Is there a way to add a toolbar seperator?

Hi there,
Is there a way to add a toolbar seperator on the toolbar before adding a
custom button?
Ming

Steve,
Although you can't do it in mail, You can still open the stand alone Contacts app and command click them then drag and drop them into the "To" field like you use to. I know its not ideal but it will allow you to do it similar to what you want.
Also I would let Apple know and give them feedback on this. https://www.apple.com/feedback/macosx.html
Hope that helps,
Weston

Similar Messages

Is there a way to add a font button to the toolbar in RH 10

Is there a way to add a font button to the toolbar in RH 10

Thanks Rick! I made the request, and I'll keep my fingers crossed
Date: Fri, 20 Sep 2013 07:56:45 -0700
From: [email protected]
To: [email protected]
Subject: Is there a way to add a font button to the toolbar in RH 10
    Re: Is there a way to add a font button to the toolbar in RH 10
    created by Captiv8r in RoboHelp - View the full discussion
Hello again
The bottom line here is that it IS possible to add a button for this to the CHM toolbar. This is described at the link below:
Click here to view
The possibly bad news here is that RoboHelp doesn't lend itself to easily allowing you to do it. I tried a few times yesterday with no success.
If you are willing to make edits in RoboHelp, then step outside of RoboHelp and use the Microsoft HTML Help Workshop to compile your CHM, you might be able to achieve it.
I would also heartily encourage you (and others) to file this as an enhancement request with Adobe.
http://www.adobe.com/go/wish
Cheers... Rick
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5699471#5699471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5699471#5699471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5699471#5699471. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in RoboHelp by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

In Firefox, the Skins toolbar is not displaying correctly. Is there any way to add padding to fix it

The Skins toolbar looks great in Internet Explorer and Chrome, but Firefox does not have any padding around the toolbar buttons (see picture). Is there a way to add padding?
Thanks for your help,
Colleen

Hello again
Your response makes me wonder if you misunderstood me. Especially the bit about "transparent" buttons. Because that's precisely what I was suggesting. Add the "padding" you want, by adding some transparent area at the bottom of the buttons. That way the appearance should be that the buttons have some blank space below where the image ends and the divider.
At least that's what I interpreted you to be wanting.
Cheers... Rick

Is there a way to customize the toolbar/ruler in TextEdit? i.e. add buttons

I've become so annoyed by various aspects and quirks of MicrosoftWord that I'm trying to wean myself off it and migrate over to TextEdit as a simpler, faster and more stable day-to-day default word processing program.
In TextEdit's "Rich Text" mode, with the ruler/toolbar showing, there are only a few standard drop-down menus and buttons: Styles, Paragraph-align, Spacing and Lists. Is there a way to add new buttons or drop-down menus to this default selection? One of the few nice things about MSWord is that one could customize the toolbar. I'd expecially like to add simpler font-formatting buttons like "Strikethru" and font-sizes to TextEdit. I realize these things can be accessed via the "Fonts" floating window (command-T), but that's a whole extra keystroke and having to reach across the screen.
I presume there isn't a way to add these custom formatting buttons, but I just wanted to make sure.

You might like to try Bean, as a neat and simple WP - I'm a fan.
http://www.bean-osx.com/Bean.html

I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year. Some how the birthday did not populate the photo calendar. Is there a way to add the birthday iCal calendar into the calendar project?

I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M

Is there a way to add two windows in the same window?

is there a way to add two windows in the same window?

what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values.. ninety! yes that many.
Change one bloody value and the prototype changes in the TestStand step... Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults! AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal. But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!! AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or... ... something??!!??!???!!
If there are none, I will have to post an improvement to TestStand.. I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile.
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Is there a way to add/delete words from the predictive text ?

Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
Any help would be appreciated.

999753 wrote:
I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
is there a way to add delete into 9i MERGE? or somehow encapsulate it?
Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

Is there a way to add a single jar to an existing shared library (war)?

Hello,
Is there a way to add a single jar to an existing and already deployed shared library (war) in weblogic directly?
Basically, instead of building and deploying the war each time a new jar should be added to the list of jars present in the war and deploy it in weblogic, is it possible to make the process more automatic and efficient by just adding the new jar to the existing deployed war (no matter if the consumers must be reloaded)?

Extract the WAR file and rearchive with theJAR file included.

Is there a way to add roman numerals to the footer? (eg. page i of n)

Is there a way to add roman numerals to the footer? (eg. page i of n)

Hi Emily ,
You may face challenges doing this task in Acrobat .
If you have created the PDF from word ,I would recommend doing the page numbering in Word, not Acrobat, since you have more flexibility with that program.
Or the second option is ,if you know how to play around with java script.Here is the code for the same.
Yeah, it's possible. Create a unique text field on each page with this code as the custom calculation code:
event.value = romanize(event.target.page+1);
Then place this function at the doc-level (I didn't write that one):
function romanize(num) {
    if (!+num)
        return false;
    var digits = String(+num).split(""),
        key = ["","C","CC","CCC","CD","D","DC","DCC","DCCC","CM",
               "","X","XX","XXX","XL","L","LX","LXX","LXXX","XC",
               "","I","II","III","IV","V","VI","VII","VIII","IX"],
        roman = "",
        i = 3;
    while (i--)
        roman = (key[+digits.pop() + (i * 10)] || "") + roman;
    return Array(+digits.join("") + 1).join("M") + roman;
Regards
Sukrit Dhingra

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

or is there a way to upload the digital copy to store in my iCloud account?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Is there any way to add PO no and corresponding line item of PO in VL32N?

Hello,
The scenario is, we have created the IBD and deleted one of the line item and saved it.
We went to VL32N and added the missing line item to IBD but PO number and corresponding item number of PO field of newly added line items are grayed out. We are not able to add PO number in VL32N screen.
Is there any way to add PO number and corresponding line item of PO in VL32N screen of IBD? Our client does not want to create new IBD for same PO. He wants to add the line item in same IBD.
Thanks,
Milind
Edited by: Csaba Szommer on Aug 27, 2011 4:52 PM

Hello,
This thread is pending since long time. No body has answered my question. Can any body suggest me?
Thanks
Milind

HT202929 Is there a way to add a hyperlink to a collection of books or to all books of an author?

Is there a way to add a hyperlink to a collection of books or to all books of an author?
On iPad, a iBook link to iTunes won't work, as it opens iTunes Store instead of iBooks Store.
I can't even find a way to copy a link to a search on iBook Store...

You can't install more storage space later. You get 30 days (I believe) to decide if you are unhappy with a phone and return it for a refund. After that there is no trade-in option. You have to see if you can sell it (tricky) and buy a new one.

Is there a way to add a toolbar seperator?

Similar Messages

Maybe you are looking for