LOSSLESS, CINEPAK, HUFFYUV, INTEL IYUV, LAGARITH LOSSLESS, MICROSOFT RLE, MICROSOFT VIDEO 1, MSU SCREEN CAPTURE LOSSLESS, x264VFW-H.264/MPEG-4 AVC and the XVID MPEG-4 codecs all available to render with. I usually use the XVID MPEG-4 codec to render with for best quality for file size, or the LAGARITH LOSSLESS codec to render with if I need to plug a file back in to Premiere since Premiere has limited AVI file codec import capabilities.
Why aren't the rest of my codecs available to render with in AE 4.1 ?
The problems are (as seen in the screenshots below)...
1) The CINEPAK codec renders the correct file format size and aspect-ratio that my project is (1280x720) but outputs an AVI file that can not be imported in to Premiere and can not be converted by two different converters.
2) The NONE-UNCOMPRESSED option renders the correct size format file but outputs an AVI file so large (over 6 gigs) that it can not be use practically in Premiere and it will not even play in a video player.
3) The DV-PAL, DV/DVCPRO-NTSC and DVCPRO-PAL codecs render in incorrect aspect ratio and format sizes (770x576) regardless of which aspect ratio is selected (as seen at the bottom of the screenshot below), resizing my project size and they will not import in to Premiere... these can be converted to an H.264 AVI file in one of my converters that Premeire will then import, but they are still the wrong size and they loose sharpness if they are resized (stretched) during conversion.
Please see the screenshots below for clarification.
Thanks for any input,
digi

Wow, thanks again Andrew. That works.
All my codecs showing up via Composition/Make Movie. Its weird, when I tried using the H.264 codec (Premiere likes H.264 and Lagarith Lossless), the H.264 rendered a strange 800 and something by 720 size instead of the selected and displayed 1280x720 format that the project is in and speced in the Render interface.
But when I used the Lagarith Lossless codec, I get the right size and everything looks good at 1280x720.
Before you wrote back, I was able to convert one of the 770x576 size DV-PAL files to H.264 via the Freemake converter, and then that imported in to my Premiere file... but that is a moot point now that I can get the correct size file with the Lagarith codec.
I would have been able to use the converted 770x576 (properties says 720x576, but it measures out at 770x576) DV-PAL files for this project with the digital clock and get it to import in to Premiere correctly... since I could just place the clock face when blackscreened in my 1280x720 Premiere project, but now I can use the full size Lagarith rendered file for this and other projects from AE that require the full frame of composition.
Thanks so much... your the most efficient forum guy I've ever had answer a question... no restating or misunderstanding... just pure useful answers.
Thanks a trillion,
digi

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

Is there a way to transfer photos from a point and shoot camera to a flash drive via the iPad?

No.

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Not using iPhoto - Aperture can or iPhoto Library Manager can
LN

Is there a way to access the "Creative Cloud Clipboard" repository outside Adobe Line/Sketch Apps?

Is there a way to access the "Creative Cloud Clipboard" repository outside Adobe Line/Sketch Apps?
For instance via (macbookpro) web, local directory (CC desktop), or mobile web? As opposed to Utilizing the feature purely in Adobe line/sketch?
I mean... I know i could just take screen shots... via the iPad's protocol. However, that would defeat the purpose of creative cloud.
The point of accessing the creative cloud clipboard, is so that I can create Time-Lapse .GIF's of my drawings, Using the "timeline" feature (undo)....which is amazing feature btw.
Honestly the solution for me... would be to have an option to export a .GIF (animated), .tiff sequence, or video file (m4a mov). I would say export options would be 1. File Size & Type (Context...) 2. Detail, # of Slides (How long is your timeline, what do you want to show, what level of detail?) 3. Share (Behance, Creative Cloud Files, MMS, iMessage, etc... 4. Open in... Photoshop, Aftereffects etc...
I think this would be great for..tutorials, multi-media, prototyping (wireframes, character design, etc). So, i'm not saying this should be a heavy set...focal point of the application, after all an animation app all itself would be nice. However, I think a feature like an "interactive timeline" would push users to be even more creative, by hacking, creating ghetto rigged *** backwards ways of prototyping that...actually might be more convenient. This is the story Adobe is trying to tell, the story of process, whats in your head... in the moment. Thats why behance is integrated, because process & feedback + exposure are essential to developing as a creative, so Adobe has put together a great platform...for its users. So, yeah...Adobe.. here's your chance to gain a greater insight into creative process, and integrate it directly into the creative cloud platform. I think it would be huge for Ink & Slide , Behance, and Student-Teacher / Designer- Company relationship.
"Share | Project Timeline " "Intervals | # of images" "Crop | Length (time)" "Crop | Project Area (artboard?)"
Yeah this question took a left turn...but hey.... either or.
EDITS............
***You can copy images to creative cloud files....via the share function in ADOBE SKETCH... thats how I made the .gifs im going to attach.***
***However, in ADOBE LINE, if you try to copy multiple images of the same project, they do not receive unique filenames, thus replacing all images in the saved sequence****

First, to answer your initial question - no there is no way to access the clipboard content outside of the apps at this time.
The idea of exporting a timelapse is very interesting, and something we have been thinking about, but there are already some decent ways to do this. Check out this video of a drawing in Line created by Brian Yap Adobe Ink and Adobe Line Illustration - YouTube
You can create this kind of video using several of the available apps that let you display your iPad screen on your computer using Airple. Some examples are Reflector http://www.airsquirrels.com/reflector/ and AirServer http://www.airserver.com/

I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

I set up a passcode to ensure the security of my iPhone 5 but, when I enter it on the home screen, I repeatedly receive an error message and my phone locks. Is there a way to reset the passcode when I am unable to gain access to my phone?

I figured that was the case, but I've used the same passcode for years and I can't seem to figure out how I managed to screw it up when I set up my phone. Without being able to access my phone for a restore, how would I accomplish this? iTunes? Thank you very much for you help!

Is there a way to place an encrypted document on the iPhone, a document that contains passwords and private information, really well protected from hackers?

Is there a way to place an encrypted document on the iPhone, a document that contains passwords and private information, really well protected from hackers?
Can such a document be exempted from the cloud feature, a feature that I use for the rest of my stuff?
If so, how can I do this?

Yeah, but 1Password charges for both the iPhone client AND the Mac/Windows client, and it ain't cheap! Plus, it only syncs via Dropbox, and where I work Dropbox is banned due to security concerns.
Sure, there is Secure Notes, a free form entry part of 1Password, but a bug in the program will not let you view all the text you can put in the field!! You have to EDIT the text to see the whole list! What if you accidentally delete or change an entry while scrolling through your entries??
Plus NONE of the programs I have tried, and I have tried a lot, can find text IN the file - do a search and it will tell you what file/folder the text is in, but YOU have to scroll down through 400 entries one at a time looking for the entry.
I use a program called Secure Text - I have many admin passwords, and DO not need a field based program. Secure Text is totally freeform entry. However, it suffers from the same search issue.
If someone knows of a secure text program that uses a file/folder type of layout, free form entry, AND can actually tell you where in the file/folder the text you searched for is, PLEASE let me know! Plus sycing via some method other than Dropbox would be a plus.
Before I got my iPhone, I used a program called Tombo for my WinCE based system AND my Windows workstation, and the synced up fine without iTunes, internet, DropBox type functionality or any of that horsecoller stuff Apple likes to throw on your neck.

Is there a way to access my old Notes only? I still have my old back up but I cant sync to my phone or it will corrupt it.

I am using an iphone 5. Recently it malfunctioned and I was told by apple that my old back up had a corruption with it an caused my phone to malfunction. Apple had to redownload the operating system. I was also told that I can not use my old back on my phone I need to delete it and manually download everything. I DID NOT USE ICLOUD. However I do have my old back up still on my mac in itunes. Question below....
Is there a way to access my old Notes only so I can rewrite them in my phone? I still have my old back up but I cant sync to my phone or it will corrupt it. I just want to access my notes so I can type them back into my notes on my fixed phone.

you can restore from your backup again just to get the notes. once you've restored from the backup, copy your notes into your icloud notes group or email them to yourself - basically, get them somewhere else so they're not just locally stored on the device. once you've moved your notes elsewhere, restore the device as new again like apple had you do. this will again put a fresh version of the operating system on your phone like it has right now
there's no other way to access the notes that are in your backup

Is there a way to access photo information when viewing on iPhone?

Similar Messages

Maybe you are looking for