Is there a way to add music to a keynote

hi
is there a way to take a section of a song on itunes and add it to a slideshow in keynote(mac version)?

Yes.
See Chapter 6 of the Keynote '09 User Guide for details http://support.apple.com/manuals/#keynote
A piece of music can be added as the background to your entire slide show by inserting it into the Document Inspector>Audio Tab. This music will play across more than one slide. Only one song can be installed this way, so if you want a different song to start a few slides in, then you will have to create a seperate presentation with that music and create a hyperlink from the last slide of the first set to the new presentation. This process can be repeated. Just remember that all of the presentations need to be opened (in the background) for the links to work smoothly. Volume for each slide show is set in the Document>Audio Inspector.
If you only want a part of a song to play across all slides, the audio file must be edited outside of Keynote and the edited audio file inserted in the Document>Audio Inspector.
If you just want a segment of music to play on one slide, you can drag the sound file from your Media Browser directly on to the slide - you will see a speaker icon. With the icon selected, you can trim the start/stop points using the QuickTime Inspector. You can also set the volume there.

Similar Messages

  • TA38607 Is there a way to add music to a call you are holding

    What I thinking was;
    1st caller: I'm having conversation and there is another call so I put (caller 1) on hold to answer (caller 2)
    2nd caller: While talking to (caller 2), (caller 1) is now on hold, What I would like is to be able to make it so that there is music that I have set (caller 1) is now listening to.
    Also if I mute the call this may be good to have.
    Not sure if this can already be done, I have tried a spot of good old googling but it seems harder to find that most.

    Cool that was quick.
    I thought though and probably way off, but the calls are beeing held on the iphone and you basically have two calls,
    would it not be possible that there is an loop of music playing on say another line and by pressing to hold the call all you do is merge the the caller with that line. or there abouts

  • I have an ebook in ITunes that is showing up under Music more Genres Audiobooks, and I would like for it to go in the IBook app. I just added to my phone, is there a way to add this book to that app.?

    I have an ebook in ITunes that is showing up under Music>more>Genres>Audiobooks, and I would like for it to go in the IBook app. I just added to my phone, is there a way to add this book to that app.? 

    Sioux7 wrote:
    I have an ebook in ITunes that is showing up under Music>more>Genres>Audiobooks
    Audiobooks go in Music, not ibooks.   Is the book you are talking about not an audiobook but an .epub or some other format where you read text?

  • HT1689 Is there a way to put music that you have on a flash drive that you didn't get off of iTunes on your iPhone?

    Is there a way to put music that you have on a flash drive that you didn't get off of iTunes onto your iPhone?

    Add the music from your flash drive to your itunes media libary, then sync your phone to itunes.

  • Is There Any Way to Add Back the Sidebar in 12.01?

    Is there any way to add back the sidebar in iTunes 12.01 like there was in iTunes 11?

    Thanks.  It appears that the sidebar appears only when I click on the Playlists option under whatever item I've selected.  If I have a device connected, it shows up in the bar that starts with music, movies, and TV shows.  If I think click on Playlists, the device appears in the sidebar too like it used to. 

  • I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year.  Some how the birthday did not populate the photo calendar.  Is there a way to add the birthday iCal calendar into the calendar project?

    I created a birthday calendar to use in iphoto for calendar.  When a new calendar project is started each year, I click on it in.  Some how the birthday did not populate the photo calendar this year.  The photo calendar is almost complete.  Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

    Hi,
    If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
    Best wishes
    John M

  • Is there a way to add two windows in the same window?

    is there a way to add two windows in the same window?

    what do you mean by your first use of the word "window"? do you mean a visible frame? a section of the gui that the user doesnt see?
    or perhaps you mean you want to add multiple tabs to a single window, so that switching between tabs shows different windows?

  • Is there a way to play music on my iphone (4) without it being interrupted by phone calls?

    Is there a way to play music on my iphone 4s without it being interrupted by phone calls?

    Settings > Airplane Mode > ON

  • Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

    Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
    I have a cluster with 90 values..  ninety!  yes that many.
    Change one bloody value and the prototype changes in the TestStand step...  Reload the prototype and guess what happens??!!??
    All the bloody values get reset to defaults!  AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
    If it was in one place, I could survive the ordeal.  But I have to change bloody prototypes in many places!!!!
    more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
    I can't even copy the bloody values!!!!!!!  AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
    Are there any tricks that I am not aware of, or have forgotten over the years, or...  ...   something??!!??!???!!
    If there are none, I will have to post an improvement to TestStand..  I should mention I am using an older version (4.1).

    Hmmmmmmmmmmmmmmmm,
    I am not not very famous with LV and its cluster types.
    So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
    Make a copy of the step that has to be modified to an new sequencefile. 
    Make modifications the in the copy.
    Now you should have the same DataType Name but other contents in the container. Save it.
    Normally there should be a message box that tells you that version has been incremented. - Accept it.
    Set in StationOptions-File "Allow Automatic ...." to Never.
    Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all  "Use Current Loaded.."
    You have updated the type.....
    Hope this worked,
    Juergen
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

  • Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.

    Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address?  This necessitates constantly going back to click the + sign to add each address separately.  Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time?  Something like it works in Gmail.  I do not want to use set lists, I want to enter different addresses each time I send an email.  And I am a very slow typist, so I don't want to type the first few letters of each recipient's name.  It is much faster for me to just click on the e-mail addresses in the list as a group.  It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group.  If there is a solution to this, please tell me.  Thanks.

    Vatlily,
    Try this:
    1. Select Mail>File>New Message.
    2. Select Mail>Window>Address Panel.
    3. Use (command+click) on the desired addressees in the Address Panel to create the list.
    4. Click "To:" on the top left of the Address Panel.
    The group that you selected will be added to the "To" field in your New Message.

  • My wife and I have shared one iTunes account for 6  years.  We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc.  Is there a way to move music/apps from one ID to a new ID?

    My wife and I have shared one iTunes account for 6  years.  We want to create our own Apple IDs, so when we sync to our new iMac we won't see each others contacts, photos, calendar, music, etc.  Is there a way to move music/apps from one ID to a new ID?

    JoeyV325 wrote:
    Is there a way to move music/apps from one ID to a new ID?
    No.
    One of you create a new AppleID and one use the existing AppleID.
    But you can still use the items in each iTunes library.
    Create separate computer logins for each of you.
    This will give you each your own data. Contacts, calendars, photos, etc. (and your own iTunes library).

  • Is there a way to import music from my ipod to the computer?

    is there a way to import music from my ipod to the camputer?
    I have music from all over the world and i want to import all of it to my computer..

    Sorry for insulting Apple. This whole thing has me frustrated. You would think that this is an easy thing...which it is after downloading the third party software and all.
    I am just a bit edgy after talking to 3 customer support folks for almost 2 hours, who I could barely understand and then having them just tell me to download the files again. 3500+ songs...jumping out the window was looking more pleasant (jk). Now I have to explain to the wife why the phone is busted in-two...lol.
    Anyway, I was able to get hooked up with some software and it seems to be downloading fine. I am using iPodCopy. Thanks for the nudge in the right direction and putting up with a bit of attitude. I am sure they have their reasons for not making this an easier operation.

  • Is there a way to import music from my windows media player, if so how?

    Is there a way to import music from my windows media player, if so how?

    Exploter the settings in Windows Media Player. It should tell where it is currently storing files. You can also enable the path column in WMP to see where individual tracks are stored. See also Getting iTunes & Windows Media Player to play nicely.
    tt2

  • Is there a way to move music from my Iphone 3gs to the Itunes on my computer without deleting it?

    Is there a way to move music from my Iphoe 3GS to the Itunes on my Windows 7 laptop? The hard drive of the laptop had been corrupted so it was replaced which makes the computer now register as being a new one alltogether.

    If you still have the old drive you (or a helpful friend) may be able put it in an external drive bay and extract your iTunes library and other personal data from it. Otherwise see Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT1848 Is there a way to transfer music FROM my iPod TO my computer / online music library?  I have almost songs on my iPod but less than 500 on my computer / iTunes / online library.

    Is there a way to transfer music FROM my iPod TO my computer / online music library?  I have almost songs on my iPod but less than 500 on my computer / iTunes / online library.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

Maybe you are looking for