Is there a way to activate "sticky Keys" or a delayed response feature on iPad 2?

Is there a way to activate "sticky keys" or a delayed response feature on iPad 2? I am using it as an AAC device with a child I work with and they are tapping the icon repeatedly, I am looking to slow this response time down to .5 second delay.

No, not at this time.

Similar Messages

Is there a way to clean sticky keys on keyboard after liquid splash?

Recently some wine splashed on my keyboard and now about 50% of the keys are sticky. Is is possible to clean the keyboard or am I in the market for a replacement?
Thanks for any help.

A spill is sometimes hard to clean up. But this article is very complete in its scope > Clean your Apple products - Apple Support - ÇÇÇ

The "Find Faces" function is deactivated on iPhoto 9.5, in OSX Mavericks. Is there any way to activate / deactivate this function?

Hello,
Instead of deactivting the "Find Faces" Function, I would like iPhoto 9.5.1 to run this.
On my MacBook Aluminium Late 2008, running Mavericks 10.9.3 this function is grayed out, and never run.
Is there a way to activate this function?

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
defaults read -app iPhoto PKFaceDetectionEnabled | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Is there a way to detect two keys at the same time?

Is there a way to detect the keys if the user is holding two keys down at the same time?

yes, but you'll have to check outside of the event loop (i.e. don't check for it in the keyPressed method).
just use an array of keys that keeps track of which keys are currently down and which are up. you could use a boolean array but I use an int array because... Im not sure I've just done it probably because of my C background. anyway, basic setup:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
public class MultiKey extends JFrame {
     int keys[];
     public MultiKey() {
          super();
          keys = new int[256];
          Arrays.fill(keys,0); // 0 = key is up
          enableEvents(AWTEvent.KEY_EVENT_MASK);
          show();
     public void processKeyEvent(KeyEvent e) {
          // the 0xff below binds the key code to below 256
          int key = (e.getKeyCode()&0xff);
          if (e.getID() == KeyEvent.KEY_PRESSED) {
               keys[key] = 1; // 1 = key is down
          else if (e.getID() == KeyEvent.KEY_RELEASED) {
               keys[key] = 0; // 0 = key is up
     protected boolean isKeyDown(int key) {
          return (keys[key] != 0);
     protected boolean isKeyUp(int key) {
          return (keys[key] == 0);
}so now at any time in your code you can check key state by using the isKeyUp and isKeyDown methods. this is about as close as you get to input polling in java unless you use LWJGL or something similiar ;)
you can try out a full executable example at my site here - just open up the jar and start holding keys down :)

Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component CA *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END : Content from Application Component CA *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
   BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
     Start of subsequent processing ... 20140423011359
     End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

__ Is there a way to adjust the key commands for switching channels in curves?

__ Is there a way to adjust the key commands for switching channels in curves?
By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
Thanks,
Hugh

Hi,
You can find the CS4 plug-in here:
http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
It's inline in tis post with some more background info:
http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
regards,
steve

Is there a way to change the key photo on iPhoto Faces?

Hi
The picture on the corkboard for each person appears to be the first photo you identify for that person.
Is there any way to change the key photo, like you can do with Events?
Thanks
Dave

Thanks very much!
I hadn't realised you can do that on Events, I have always right clicked on it and brought up the option to Change key Photo. That doesn't work the same way n Faces, so thanks for the Space Bar trick.
All the best
Dave

Is there a way to clean the keys?

Hey guys, I accidentally spilt some OJ on my Powerbook, while it was closed, but somehow a couple of my keys must have got a little bit of the juice on them, and a couple of them are now sticking a little. They still work, but I can tell that they are not punching in as normal as the others. Is there a way to pop a key off to clean them underneath??
Thanks for your help in advance!

Welcome to the discussions, drewser.
Popping a key off a PowerBook keyboard is a scary affair. The plastic tabs that hold them is place are very delicate, and the keys themselves bend slightly because they are so thin. Do it with great caution!
Here's how the keyboard removal guide at PB FixIt describe the process:
This is scary - take a deep breath before continuing. Place your index finger under the upper left corner of the key and lift up until you hear a click. Then, transfer your finger to the left edge of the key and lift up to pull the key off.
You're freeing the two tabs on the left of the key from the two small holes in the plastic scissors mechanism.
When replacing the keys in the keyboard, place the key directly over the slot where it will go and press down until you hear the key click into place.
I've only ever done it a couple of times myself. nothing broke, but it wasn't fun.

Is there a way to activate facetime without pusing a button/touching the screen? Can you voice activate?

Is there a way to activate facetime without pusing a button/touching the screen? Can you voice activate? I just bought the newest i-pad.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Hello all...is there a way to activate(on startup) /deactivate(on logoff) CS6 Suite using a script, Active Directory Login Script or central Management Tool?

hello all...is there a way to activate(on startup) /deactivate(on logoff) CS6 Suite using a script, Active Directory Login Script or central Management Tool?

The long answer is: No. this is Adobe's secret sauce and you cannot manage it using other tools.
Mylenium

Is there a way once I have brought a movie from iTunes on my iPad to download it onto my laptop.

Is there a way once I have brought a movie from iTunes on my iPad to download it onto my laptop

You should in future download to iTune (computer) and sync to iPad.

Is there a way to create DVDs from movies made in iMovie on the iPad?

Is there a way to create DVDs from movies made in iMovie on the iPad? I have a PC. Thanks

King_Penguin wrote:
There are third-party browser apps that have settings within them to identify themselves as full browsers e.g. Atomic Web, and I believe the iCab Mobile browser also does (I don't have it so i can't check)
iCab indeed does allow for that

Is there a way to limit the frequency of the "autosaving drafts" feature in Mac Mail on Lion?

Using Mail Version 5.0 (1244.2/1244.3)
On MacBook Pro with Lion 10.7.1
Wondering if Is there a way to limit the frequency of the "autosaving drafts" feature in Mac Mail on Lion?
Looked all thru preferences and googled the crap out of this and can't seem to find the answer I want.
Basically, I have my mailbox behaviors set up exactly the way I want them. (ie deleted messages get saved to my "Trash" folder on the server) I do not think I should have to change them, but because of the autosave feature saving almost every 3 characters typed, I have an over abundance of versions saved in my Trash folder. This problem would be solved were there a preference somewhere I could select to save drafts "manually only" or "opened messages save when quitting" or something along those lines.
Is this a preference setting already that I am missing?
I would settle for a rule, just not sure what perameters should be set for this to work.
Help

Typically a server has a settable parameter to limit concurrent connections. Check the server's documentation.

Is there a way to open form as if from different responsibility in R12

Is there a way to open form as if from different responsibility in R12. Have tried to call FND_GLOBAL.apps_initialize but it did not changed a thing.

*"Is there any way I can send her messages back and make it look as though my email address no longer exists? "*
"Message" menu --> Bounce

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

You need a third party app. Take a look at some of these on this Google page.
Open zip files on iPad

Is there a way to activate "sticky Keys" or a delayed response feature on iPad 2?

Similar Messages

Maybe you are looking for