Is there a way to add photos to the iPad without replacing the ones already loaded? I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

Is there a way to ADD photos to my iPad without replacing the ones already there? I am trying to add photos from a computer that does not contain photos already synced to the device.

You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

Similar Messages

How do I create a stand-alone execute out of my teststand sequence? I need to run the execute on a computer that does not have the tesstand application installed on it.

I would also like to use the teststand basic gui window wich asks for the serial number and then runs the tests without seeing the teststand environment in the background
ie I would like the test to look simple to the user without building a new gui.
Sincerely
Aik Lewin

Hi,
You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
Once you have created your installation, install is on your new system.
The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
Hope this helps
Ray Farmer
Regards
Ray Farmer

How can I update cluster items from inside a while loop that does not contain the cluster?

I have a VI that contains front panel clusters and two while loops. The main cluster contains items such as a doubles "distance" and "stepsize" and boolean "step" (a whole buch of this type stuff). The first loop contains an event structure to detect front panel changes and the second contains code and sub VIs to perform operations based on detected events.
The operator can enter data into either double or click the boolean. If distance is changed the second loop does what is required to process the change. The same happens with stepsize. If step is clicked the ±stepsize value is added to distance and the result is processed. In each case the front panel should track the result of the input and subsequent processing.
Because the clusters are outside the while loop, they are not updated unless I click 'highlight execution' which seems to allow updating each time the execution highlight is updated. There are other issues if I move the clusters into one of the loops.
I've tried referencing the clusters and using local variables and nothing works. It looks like overkill to use shared variables for this.
Any ideas would be greatly appreciated.
Thanks,
Frank

Hi Ben,
Thank you for the response. I followed the link and tried reading everything you posted on AEs but I'm afraid that I didn't understand it all. It seems that each AE example had a single input and a single output (e.g. a double). Is this the case?
What I have is a couple of front panel clusters containing (approximately) 18 control doubles, 8 indicator doubles, 5 boolean radio button constructs and 26 boolean control discretes. I clusterized it to make it readable. In addition I'll eventually have a cluster of task references for hardware handles.
All I want to do is update the front panel values like I would do in a C, VB or any other language. I've tried referencing the cluster and using the reference from inside the loops. I've tied using local variables. Neither works. I'm experimenting with globals but it seems that I have to construct the front panel in the gloabal and then I wouldn't know how to repoduce that on the front panel of the main VI. Sometimes it seems that more time is spent getting around Labview constructs than benefitting from them.
I hope the 'Add Attachment' function actuals puts a copy of the VI here and not a link to it.
Thanks again for the suggestion,
Frank
Attachments:
Front Panel Reference.vi ‏33 KB

Is there a way to increase the icon size (and the text below) without using zoom? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Is there a way to increase the icon size (and the text below) without using zoom in iOS 7? I am trying to help out someone who has moderate visual impairment that does not want to use zoom just to see the icons and their labels.

Hello Apple.
It seems you have gone to great lengths to improve accessibility in many areas of the iPad. Why was this obvious problem with icon text size missed? (It's not with the Mac.). And for so long too.
Do you employ people with actual accessibility problems to help you do UI design?
I think too, that some buttons are too close for people who might have motor control problems.
I love my iPad but I fear as I age, the iPad might not keep up with me.

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

In an effort to restore my iPad with iTunes on a computer that is not synced to my iPad, it tells me that I must have the passcode, which I do not remember. What do I do now?

In an effort to restore my iPad with iTunes on a computer that is not synced to my iPad, it tells me that I must have the passcode, which I do not remember. What do I do now?

You will need to restore the iPad using Recovery Mode. Since you are using a computer that you have never synced with in the past, you will have to erase the device and will lose all content. You will be able to download your purchased content as long as you use the same Apple ID that you bought the content with in the first place - as long as the content is still available and the downloading of past purchases is available in your country.
Recovery Mode explained here ...
Downloading past purchases

HT1766 An Apple consultant said I could get rid of itune playlist from my ipad by connecting the cable from my ipad to a computer that does not have songs from itunes in its computer. I was not able to do it. Any suggestions?

How do you get rid of itunes playlist from my ipad? I was told you can sync it back to a computer that does not have any itunes songs. It did not work.

I'm sure I don't completely understand the question.
How to get rid of an iTunes playlist from your iPad? Just delete the items while using iTunes. The next time you sync, they'll be gone from your playlist.

HT1212 My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity.

My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

Is there any way to play an iTunes rented movie from my mac on a tv that does not support HDCP?

No.

I am at a computer that does not have my music library. I have a CD that I want to add to my iphone. The only music on this compi=uter is the new CD I just bought. Everything I do seems to suggests that my entire iphone library will be replaced

Help

Hi istillFrustrated,
If you try to sync your device to a new computer that does not have your iTunes Library on it, then it will erase everything on your device and sync whatever is in the iTunes Library on the Computer you are syncing with.
You need to transfer your iTunes Library to the new computer, or you need to burn the CD to the iTunes Library on the computer you normally sync with.
Cheers,
GB

I have about 200 pics that I downloaded onto my iPad 2 from a folder on my computer that crashed recently.How doI update and back up my iPad without losing those pics?

I have about 200 pics that I downloaded onto my iPad 2 from a folder on my computer that crashed recently. How do I update and back up my iPad without losing those pics? Pics of my 4 beautiful kids... do not want to lose these!

What would you have done if you didn't have an iPad?
Photos on your computer should be included with your computer's backup along with all other important data. The iPad is not designed to intended to be a backup storage device.
The transfer of photos from a computer to an iOS device via the iTunes sync process is a one way transfer only - from the computer to the device. Photos are optimized for viewing on the device the photos are being transferred to - the original resolution of the photos is changed, which is why transferring these photos in the opposite direction is not supported.
There are some 3rd party paid utilities that support transferring these photos in the opposite direction.

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Database schema SCM does not contain the associated database objects

I am getting the following error when i am trying to migrate the form to apex using application migration.
"*Database schema SCM does not contain the associated database objects for the project, aafs.*
*Ensure the database schema associated with the project contains the database objects associated with the uploaded Forms Module .XML file(s).* ".
Actully i am having one schema which i named as SCM, and i have defined one table TT.
I created one form test.fmb in which i used TT table.its compiled successfully.
Then i generated the xml file using frmf2xml from fmb file. After that, I created the project in appication migration wizard in SCM schema.
Project creattion is working fine.but when i m trying to create application,it is showing me above error.
can any one help in solving this problem.

Hi Hilary,
Thanks for your response/feedback.
1. The schema associated with the project does not contain the necessary objects Can you please verify that the schema associated with your Forms conversion project does in fact contain the objects associated with the uploaded files. Could you also verify that the object names referenced in the error message do not exist within the schema associated with your workspace. Ensure that the schema associated with the project contains the necessary database objects before proceeding to the generation phase of the conversion process.
Ans:
Yes it does contain the objects (See results from SQL query Commands below):
SELECT MWRA_CONTRACT_NO, OLD_CONTRACT_NO FROM PROJECTS@CONTRACT_LX19.MWRA.NET
ORDER BY MWRA_CONTRACT_NO
000000569 551TA
000000570 553TA
000000575 560TA
000000576 561TA
000107888 502TA
000108498 500TA
000108502 503TA
2. The block being converted contains buttons, which may have been incorrectly identified as database columns, and included in the original or enhanced query associated with your block This is a known issue ,bug 9827853, and a fix will be available in our upcoming 4.0.1 patch release. Some possible solutions to this issue are:
-> delete the buttons before generating the XML
-> delete the button tags from the XML
-> add "DatabaseItem=No" for the button in the XML file before importing it in Apex.The button is excluded when creating the Application.
Ans
yes it does contain push buttons to transfer to another forms and these are defined as Non data base items. Parial XML code provided below:
- <Item Name="REPORTS" FontSize="900" DirtyInfo="true" Height="188" XPosition="4409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="REPORTS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
<Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('REPORT_1');" />
</Item>
- <Item Name="TRACKHDR" FontSize="900" DirtyInfo="true" Height="188" XPosition="3409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="TRACK" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
<Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('TRACKHDRS');" />
</Item>
- <Item Name="SUBAWRD" FontSize="900" DirtyInfo="true" Height="188" XPosition="2429" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3719" FontSpacing="Normal" Label="SUBAWARDS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
3. If you are still experiencing issues, then please create a testcase on apex.oracle.com and update this thread with the workspace details so I can take a look.
Test case details are given below. It was created per ORACLE for open Service Request Number 3-1938902931 on ORACLE Metalink.
Workspace: contract4
username: [email protected] (my email)
Password: contract4
Comments:
For my migration/testing purpose a dabatase link and synonyms have been setup by our ORACLE DBA. Could this be causing this problem?
Do we know when the fix 4.0.1 patch release will be available?
Thanks for your help.
Indra

ITC - Build 1.x.x does not contain the correct beta entitlement.

Hi,
I have a major problem when uploading Builds via the Application Loader (2.9.1) to iTC.
- I use Flash CC 2014 to create my iOS Apps.
- I recreated my certificates, p12 and mobile provisioning profiles.
- I can Upload my Builds via Application Loader without any error messages. Everything is fine here!
- Then in iTC it takes several minutes (5-45) until the Apps Appear.
- I am able to "Add a Build" in the first "Versions" Menu!
BUT in "Prerelease" it looks like this:
... all Builds are marked as "Invalid Binary"
Message: "Build 1.2.2 does not contain the correct beta entitlement. For more information, see the iTunes Connect Developer Guide."
Even though all Builds are marked as "Invalid" they can be selected and I can submit them for review.
... the sad thing is - another App with the same Status "Invalid Binary" is waiting for review for almost 2 weeks now and nothing happens.
Can anyone please tell me what I have to do? It seems Apple does not review Apps with this Status . Normally I get an email from iTUnes connect saying something like:
"Dear developer,
We have discovered one or more issues with your recent delivery for "XYZ". To process your delivery, the following issues must be corrected:
... but this time - NOTHING! :-(
Please help!
Thanks
Jan

You are likely to get better replies by asking in the developer forums (this forum is for questions about using/buying from the store) : https://devforums.apple.com/index.jspa

Is there a way to add photos to the iPad without replacing the ones already loaded? I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

Similar Messages

Maybe you are looking for