Is there a way to add an outline to a shape made using brush tool with Actionscript 3.0?

I'm animating a character. I've made body parts by making a rectangle, removing the line outline, then adding extra sides by holding the Alt key and dragging out to make the shape I desire. I prefer not to make all the shapes I make into symbols because I want to 'Shape Tween' certain parts. One thing I do want however is an outline on that shape, but not the 'Line tool' type of line if that makes sense? An outline that is made by another shape by use of code! Can this be done?

Have you tried the ink bottle tool (click and hold the Paint Bucket and you should see it)?
Note that you can't reference objects through code that you can't refer to. You may be able to dig through the display list and find the Shape and apply code to it, but I think that Shapes get combined and composited in ways you might not expect. In addition, you may find that Shapes get replaced while animating.

Similar Messages

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

or is there a way to upload the digital copy to store in my iCloud account?

Is there a way to add your signature to text messages without typing it in with each one on the Iphone 4S?

Is there a way to add your signature to your texts on the Iphone 4S, without typing it in on each text? Heard this was a mistake on the Iphone 4S--hope i is fixed by now....

Just discovered how to do it: Go to Mail, Contacts, Calendars, scroll down to Signature: and where it says "from my Iphone on messages - delete it and add your name, and/or phone no--whatever you like...doesn't take up much space...This is apparently the "fix" the Iphone 4S did....
It did not originally come out with that on it...now it is there - must have come in an update..
Thanks for all your help!

Is there a way to add multiple outlines on the same layer?

Hi there! I'm trying to add an outline to text or objects through the style fx, then I want to add more outlines. It would be nice if you could just add a new stroke like in illustrator. I don't want copy the layer and just do a thicker outline behind it, the point is to have it all on the same layer .. just wondering if thats possible. Thanks!

You have been given two approaches which may meet your needs. There is another way that offers independent control of the styles, but you do use multiple layers.
Assume you have a path that defines your object and lets say you want to apply three different styles and have independent and ongoing control over each. Create a new blank layer for each style. On each of those layers apply a brush stroke to the path, say a 1 pixel stroke whose color is also the background color as an example. Now on each of those layers apply your chosen layer styles. That is what I have done in this example:
Paulo

Is there a way to add an expression to a shape layer's individual groups?

See the screenshot below to see what I'm working with. I want to add a slight wiggle expression to each leaf to give it some life, as if there's a calm breeze. Is there a way to do this?

Tim Kurkoski wrote:
An expression that links the rotation property of the groups to a master group, or a null, is a good idea.
You can also nest all of the groups inside another group, and apply the transformation to this parent group.
Also remember that in addition to expressions, there is a Wiggle Transform property for shape layers. This would best be utilized for all of your groups if they are nested into a parent group, to which you would add the Wiggle Transform.
I want each group—aka leaf—to move independently, so applying the expression to the group didn't work right for me, as they all kind of move in unison

There is a choice of various languages in the keyboard. Is there any way to add further symbols or emoticons to the existing keyboard along with the language being used?

How to add symbols like emoticons and others to the keyboard in operation

206157 wrote:
How to add symbols like emoticons and others to the keyboard in operation
For things not in the Emoji keyboard, you can use an app like Cymbola, Unicode Map, etc.

I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year. Some how the birthday did not populate the photo calendar. Is there a way to add the birthday iCal calendar into the calendar project?

I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M

Is there a way to add two windows in the same window?

is there a way to add two windows in the same window?

what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values.. ninety! yes that many.
Change one bloody value and the prototype changes in the TestStand step... Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults! AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal. But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!! AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or... ... something??!!??!???!!
If there are none, I will have to post an improvement to TestStand.. I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile.
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Is there a way to add/delete words from the predictive text ?

Is there a way to add/delete words from the predictive text options that my iPhone is giving me? I'm using an iPhone 6 Plus with iOS 8.
There are specific words that are popping up in the area right above the keyboard where it displays 3 word suggestions to choose from. This area seems to suggest words that I have typed before, I'd like to remove these words. Default seems to select the word in the center and when I'm typing fast on occasion it will recommend and select words that I don't need to use.
Any help would be appreciated.

999753 wrote:
I know in 10g delete is added but in 9i i can only work with UPSERT( update, insert)
is there a way to add delete into 9i MERGE? or somehow encapsulate it?
Thank youI would suggest upgrading to a supported version of the database. 9i has been unsupported for many many years now.
And to answer your question... to the best of my knowledge, there is no workaround. It works as it works.

Is there a way to add a single jar to an existing shared library (war)?

Hello,
Is there a way to add a single jar to an existing and already deployed shared library (war) in weblogic directly?
Basically, instead of building and deploying the war each time a new jar should be added to the list of jars present in the war and deploy it in weblogic, is it possible to make the process more automatic and efficient by just adding the new jar to the existing deployed war (no matter if the consumers must be reloaded)?

Extract the WAR file and rearchive with theJAR file included.

Is there a way to add roman numerals to the footer? (eg. page i of n)

Is there a way to add roman numerals to the footer? (eg. page i of n)

Hi Emily ,
You may face challenges doing this task in Acrobat .
If you have created the PDF from word ,I would recommend doing the page numbering in Word, not Acrobat, since you have more flexibility with that program.
Or the second option is ,if you know how to play around with java script.Here is the code for the same.
Yeah, it's possible. Create a unique text field on each page with this code as the custom calculation code:
event.value = romanize(event.target.page+1);
Then place this function at the doc-level (I didn't write that one):
function romanize(num) {
    if (!+num)
        return false;
    var digits = String(+num).split(""),
        key = ["","C","CC","CCC","CD","D","DC","DCC","DCCC","CM",
               "","X","XX","XXX","XL","L","LX","LXX","LXXX","XC",
               "","I","II","III","IV","V","VI","VII","VIII","IX"],
        roman = "",
        i = 3;
    while (i--)
        roman = (key[+digits.pop() + (i * 10)] || "") + roman;
    return Array(+digits.join("") + 1).join("M") + roman;
Regards
Sukrit Dhingra

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Is there any way to add PO no and corresponding line item of PO in VL32N?

Hello,
The scenario is, we have created the IBD and deleted one of the line item and saved it.
We went to VL32N and added the missing line item to IBD but PO number and corresponding item number of PO field of newly added line items are grayed out. We are not able to add PO number in VL32N screen.
Is there any way to add PO number and corresponding line item of PO in VL32N screen of IBD? Our client does not want to create new IBD for same PO. He wants to add the line item in same IBD.
Thanks,
Milind
Edited by: Csaba Szommer on Aug 27, 2011 4:52 PM

Hello,
This thread is pending since long time. No body has answered my question. Can any body suggest me?
Thanks
Milind

Is there a way to add an outline to a shape made using brush tool with Actionscript 3.0?

Similar Messages

Maybe you are looking for