Is there a way to add an entire list of words at one time to persdict.dat?

I added an entire list of words (several hundreds) to persdict.dat each word on a separate line then saved the file and all looked OK. However, none of those words are recognized as OK by Firefox's spell check. Clearly, that's not the way to do it. It seems one must use the "Add to dictionary" thingie FOR EACH WORD, WORD BY WORD in order for it to be recognized by Firefox's spell check. There has to be a better way.

I solved the problem a couple days ago. The mistake I made was that I neglected to shut Firefox down before making the changes to persdict.dat. Once I did that, everything worked as I expected it to work after bringing Firefox up again. I guess that's the equivalent of what you suggested. Thanks for your response.

Similar Messages

  • Is there any way to disable Home Sharing on all computers at one time? I've put Home Sharing on 5 computers already, and I don't have one of the computers anymore.

    Is there any way to disable Home Sharing on all computers at one time? I've put Home Sharing on 5 computers already, and I don't have one of the computers anymore.

    nm
    Copy/Pasted:
    You can deauthorize all computers connected to your Apple ID if you've reached the maximum five authorizations:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
    EE

  • Is there a way to add multiple search bars visible at the same time (Amazon, Ebay, etc.) rather than clicking through them?

    Like, instead of clicking to pick the one you want, have 3 or 4 available on the toolbar all the time. I saw something called Thinger that does it, but that was from Firefox 3.

    Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
    No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one.

  • HT2513 Is there a way to see who made an appointment and at what time/on what date they made it? Kind of like a date/time stamp for our network calendar?

    Is there a way to see who made an appointment and what time/on what date they made it? Kind of like a date/time stamp for our network version of iCal? Everyone has all rights and privledges to everyone else's calendar, and sometimes we need to know who did what to whose.

    Christine,
    You can also ask in the Typography forum,
    http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
    The guy running whatfontis is a regular poster there.
    And apart from
    http://www.whatfontis.com/
    there are
    http://www.identifont.com/
    http://new.myfonts.com/WhatTheFont/
    and especially for script,
    http://www.bowfinprintworks.com/ScriptIDGuide.html

  • Is there a way to put fades on multiple audio regions at one time?

    is there a way to put in and out fades on multiple audio regions at one time?
    thanks!
    Luke.

    absolutely brilliant!
    you just saved me a lot of time.
    thank you!!
    Luke.

  • Is there a way to convert an entire PDF doc (not just one page) to two-tone (blue)?

    I know how to convert a page at a time to blue, but need to be able to do entire documents.  Is it possible?

    It would be best to convert in the program that was used to originally create the PDF file. Or you can use a PDF file editor.
    Photoshop is not a PDF file editor. Photoshop is a PDF file rasterizer .

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way to add two windows in the same window?

    is there a way to add two windows in the same window?

    what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
    or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

  • Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

    Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
    I have a cluster with 90 values..  ninety!  yes that many.
    Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
    All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
    If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
    more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
    I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
    Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
    If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

    Hmmmmmmmmmmmmmmmm,
    I am not not very famous with LV and its cluster types.
    So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
    Make a copy of the step that has to be modified to an new sequencefile. 
    Make modifications the in the copy.
    Now you should have the same DataType Name but other contents in the container. Save it.
    Normally there should be a message box that tells you that version has been incremented. - Accept it.
    Set in StationOptions-File "Allow Automatic ...." to Never.
    Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
    You have updated the type.....
    Hope this worked,
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • Is there a way to add/delete words from the predictive text ?

    Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
    There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
    Any help would be appreciated.

    999753 wrote:
    I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
    is there a way to add delete into 9i MERGE? or somehow encapsulate it?
    Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
    And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

  • Is there a way to download an entire shared photo stream to your iOS device from the url?

    I recently dropped my iPhone, resulting in a pretty total breaking of it. Luckily, apply care is awesome and I got my phone replaced the next day. My only issue is that I lost the ~3000 photos I had taken on a recent trip to Japan. These photos were saved on a photo stream that was then shared with others that went on the trip, however. My question is: is there a way to download that entire stream back onto my iPhone? Where I am I do not have internet access a lot of the time, and would like access to those photos all the time, as I would be able to if they were saved on my phone.
    Thanks

    Hello Jmask09,
    Indeed, photos can be downloaded to your iPhone. Videos, however, cannot be downloaded to your device.
    Can photos and videos be saved or downloaded from a shared album?
    Yes. After photos are shared, anyone who can view the shared album can download and keep them permanently. Videos can only be downloaded to a Mac or PC. On an iOS device, videos are streamed from iCloud and can't be downloaded.
    On a compatible iOS device, you can save photos to your Photos tab or Camera Roll.
    iCloud Photo Sharing FAQ
    http://support.apple.com/en-us/HT202786
    Cheers,
    Allen

  • Is there a way to view an ENTIRE event?

    In the old iCal when you selected an event it was displayed in the right side panel. The new iCal doesn't do that and when I double click to see the event the new window only shows the first 4 lines of the event. I use iCal to save the info for the jobs I'm doing, and it's kind of annoying to have to scroll down ten lines to find out where I'm supposed to go. Is there any way to view the ENTIRE event? Maybe even to have it show up in the side panel the way it used to?
    thanks

    There is a 'Location' field in the event record that is displayed only if it contains an entry.
    In a quick test, I was able to create a new event and display at least 7 lines of text in the Location field when I clicked on the event and then touched the space bar to display the details.
    The Event Name field still only displays the first four lines of text, unless you double click and scroll, as you have been doing.

  • Is there a way to add a single jar to an existing shared library (war)?

    Hello,
    Is there a way to add a single jar to an existing and already deployed shared library (war) in weblogic directly?
    Basically, instead of building and deploying the war each time a new jar should be added to the list of jars present in the war and deploy it in weblogic, is it possible to make the process more automatic and efficient by just adding the new jar to the existing deployed war (no matter if the consumers must be reloaded)?

    Extract the WAR file and rearchive with theJAR file included.

  • Is there a way to add roman numerals to the footer? (eg. page i of n)

    Is there a way to add roman numerals to the footer? (eg. page i of n)

    Hi Emily ,
    You may face challenges doing this task in Acrobat .
    If you have created the PDF from word ,I would recommend doing the page numbering in Word, not Acrobat, since you have more flexibility with that program.
    Or the second option is ,if you know how to play around with java script.Here is the code for the same.
    Yeah, it's possible. Create a unique text field on each page with this code as the custom calculation code:
    event.value = romanize(event.target.page+1);
    Then place this function at the doc-level (I didn't write that one):
    function romanize(num) {
        if (!+num)
            return false;
        var digits = String(+num).split(""),
            key = ["","C","CC","CCC","CD","D","DC","DCC","DCCC","CM",
                   "","X","XX","XXX","XL","L","LX","LXX","LXXX","XC",
                   "","I","II","III","IV","V","VI","VII","VIII","IX"],
            roman = "",
            i = 3;
        while (i--)
            roman = (key[+digits.pop() + (i * 10)] || "") + roman;
        return Array(+digits.join("") + 1).join("M") + roman;
    Regards
    Sukrit Dhingra

Maybe you are looking for