Is there a way to add new objects to object changeability list?

My production system is locked and I need to change object type RSFO (formula). I looked at the object changeability list and it does not contain RSFO. Is there a way to add this object to this list so I can change it directly in production? Thanks.

hi,
I hope you can create similar formula in the production. as in the production we can change the reports,proces chain,aggregates, infopackages.
Ramesh

Similar Messages

__ Is there a way to add new art boards to an existing document?

Is there a way to add new art boards to an existing document (same dimensions and same space betwen artboards)?
What I do now is I have to create a new file (with new number of artboards) and cut & paste - is there another way to do this?
Thanks.

What Illy version?
File > Document Setup > "Edit Artboards" button (top, right)
Before entering Edit Artboard mode though, draw boxes at the right size and at the right locations as your desired new artboards so you can snap to them. While in Edit Artboard, anything other drawing boxes will cause you to exit it.
Tip: Alt+Left Click to convert a slected shape to an Artboard, while in Edit Artboard mode.
EVEN EASIER:
Draw out your new Artboards in normal mode, select them > Object > Artboards > Convert to Artboards.
*EDIT Larry's a ninja.

Best way to add new objects to a Group?

I have been trying to figure out how to keep things organized in the timeline. Which is very important when you get very complicated. If I pick a group and then an obj and hit the group tool, it makes a new group instead of just having it added to the original. The only work around I have found is to ungroup the first group and then everything is nested in the new group. That is a pain.......I would love to just select an object with my middle mouse, just drag it into a group in the timeline. Or is there an easier way?
Don

I have been trying to figure out how to keep things organized in the timeline. Which is very important when you get very complicated. If I pick a group and then an obj and hit the group tool, it makes a new group instead of just having it added to the original. The only work around I have found is to ungroup the first group and then everything is nested in the new group. That is a pain.......I would love to just select an object with my middle mouse, just drag it into a group in the timeline. Or is there an easier way?
Don

Is there a way to add new photos into an existing collection even though they are located in a different folder in Lightroom?

I am trying to add my favorite photos that are currently located in multiple folders in Lightroom into a single Collection and am not able to do so. I also do not understand the concept of a Collection Set, which might be the solution here. Any assistance would be appreciated. Thanks!

A Collection is the way to provide a quick link to any group of images you select. (Maybe ones you want to sent to a printer, or email, etc)
A Collection does not make a second copy of your images. Collections appear like folders, but the thumbnails in a collection are only "links" to your original images.
Any Development edits you do to images from a Collection set will show the edits in the Library grid view.
Collections are great for any projects like a Book, or Slideshow, etc.
To place image links in a Collection:
Method 1)   "easy"
First- (if you have created a collection set by the + on the Collection PANEL HEADER)- Right-click the collection NAME in the Collection Panel and choose "Set as Target Collection".
   This will place a small + sign to the right of the Collection NAME. (you only need to do this once to 'Set as Target')
Next- (In the library grid view, this can be "All" photographs.!!))- Select one or multiple images, Press the "B" key.
    This will (Bounce, Bump, Bag, Bop) selected images into your "Target Collection"
    So if you select ALL your favourites with ALL photographs visible in grid- you can do it with ONE press of the "B" key.
Method 2) "almost as easy"
Select one or multiple images in the Library Grid view.
Position your mouse cursor in the middle of one of the selected images, hold a left-click and drag your images 'onto' the collection NAME.
(Note: this does not work if you drag from the border frame of an image.)

Is there a way to add an app to a wish list in the iPad?

I owned an HP touchpad for a brief period and it had this option. It was very useful when searching the many apps available in a particular category. Where is this feature in the iPad? Thank you.

As far as I know (I havn't found a way yet anyway) you can only add to it and view it via iTunes on your computer. You can provide feedback to Apple : http://www.apple.com/feedback/ipad.html

Whether there is a simple way to add new Mapping operators on a mapping?

Whether there is a simple way to add new Mapping operators on existing mapping?
For example I have a mapping, but now I need to add new Filter or Aggregator operator, so I must delete all connections between attributes, then add new operator, connect source attributes to the input attribute for the operator and so on.
Is there way to turn down this operations, simply drop new operator on source object or on a connection between two objects, and necessary operations will be automatically executed.
As I remember in OWB2 something similar existed in a way to add new Filter operator.

Dmitry,
Unfortunately there is not. What you should aim for, is to use the group-by-group mapping using match by name (with some additional options, such as ignore source/target prefix, suffix, etc.).
I.e. if you want to insert another operator, then I recommend you first populate attributes based on an operator that is currently on the mapping delete the old operator (to delete all connections), map into the new operator and add another operator in order to re-create what you previously had. I know it is not ideal... but in my experience it is the most productive way to work.
Thanks,
Mark.

In Firefox 10, is there a way to add two "Open a new tab" buttons like in Firefox 3.6?

In Firefox 10, is there a way to add two "Open a new tab" buttons like in Firefox 3.6?

This UI change is really stupid and useless. People got used to some specified menu items order. Changing this order could only annoy and anger.
Also the reload button has been relocated. This is another example of stupid Firefox 4 UI change. The good news is that it could easily be relocated to its original place.
It looks like the Firefox developers are suffering from idleness and boredom.
CHANGE IT BACK ASAP!!!

Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?

Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?

Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?
Depending on your choice of workflows, it appears you can still
1) Add chapter marks manually with QT 7 Pro,
2) Add chapter markers graphically using GarageBand,
3) Use a video editor to set chapter markers graphically,
4) Use a DVD conversion/burning app to set specific or add equi-interval chapter markers, or
5) Use a media/device player that adds playback only chapter makers when no chapter track is embedded within the file.
What kind of chapter markers are you referring to here? Mine are not "stripped out" during normal use but can be automatically removed during various conversion workflows.

I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year. Some how the birthday did not populate the photo calendar. Is there a way to add the birthday iCal calendar into the calendar project?

I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?

Is there a way to add to the existing values in a container when a LabVIEW prototype (cluster) changes?
I have a cluster with 90 values.. ninety! yes that many.
Change one bloody value and the prototype changes in the TestStand step... Reload the prototype and guess what happens??!!??
All the bloody values get reset to defaults! AAAAAAAAAAAAAARRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGGGGGHHHHHHHHHHHH!
If it was in one place, I could survive the ordeal. But I have to change bloody prototypes in many places!!!!
more AAAAAAAAAAARRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!
I can't even copy the bloody values!!!!!!! AAAAAAAAAAAARRRRRRRRRRRRRRGGGGGGGGGGGHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!
Are there any tricks that I am not aware of, or have forgotten over the years, or... ... something??!!??!???!!
If there are none, I will have to post an improvement to TestStand.. I should mention I am using an older version (4.1).

Hmmmmmmmmmmmmmmmm,
I am not not very famous with LV and its cluster types.
So no idea if this works (it works for DataTypes updates very well and a LV cluster is Data Type so.... maybe)
Make a copy of the step that has to be modified to an new sequencefile.
Make modifications the in the copy.
Now you should have the same DataType Name but other contents in the container. Save it.
Normally there should be a message box that tells you that version has been incremented. - Accept it.
Set in StationOptions-File "Allow Automatic ...." to Never.
Open original sequencefile. Now the there must be a type conflict. Accept/Apply to all "Use Current Loaded.."
You have updated the type.....
Hope this worked,
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

Is there a way to create new Barcodes for Adobe Printforms

Hi All,
As far I know there is currently no way to add new barcodes to the Adobe designer..SAP Note #430887 says the same..
Can I get any exact SAP note which states that adding new barcodes is not currently possible..
If there is any way we can do this please let me know..
Appreciate your time..
Thanks,
Sethu

Hi,
I hope this will help you.
MW6 Barcode DLL for SAP R/3 is compatible with SAPsprint and SAPlpd, it allows you to print 1D barcodes.
Example:
Code39, Code128, EAN13, EAN8, UPCA and UPCE,
PDF417, DataMatrix, Aztec and QRCode virtually on any windows printer from SAP R/3 system.
TBarCode/SAPwin is a Barcode DLL for SAP R/3, SAP ECC and mySAP ERP. This barcode DLL extends SAPsprint, SAPlpd and SAPWIN DLL with barcode printing features.
TBarCode/SAPwin prints ALL common linear and 2D bar codes on all Windows printers.
Costly barcode equipment like barcode cartridges, barcode fonts or barcode printers are avoided! TBarCode/SAPwin works with SAPscript, ABAP and SmartForms. All SAP-forms are supported without modification.
Thanks

Is there a way to add a single jar to an existing shared library (war)?

Hello,
Is there a way to add a single jar to an existing and already deployed shared library (war) in weblogic directly?
Basically, instead of building and deploying the war each time a new jar should be added to the list of jars present in the war and deploy it in weblogic, is it possible to make the process more automatic and efficient by just adding the new jar to the existing deployed war (no matter if the consumers must be reloaded)?

Extract the WAR file and rearchive with theJAR file included.

Is there any way to disable the objects owned by a user?

Hai every body....My problem is..
I had created 60 users granting them connect and resource privileges in oracle(8.1.5.0.0).All of the users are working under their logins(users)...Every thing is going fine...But now i wanted to disable the objects owned by those users
(60 Users) for a period of 2 days,After that i wanted to enable them....Is there any way to disable the objects owned by them with out dropping the users?(The users should be able to work as prevoiusly on the new objects they will create after i disabled the objetcts owned by them previously)?

hi
if my understanding is right you want to disable the users for 2 days for any reason let say he is on holiday for 2 days then why dont u lock this user and submit the job for unlock after two days.
Khurram Siddiqui
[email protected]

Is there any way to add PO no and corresponding line item of PO in VL32N?

Hello,
The scenario is, we have created the IBD and deleted one of the line item and saved it.
We went to VL32N and added the missing line item to IBD but PO number and corresponding item number of PO field of newly added line items are grayed out. We are not able to add PO number in VL32N screen.
Is there any way to add PO number and corresponding line item of PO in VL32N screen of IBD? Our client does not want to create new IBD for same PO. He wants to add the line item in same IBD.
Thanks,
Milind
Edited by: Csaba Szommer on Aug 27, 2011 4:52 PM

Hello,
This thread is pending since long time. No body has answered my question. Can any body suggest me?
Thanks
Milind

Is there a way to add new objects to object changeability list?

Similar Messages

Maybe you are looking for