Is there a way to add multiple search bars visible at the same time (Amazon, Ebay, etc.) rather than clicking through them?
Like, instead of clicking to pick the one you want, have 3 or 4 available on the toolbar all the time. I saw something called Thinger that does it, but that was from Firefox 3.
Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one.
Similar Messages
-
Is there a way to choose multiple "send to" addresses at the same time?
I would like to send mass e-mails to different people from my contact list for different topics, picking the addresses each time rather than using a group. I have found the " + " sign for accessing the contact list, but I can't figure out how to select more than one address at a time (and then having to go back to the " + " sign to select the next contact, etc. Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one. -
Is there a way to rename multiple files in finder at the same time?
for example, I have a group of pictures that I want to all start with the word "start" and be listed as "start1, start2, etc" Is this possible to do as a group versus having to individaully renaming every picture?
There are some third-party renamers, or you can use an Automator Workflow.
Start Automator and create a new Workflow.
Drag in a Get Selected Finder Items Action.
Drag in a Rename Finder Items Action. It will ask if you want to copy the items so that you don't alter the originals. Since you want to actually rename the originals, don't add that action.
Set the parameters for the Rename. If you want to be able to reuse that workflow for different things, click the Options button and set it to show the action when the workflow runs. From your example, choose Make Sequential. Start with a new name and number it after the name.
Save it so you can recall it when needed.
Select your files and Run the workflow.
You could also create it as a Service so that you can select files, then ctrl-click to select the workflow from the contextual menu. If you want that, set the Service to receive Files and Fodlers in the Finder.
Skip step 1 (or delete it if you are converting it to a Service), but do the rest above. Save it with a short name so you can easily find it. It will appear in the Services submenu of the contextual menu. -
Is there a way to open multiple childs of Accordian at a same time
Hi,
Is there a way to open multiple childs of Accordain at a same time.
My requiremnets is something like this:--
Thanks for any help on this in Advance.
Regards
MuniraYou can have multiple nodes open on a tree, so I guess you could open them all up on a button click.
Another option that might be possible is to use individual Accordians for each section and then use the click function to close the others. -
Is there any way to load just ONE java application at the same time?
I'm using 'jnlp' to load java applications and I want to load just one application at the same time.
Is there any way to do that?
I have been trying to use 'findLoadedClass' but it doesn't work.
Also I've tried to make a file when a application is loading and delete when the application exits.
but it has a problem when the user terminates the application.
(the file can't be deleted...)
The applications are using socket to receive data, all of them uses same port. That's why I want to load just one application at a time, otherwise they work wrong way.Do you actually mean you want to make sure that only one instance of a GIVEN Java program is running at one time? If so then search this forum becuse this question comes up frequently.
-
Is there a way to replace, on a list of folders at the same time, underscore between title words on a folder with a space? If someone has the know how could they please explain in real simple to follow way for somebody not good with Mac .... Thanks
You need a "bulk renamer" to do this.
I personally use ABetterFinderRename, but there are cheaper and some that are free. ABFR has a free trial.
Renamer4Mac is cheap. Check the App Store too. -
Is there a way for me to open 2 emails at the same time?
I often want to refer to a previous email or work on more than one email at a time. Mail seems to only allow one email to be open on the desk top at a time. What am I over looking? Thanks for your help.
Thank you for your comment. I should have said email drafts, whether it be a response to an email I received or a new one I'm creating. If I've got one email draft open it doesn't seem like I can do anything else in mail but complete the draft. I'm not able to view other emails or have more than one draft open at a time. Thoughts?
-
Dispatch center - Select multiple tasks for scheduling at the same time
Hi!
I need a consultation regarding Dispatch center. Is there a functionality to select multiple tasks for scheduling at the same time for one resource?
Please, guys, this is urgent.
JanYou can schedule a single task or multiple tasks automatically directly from the
dispatch center. The scheduling criteria applied come from Advanced Scheduler.
Make Sure, you have the advanced scheduler. With out Advanced Scheduler and by just using Advice, you can only assign one task at a time.
HTH
ps: for more information, refer Field Service User Guide, "Scheduling Tasks" -
Is there a way to add multiple agents to a skill group at once?
Hi All,
Is there a way to add multiple agents to a skill group at once by using bulk edit or some other means?
I am using ICM 8.0
Thanks in advance.Hi Piyush,
There is a tricky way of doing it in the config manager. Say for example, if you have 100 agents to be added, rename the agent so that they get listed first while adding to the skill group. This will reduce the effort of searching the agents. You can scroll and select the total number of agents till it is renamed and revert back once added to the skill groups
Hope this helps
Cheers,
Dass
Please rate useful posts -
Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.
Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message. -
Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?
Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already. -
Is there a way to add images , text and button in the individual marquee of a carousel
Is there a way to add images , text and button in the individual marquee of a carousel ?
Write a custom carousel. Usually carousel components are just ULs that use something like jQuery to rotate through the LIs. The foundation carousel component is really just designed for some specific use cases. Generally I would just recommend rolling your own.
-
HELP! Is there a way to change column information in iTunes such as name of artist, genre etc, other than deleting them one at a time? Such as the way you delete an entire group of songs by holding down control keys or selecting the Select All command. Thanks.
If you select all the songs you want to change, Be it one song or an akbum, or an Artist, Or Genre, or playlist. Then Right mouse click and Get Info. You then get a slightly different from normal Get Info box as this is the One for Multiple items.
In there have a look at the tags and see if the one you want to changes is in there. There are a few tabs so if for example you wanted to change the Media Type from Home Movie to Movie go to the Options tab and select Movie and OK and it will change the whole selection. -
Is there a way to snap cut/edited portions together on the same track rather than manually having to drag them together? To elaborate, if I have a 3 minute track of raw audio and I edit out the middle 30 seconds of it I am left with two tracks with a "30 second" area that has no file. To join them manually I can click and drag one portion of the audio until I match it with the other section but instead, is there a shortcut or function that I could select that automatically marries up the cut portions of the track, thereby eliminating the 30 second gap?
Yes: hold the control key while deleting (or select "delete and move" from the Edit menu.)
-
Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?
I don't think you can do that the volume is universal, but maybe turn down the volumes in the app settings?
Maybe you are looking for
-
Not all my playlists and voice memos are transfering to my Ipod
I have a 5th generation Ipod and when I am doing a sync, my voice memos and some of my playlists are not transfering from my computer to my Ipod. They are checked but just not transfering...I'm sooooo frustrated. Any suggestions? Thank you!
-
How to handle empty field in idoc to file scenario
some field of IDoc is empty, there occurs error. like <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:vendor_list/vendor[3]/company_cod
-
LR3 not retaining attributes after trip thru ext. editor
Unless I'm missing some setting somewhere, LR3 does not retain the image attributes (color label, star rating) on a new file created as a result of a trip thru an external editor, ie PS. LR2 did. workflow: in LR3, filter down to your (for example) 4
-
HP touchsmart adding graphics card
I have a question. I have HP touchsmart computer, model 520-1070 uk with integrated graphics card HD 2000. Can I add better HD graphics card in format MXM to my computer ? It's very important to me, please help ! This question was solved. View Soluti
-
Im using FCPX 10.1.3 I insert a freeze frame for a clip in my video. I am overlaying a smaller picture over the freeze frame. I would like to freeze frame to blur while the picture is being displayed over the freeze frame. I almost positive Ive done